Apuí fire, 11 August 2026 Apuí
The fire started on 11 August 2026 in Apuí, Brazil, and satellites saw it burning for 24 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,993 hectares from heat detections, spread across a single municipality.
It is the 119th largest in Amazonas since 2016 (of 450 with a page). Number 259 in Brazil in 2026, of 749.
Compare with…
Suggestions: Apuí · 2024Apuí · 2022Apuí · 2021Apuí · 2023
- Burnt area
- 5,993ha
- GWIS perimeter (Copernicus)
- Duration
- 24days
- 11 Aug 2026 – 3 Sept 2026
- Municipalities hit
- 1
- municipalities
- Started on
- 11 Aug
- 2026
- Heat detections
- 340
- in a single hotspot: 446 MW
- Danger at start
- 0
- Very low · FWI index
- Average daily power
- 252MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 3.4 mm on 5 Sept.
This area had burned before
100% of the perimeter overlaps earlier fires recorded since 2016: 854 ha in 2017, 1,246 ha in 2019, 1,232 ha in 2020, 3,227 ha in 2021, 5,641 ha in 2022, 5,523 ha in 2023, 5,676 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 6,006 ha that had burned before.
- 3,933 ha Apuí fire, August 2024 9,050 ha in total; the hectares shown are those it shares with this fire
- 3,510 ha Apuí fire, July 2022 7,938 ha in total; the hectares shown are those it shares with this fire
- 3,127 ha Apuí fire, August 2021 5,385 ha in total; the hectares shown are those it shares with this fire
- 3,069 ha Apuí fire, July 2023 3,714 ha in total; the hectares shown are those it shares with this fire
- 1,342 ha Apuí fire, August 2022 4,567 ha in total; the hectares shown are those it shares with this fire
- 568 ha Apuí fire, August 2019 3,797 ha in total; the hectares shown are those it shares with this fire
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
6,024 ha reached on 11 Aug0.1 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 11 Aug | 29.0 °C | 74 % | 23 km/h | 3.8 mm | Very low 0 |
| 12 Aug | 30.0 °C | 68 % | 25 km/h | 2.9 mm | Very low 1 |
| 13 Aug | 34.0 °C | 49 % | 18 km/h | 0.0 mm | Low 6 |
| 14 Aug | 36.7 °C | 29 % | 29 km/h | 0.0 mm | Moderate 21 |
| 15 Aug | 36.8 °C | 23 % | 27 km/h | 0.0 mm | High 26 |
| 16 Aug | 36.1 °C | 33 % | 19 km/h | 0.0 mm | High 24 |
| 17 Aug | 35.2 °C | 44 % | 34 km/h | 0.4 mm | High 22 |
| 18 Aug | 33.8 °C | 51 % | 32 km/h | 0.0 mm | Moderate 17 |
| 19 Aug | 36.0 °C | 40 % | 19 km/h | 0.0 mm | Moderate 19 |
| 20 Aug | 36.6 °C | 34 % | 17 km/h | 0.0 mm | High 21 |
| 21 Aug | 36.5 °C | 34 % | 24 km/h | 0.0 mm | High 24 |
| 22 Aug | 37.0 °C | 31 % | 22 km/h | 0.0 mm | High 25 |
| 23 Aug | 31.6 °C | 60 % | 25 km/h | 1.0 mm | Moderate 12 |
| 24 Aug | 35.3 °C | 44 % | 23 km/h | 0.1 mm | Moderate 18 |
| 25 Aug | 38.2 °C | 26 % | 19 km/h | 0.0 mm | High 27 |
| 26 Aug | 36.3 °C | 39 % | 20 km/h | 0.0 mm | High 27 |
| 27 Aug | 33.9 °C | 57 % | 25 km/h | 3.8 mm | Very low 5 |
| 28 Aug | 36.2 °C | 39 % | 25 km/h | 0.0 mm | Moderate 18 |
| 29 Aug | 36.8 °C | 35 % | 21 km/h | 0.0 mm | High 22 |
| 30 Aug | 36.7 °C | 39 % | 22 km/h | 0.0 mm | High 23 |
| 31 Aug | 36.7 °C | 39 % | 24 km/h | 0.0 mm | High 24 |
| 1 Sept | 36.5 °C | 41 % | 18 km/h | 0.0 mm | High 22 |
| 2 Sept | 36.2 °C | 43 % | 20 km/h | 0.0 mm | High 24 |
| 3 Sept | 34.0 °C | 58 % | 24 km/h | 4.1 mm | Very low 4 |
| 4 Sept after | 35.0 °C | 49 % | 24 km/h | 0.1 mm | Moderate 12 |
| 5 Sept after | 33.8 °C | 54 % | 22 km/h | 3.4 mm | Very low 4 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · CopernicusOn 23 August 2026 the air beside the fire reached 924 µg/m³ of PM2.5. That day averaged 336: 22 times the WHO daily guideline (15).
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Detections table · 340Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Apuí fire last?
- GWIS (Copernicus) dates it between 11 August 2026 and 3 September 2026: 24 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,993 hectares (59.9 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Apuí (6,024 ha, 0.1 %).
- What was the weather like?
- During the fire the temperature reached 38.2 °C, humidity dropped to 23 % and gusts hit 34 km/h. The fire danger index (FWI) reached 27, class High.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 193 · Emergency number and official warnings ›
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 340 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.