Burned area
satellite only3,250ha
Perimeter published by GWIS (Copernicus).
- Source
- GWIS (Copernicus)
- Date
- 7 Aug 2021 – 13 Aug 2021
+− cross-check
No official record is matched to this page to compare it with.
BR · Brazil · –
Altamira fire, 7 August 2021 Altamira, Itaituba
Out · last detection 13 Aug 2021, 04:58 UTC
The fire started on 7 August 2021 in Altamira, Brazil, and satellites saw it burning for 7 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,250 hectares from heat detections, spread across 2 municipalities.
It is the 849th largest in Pará since 2016 (of 957 with a page). Number 726 in Brazil in 2021, of 814.
Use this data
Compare with…
Use this data
Fire page data · version 2026-10-27matches the official recordwith caveatssatellite onlymodel
When copying, the sentence is
Tick the figures you want: they make up the lede and the CSV.
Duration by satellite
satellite only7days
7 Aug 2021 to 13 Aug 2021: first and last day with fire on the page.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- last detection: 13 Aug 2021, 04:58 UTC
+− cross-check
Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
Start
satellite only7 Aug 2021
First day with fire seen by the satellites or the perimeter.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- 7 Aug 2021
+− cross-check
No official record is matched to this page, so the alert time and the cause are not known here.
The worst day
satellite only1,110MW
Total radiative power on 9 August 2021; hotspots that day: 63.
- Source
- NASA FIRMS · VIIRS (FRP)
- Date
- 9 Aug 2021
+− cross-check
Fire radiative power (FRP) measures the energy the fire gives off when the satellite passes. Added up by day, it compares intensity, not area.
Danger at the start
model40.6FWI · very high
Fire Weather Index (Canadian system) computed by WorldFires for the day the fire started. Consecutive days without rain before: 49.
- Source
- WorldFires calculation (Canadian FWI system)
- Date
- 7 Aug 2021, local noon
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings
Weather during the fire
model37.0°C · 22% RH
High of 37.0 °C and minimum humidity of 22% on 11 August 2021; gusts of 40 km/h on 9 August 2021.
- Source
- weather model at the fire’s grid cell
- Date
- 7 Aug 2021 – 13 Aug 2021
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
This page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
-
· reconstructed weatherWeather and FWI computed from the ERA5 reanalysis
-
logStart date: 31 July 2021 → 7 August 2021.
-
logStart date: 7 August 2021 → 31 July 2021.
-
· reconstructed GHSLPopulation and built-up area computed
Area logged each night
Move the slider to see which area the page published each day.
Versioned permanent link
https://worldfires.org/en/fire/altamira-2021-08-13?v=2026-10-27A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
CSV for this fire altamira-2021-08-13.csv · daily, no individual hotspots
| fecha | focos_viirs | frp_mw | tmax_c | tmin_c | hr_min_pct | viento_max_kmh | racha_max_kmh | precip_mm | fwi | clase_fwi | dentro_del_incendio |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2021-08-07 | 3 | 15 | 36.3 | 23.5 | 22 | 11.5 | 35.3 | 0 | 40.6 | muy_alto | 1 |
| 2021-08-08 | 13 | 168 | 35.6 | 23.3 | 26 | 12.6 | 37.4 | 0 | 41.4 | muy_alto | 1 |
| 2021-08-09 | 63 | 1,110 | 36.6 | 23.5 | 24 | 14.4 | 40.3 | 0 | 43.6 | muy_alto | 1 |
| 2021-08-10 | 63 | 390 | 36.5 | 22.2 | 26 | 10.7 | 35.3 | 0 | 40.3 | muy_alto | 1 |
| 2021-08-11 | 39 | 254 | 37 | 22.7 | 22 | 9.6 | 29.9 | 0 | 39.6 | muy_alto | 1 |
| 2021-08-12 | 23 | 66 | 36.6 | 21.1 | 28 | 9.7 | 27 | 0 | 38.7 | muy_alto | 1 |
| 2021-08-13 | 14 | 13 | 34.8 | 23.2 | 37 | 9.1 | 24.5 | 0 | 32.6 | alto | 1 |
| 2021-08-14 | 0 | 0 | 32.3 | 23.5 | 43 | 10.3 | 27 | 0 | 29.1 | alto | 0 |
| 2021-08-15 | 0 | 0 | 34 | 22.9 | 40 | 7.4 | 30.6 | 0.3 | 27.2 | alto | 0 |
| 2021-08-16 | 0 | 0 | 34.4 | 22.4 | 33 | 9.5 | 24.8 | 0 | 29.4 | alto | 0 |
| 2021-08-17 | 0 | 0 | 36.2 | 22.8 | 25 | 12.6 | 35.3 | 0 | 37.4 | alto | 0 |
| 2021-08-18 | 0 | 0 | 37.5 | 22.4 | 20 | 13.5 | 36.4 | 0 | 43.1 | muy_alto | 0 |
| 2021-08-19 | 0 | 0 | 37.8 | 21.8 | 19 | 11.1 | 30.2 | 0 | 42 | muy_alto | 0 |
| 2021-08-20 | 0 | 0 | 37.5 | 22.9 | 18 | 10.7 | 33.8 | 0 | 42.3 | muy_alto | 0 |
| 2021-08-21 | 0 | 0 | 36.6 | 22 | 23 | 10.4 | 32.4 | 0 | 42.3 | muy_alto | 0 |
| 2021-08-22 | 0 | 0 | 36.6 | 24.1 | 26 | 9.3 | 28.8 | 0 | 40.4 | muy_alto | 0 |
| 2021-08-23 | 0 | 0 | 37.6 | 24.6 | 25 | 9.5 | 32.4 | 0 | 40.8 | muy_alto | 0 |
It is generated in your browser from this page’s data: one file per fire, aggregated by day and without individual hotspots.
