Skip to content
worldfires
BR · Brazil · –

Alto Alegre fire, 9 March 2019 Alto Alegre

Out · last detection 9 Apr 2019, 06:04 UTC

The fire started on 9 March 2019 in Alto Alegre, Brazil, and satellites saw it burning for 32 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 15,049 hectares from heat detections, spread across a single municipality.

It is the 13th largest in Roraima since 2016 (of 111 with a page). Number 87 in Brazil in 2019, of 973.

Burnt area
15,049ha
GWIS perimeter (Copernicus)
Duration
32days
9 Mar 2019 – 9 Apr 2019
Municipalities hit
1
municipalities
Started on
9 Mar
2019
Heat detections
1,068
in a single hotspot: 174 MW
Danger at start
48
Very high · FWI index
Average daily power
230MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 9 Mar9 Apr
9 Apr 2019

How it evolved, day by day

9 Mar 2019 · 3 MW · 2 10 Mar 2019 · 77 MW · 14 11 Mar 2019 · 35 MW · 13 14 Mar 2019 · 14 MW · 4 15 Mar 2019 · 22 MW · 17 16 Mar 2019 · 20 MW · 10 17 Mar 2019 · 292 MW · 36 18 Mar 2019 · 1,408 MW · 63 19 Mar 2019 · 1,822 MW · 175 20 Mar 2019 · 570 MW · 213 21 Mar 2019 · 242 MW · 109 22 Mar 2019 · 84 MW · 19 23 Mar 2019 · 182 MW · 20 24 Mar 2019 · 117 MW · 16 25 Mar 2019 · 52 MW · 30 26 Mar 2019 · 43 MW · 26 27 Mar 2019 · 22 MW · 7 28 Mar 2019 · 256 MW · 32 29 Mar 2019 · 11 MW · 9 31 Mar 2019 · 38 MW · 4 1 Apr 2019 · 896 MW · 169 2 Apr 2019 · 124 MW · 50 3 Apr 2019 · 29 MW · 2 5 Apr 2019 · 21 MW · 11 6 Apr 2019 · 33 MW · 4 7 Apr 2019 · 9 MW · 2 8 Apr 2019 · 17 MW · 7 9 Apr 2019 · 11 MW · 4
9 Mar 19 Mar 29 Mar 6 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
45km/h · peak gust
28%lowest humidity

It had gone 50 days without rain (1 mm or more) when it started. Rain came after the fire: 3.9 mm on 10 Apr.

This area had burned before

50% of the perimeter overlaps earlier fires recorded since 2016: 6,842 ha in 2016, 1,136 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 7,451 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 9.5% of the area of London (150 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Alto Alegre 21,096 inhabitants where it started
    16,237 ha reached on 9 Mar
    0.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area0.76 ha
Residents≈ 30

Inside the perimeter there were about 0.76 hectares of built-up land and about 30 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
9 Mar 35.2 °C 33 % 45 km/h 0.0 mm Very high 48
10 Mar 36.2 °C 30 % 42 km/h 0.0 mm Very high 47
11 Mar 37.0 °C 31 % 39 km/h 0.1 mm Very high 42
12 Mar 33.0 °C 42 % 36 km/h 0.0 mm High 36
13 Mar 35.8 °C 31 % 40 km/h 0.0 mm Very high 41
14 Mar 35.3 °C 36 % 40 km/h 0.0 mm Very high 42
15 Mar 34.1 °C 40 % 42 km/h 2.6 mm Very high 42
16 Mar 35.9 °C 38 % 41 km/h 0.9 mm High 24
17 Mar 35.4 °C 35 % 42 km/h 0.0 mm Very high 42
18 Mar 35.2 °C 34 % 40 km/h 0.0 mm Very high 40
19 Mar 35.8 °C 31 % 36 km/h 0.0 mm Very high 42
20 Mar 36.8 °C 31 % 33 km/h 0.0 mm Very high 41
21 Mar 36.1 °C 36 % 36 km/h 0.0 mm Very high 41
22 Mar 36.3 °C 34 % 36 km/h 0.0 mm Very high 42
23 Mar 36.2 °C 31 % 39 km/h 0.0 mm Very high 45
24 Mar 37.3 °C 28 % 36 km/h 0.0 mm Very high 43
25 Mar 35.8 °C 35 % 34 km/h 0.0 mm Very high 40
26 Mar 35.3 °C 33 % 35 km/h 0.0 mm Very high 42
27 Mar 37.0 °C 32 % 39 km/h 0.0 mm Very high 42
28 Mar 36.9 °C 34 % 37 km/h 0.2 mm Very high 43
29 Mar 36.4 °C 35 % 40 km/h 3.5 mm High 26
30 Mar 33.6 °C 51 % 34 km/h 6.4 mm Low 6
31 Mar 35.6 °C 40 % 29 km/h 0.8 mm Moderate 19
1 Apr 37.1 °C 29 % 34 km/h 0.0 mm High 34
2 Apr 37.0 °C 33 % 31 km/h 0.0 mm High 28
3 Apr 35.0 °C 38 % 27 km/h 0.0 mm High 31
4 Apr 35.0 °C 38 % 30 km/h 0.5 mm High 30
5 Apr 36.2 °C 35 % 37 km/h 0.0 mm High 34
6 Apr 36.0 °C 31 % 37 km/h 0.0 mm High 36
7 Apr 36.0 °C 34 % 38 km/h 0.0 mm High 38
8 Apr 34.6 °C 38 % 28 km/h 0.0 mm High 35
9 Apr 34.3 °C 40 % 24 km/h 0.2 mm High 28
10 Apr after 33.6 °C 47 % 31 km/h 3.9 mm Low 5

Its twins: fires that started in the same weather

It started with an FWI of 48.3, a minimum humidity of 33% and 50 days without rain. Fires in the area that started in weather like this since 2016: 8.

FWI at the start 48.3
Minimum humidity 33 %
Days without rain 50
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Mucajaí fire, February 2024
15,073 ha 12 days FWI 46.4 Min. humidity 33 % 60 km away, in 2024

First rain (1 mm or more) after it ended: 3.0 mm on 2 Mar.

What happened to them

Fires in the area that started in similar weather: 8. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

3.9 mmfirst rain
10 Aprthe day after it ended
45km/h · max. gust

It was considered over on 9 Apr, and on 10 Apr 3.9 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 2 Mar 2019
After · 16 Apr 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,068Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Alto Alegre fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 9 March 2019 to 9 April 2019 (32 days). The perimeter dates it from 14 March 2019 to 9 April 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 15,049 hectares (150.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Alto Alegre (16,237 ha, 0.6 %).
What was the weather like?
During the fire the temperature reached 37.3 °C, humidity dropped to 28 % and gusts hit 45 km/h. The fire danger index (FWI) reached 48, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 16,130 → 15,049 ha.
  2. Start date: 14 March 2019 → 9 March 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 14 March 2019 to 9 April 2019. 1,068 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.