Apuí fire, 11 August 2026 Apuí
The fire started on 11 August 2026 in Apuí, Brazil, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,489 hectares from heat detections, spread across a single municipality.
It is the 104th largest in Amazonas since 2016 (of 450 with a page). Number 236 in Brazil in 2026, of 749.
- Burnt area
- 6,489ha
- GWIS perimeter (Copernicus)
- Duration
- 17days
- 11 Aug 2026 – 27 Aug 2026
- Municipalities hit
- 1
- municipalities
- Started on
- 11 Aug
- 2026
- Heat detections
- 421
- in a single hotspot: 139 MW
- Danger at start
- 3
- Very low · FWI index
- Energy released
- 5.7GW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 4.5 mm on 5 Sept.
This area had burned before
91% of the perimeter overlaps earlier fires recorded since 2016: 6,705 ha in 2022, 5,965 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 5,934 ha that had burned before.
What happened to each town
-
6,518 ha reached on 11 Aug0.1 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 11 Aug | 29.5 °C | 69 % | 23 km/h | 3.4 mm | Very low 3 |
| 12 Aug | 31.3 °C | 62 % | 25 km/h | 0.6 mm | Low 6 |
| 13 Aug | 33.8 °C | 50 % | 23 km/h | 0.0 mm | Moderate 13 |
| 14 Aug | 36.8 °C | 28 % | 27 km/h | 0.0 mm | High 28 |
| 15 Aug | 36.9 °C | 22 % | 28 km/h | 0.0 mm | High 33 |
| 16 Aug | 36.4 °C | 33 % | 20 km/h | 0.0 mm | High 30 |
| 17 Aug | 35.2 °C | 44 % | 33 km/h | 0.5 mm | High 28 |
| 18 Aug | 34.5 °C | 45 % | 35 km/h | 0.1 mm | High 23 |
| 19 Aug | 36.8 °C | 35 % | 22 km/h | 0.0 mm | High 26 |
| 20 Aug | 36.9 °C | 33 % | 19 km/h | 0.0 mm | High 26 |
| 21 Aug | 37.1 °C | 32 % | 25 km/h | 0.0 mm | High 29 |
| 22 Aug | 37.0 °C | 33 % | 20 km/h | 0.0 mm | High 28 |
| 23 Aug | 31.4 °C | 65 % | 23 km/h | 0.9 mm | Moderate 12 |
| 24 Aug | 35.6 °C | 41 % | 20 km/h | 0.0 mm | Moderate 21 |
| 25 Aug | 38.1 °C | 27 % | 18 km/h | 0.0 mm | High 30 |
| 26 Aug | 36.8 °C | 36 % | 19 km/h | 0.0 mm | High 30 |
| 27 Aug | 35.3 °C | 45 % | 19 km/h | 1.0 mm | Moderate 18 |
| 28 Aug after | 36.8 °C | 35 % | 20 km/h | 0.0 mm | High 26 |
| 29 Aug after | 37.6 °C | 32 % | 22 km/h | 0.0 mm | High 30 |
| 30 Aug after | 37.3 °C | 33 % | 22 km/h | 0.0 mm | High 30 |
| 31 Aug after | 37.0 °C | 37 % | 20 km/h | 0.0 mm | High 30 |
| 1 Sept after | 37.2 °C | 39 % | 18 km/h | 0.0 mm | High 29 |
| 2 Sept after | 37.0 °C | 37 % | 20 km/h | 0.0 mm | High 30 |
| 3 Sept after | 34.6 °C | 50 % | 23 km/h | 0.8 mm | Moderate 20 |
| 4 Sept after | 35.0 °C | 49 % | 25 km/h | 0.1 mm | Moderate 21 |
| 5 Sept after | 33.7 °C | 54 % | 23 km/h | 4.5 mm | Very low 5 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 23 August 2026 the air beside the fire reached 1,069 µg/m³ of PM2.5. That day averaged 379: 25 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 421Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Apuí fire last?
- GWIS (Copernicus) dates it between 11 August 2026 and 27 August 2026: 17 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,489 hectares (64.9 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Apuí (6,518 ha, 0.1 %).
- What was the weather like?
- During the fire the temperature reached 38.1 °C, humidity dropped to 22 % and gusts hit 35 km/h. The fire danger index (FWI) reached 33, class High.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 193
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.