Skip to content
worldfires
BR · Brazil · –

Altamira fire, 18 August 2022 Altamira

Out · last detection 7 Sept 2022, 17:23 UTC

The fire started on 18 August 2022 in Altamira, Brazil, and satellites saw it burning for 21 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 14,362 hectares from heat detections, spread across a single municipality.

It is the 121th largest in Pará since 2016 (of 957 with a page). Number 54 in Brazil in 2022, of 682.

Burnt area
14,362ha
GWIS perimeter (Copernicus)
Duration
21days
18 Aug 2022 – 7 Sept 2022
Municipalities hit
1
municipalities
Started on
18 Aug
2022
Heat detections
1,088
in a single hotspot: 518 MW
Danger at start
37
High · FWI index
Average daily power
1.1GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 18 Aug7 Sept
7 Sept 2022

How it evolved, day by day

18 Aug 2022 · 1,068 MW · 15 19 Aug 2022 · 3,771 MW · 55 20 Aug 2022 · 1,945 MW · 112 21 Aug 2022 · 1,834 MW · 107 22 Aug 2022 · 1,250 MW · 107 23 Aug 2022 · 2,371 MW · 57 24 Aug 2022 · 374 MW · 26 25 Aug 2022 · 76 MW · 10 26 Aug 2022 · 82 MW · 10 27 Aug 2022 · 59 MW · 10 28 Aug 2022 · 5,442 MW · 121 29 Aug 2022 · 891 MW · 102 30 Aug 2022 · 1,787 MW · 63 31 Aug 2022 · 214 MW · 63 1 Sept 2022 · 304 MW · 64 2 Sept 2022 · 649 MW · 68 3 Sept 2022 · 373 MW · 31 4 Sept 2022 · 227 MW · 14 5 Sept 2022 · 158 MW · 31 6 Sept 2022 · 24 MW · 18 7 Sept 2022 · 21 MW · 4
18 Aug 23 Aug 28 Aug 2 Sept 7 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
39km/h · peak gust
18%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 5.5 mm on 16 Sept.

This area had burned before

91% of the perimeter overlaps earlier fires recorded since 2016: 5,409 ha in 2016, 7,876 ha in 2017, 8,338 ha in 2019, 7,954 ha in 2020, 3,789 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 12,999 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 9.1% of the area of London (144 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Altamira 126,279 inhabitants where it started
    15,607 ha reached on 18 Aug
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 55 % of the area in Brazil

Day High Min. humidity Peak gust Rain Danger (FWI)
18 Aug 35.8 °C 27 % 25 km/h 0.0 mm High 37
19 Aug 34.2 °C 35 % 31 km/h 0.0 mm High 37
20 Aug 34.2 °C 29 % 26 km/h 0.0 mm High 37
21 Aug 34.8 °C 23 % 39 km/h 0.0 mm Extreme 52
22 Aug 35.4 °C 21 % 38 km/h 0.0 mm Extreme 57
23 Aug 35.5 °C 24 % 31 km/h 0.0 mm Extreme 51
24 Aug 36.2 °C 25 % 27 km/h 0.0 mm Very high 45
25 Aug 33.2 °C 39 % 31 km/h 0.0 mm Very high 40
26 Aug 34.3 °C 40 % 31 km/h 0.6 mm High 32
27 Aug 34.7 °C 32 % 38 km/h 0.0 mm High 31
28 Aug 35.2 °C 27 % 27 km/h 0.0 mm High 29
29 Aug 37.2 °C 18 % 30 km/h 0.0 mm Very high 45
30 Aug 36.7 °C 23 % 23 km/h 0.0 mm Very high 38
31 Aug 35.5 °C 26 % 26 km/h 0.0 mm Very high 43
1 Sept 36.8 °C 24 % 31 km/h 0.0 mm Very high 46
2 Sept 36.8 °C 20 % 34 km/h 0.0 mm Extreme 52
3 Sept 36.3 °C 21 % 35 km/h 0.0 mm Extreme 55
4 Sept 36.8 °C 21 % 28 km/h 0.0 mm Very high 49
5 Sept 36.2 °C 27 % 29 km/h 0.0 mm Very high 44
6 Sept 35.2 °C 38 % 34 km/h 1.0 mm Very high 38
7 Sept 35.2 °C 34 % 35 km/h 0.0 mm High 32
8 Sept after 35.5 °C 30 % 29 km/h 0.0 mm High 33
9 Sept after 35.5 °C 27 % 32 km/h 0.0 mm Very high 38
10 Sept after 36.5 °C 27 % 32 km/h 0.0 mm Very high 39
11 Sept after 35.4 °C 32 % 28 km/h 0.0 mm High 34
12 Sept after 35.2 °C 37 % 21 km/h 0.0 mm High 31
13 Sept after 31.4 °C 53 % 26 km/h 0.1 mm High 27
14 Sept after 34.6 °C 41 % 25 km/h 0.2 mm High 28
15 Sept after 34.6 °C 41 % 22 km/h 0.2 mm High 30
16 Sept after 32.3 °C 53 % 25 km/h 5.5 mm Very low 3

Its twins: fires that started in the same weather

It started with an FWI of 37.1, a minimum humidity of 27% and more than two months without rain. Fires in the area that started in weather like this since 2016: 17.

FWI at the start 37.1
Minimum humidity 27 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Altamira fire, August 2024
7,079 ha 30 days FWI 34.9 Min. humidity 27 % 83 km away, in 2024

First rain (1 mm or more) after it ended: 1.1 mm on 24 Sept.

What happened to them

18 days
median duration
5,050 ha
median area
29 %
went past 10,000 ha
1.5 mm
rain at the end (median; 11 of 17 had it)

It was 2.8 times larger than the median of its twins and lasted 21 days, against 18 days.

Only 2 of its 17 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 6 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

5.5 mmfirst rain
16 Sept9 days after it ended
39km/h · max. gust

It was considered over on 7 Sept, and on 16 Sept 5.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 11 of 17, with a median of 1.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 11 Aug 2022
After · 14 Sept 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 25 August 2022 the air beside the fire reached 665 µg/m³ of PM2.5. That day averaged 332: 22 times the WHO daily guideline (15).

PM2.5 peak665 µg/m³
Days over the guideline24 days
PM10948 µg/m³
Optical depth2.31
16 Aug22 Aug28 Aug3 Sept9 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,088Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Brazil

Frequently asked questions

How long did the Altamira fire last?
GWIS (Copernicus) dates it between 18 August 2022 and 7 September 2022: 21 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 14,362 hectares (143.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Altamira (15,607 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 37.2 °C, humidity dropped to 18 % and gusts hit 39 km/h. The fire danger index (FWI) reached 57, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 17. Their median duration was 18 days and their median area 5,050 ha; 29 % went past 10,000 ha. Only 2 of its 17 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 6 of 17, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 193 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 15,458 → 14,362 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 193.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 1,088 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.