Live widget for your story
It updates itself while the fire is still active and links to this page. Free, with the attribution shown at the bottom.
Sources for this page: GWIS (Copernicus), NASA FIRMS (VIIRS), ERA5 (ECMWF/Copernicus C3S) · Open-Meteo.com (CC BY 4.0), GHSL (JRC). Open-Meteo.com · How we build fire pages: methodology
- Burnt area
- 3,250ha
- GWIS perimeter (Copernicus)
- Duration
- 7days
- 7 Aug 2021 – 13 Aug 2021
- Municipalities hit
- 2
- municipalities
- Started on
- 7 Aug
- 2021
- Heat detections
- 218
- in a single hotspot: 0 MW
- Danger at start
- 41
- Very high · FWI index
- Average daily power
- 288MW
- detected power per day, on average
Where it burned
HOTSPOTS BY DAY
7 Aug13 Aug
13 Aug 2021
How it evolved, day by day
7 Aug
9 Aug
11 Aug
13 Aug
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
37°high
40km/h · peak gust
22%lowest humidity
It had gone 49 days without rain (1 mm or more) when it started.
This area had burned before
66% of the perimeter overlaps earlier fires recorded since 2016: 1,451 ha in 2017, 318 ha in 2018, 1,648 ha in 2019, 390 ha in 2020. Part of it burned more than once, so the yearly figures add up to more than the 2,147 ha that had burned before.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
2,764 ha0.0 %
-
Itaituba 123,314 inhabitants507 ha0.0 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020Built-up area< 0.1 ha
Residents< 20
Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 7 Aug | 36.3 °C | 22 % | 35 km/h | 0.0 mm | Very high 41 |
| 8 Aug | 35.6 °C | 26 % | 37 km/h | 0.0 mm | Very high 41 |
| 9 Aug | 36.6 °C | 24 % | 40 km/h | 0.0 mm | Very high 44 |
| 10 Aug | 36.5 °C | 26 % | 35 km/h | 0.0 mm | Very high 40 |
| 11 Aug | 37.0 °C | 22 % | 30 km/h | 0.0 mm | Very high 40 |
| 12 Aug | 36.6 °C | 28 % | 27 km/h | 0.0 mm | Very high 39 |
| 13 Aug | 34.8 °C | 37 % | 24 km/h | 0.0 mm | High 33 |
| 14 Aug after | 32.3 °C | 43 % | 27 km/h | 0.0 mm | High 29 |
| 15 Aug after | 34.0 °C | 40 % | 31 km/h | 0.3 mm | High 27 |
| 16 Aug after | 34.4 °C | 33 % | 25 km/h | 0.0 mm | High 29 |
| 17 Aug after | 36.2 °C | 25 % | 35 km/h | 0.0 mm | High 37 |
| 18 Aug after | 37.5 °C | 20 % | 36 km/h | 0.0 mm | Very high 43 |
| 19 Aug after | 37.8 °C | 19 % | 30 km/h | 0.0 mm | Very high 42 |
| 20 Aug after | 37.5 °C | 18 % | 34 km/h | 0.0 mm | Very high 42 |
| 21 Aug after | 36.6 °C | 23 % | 32 km/h | 0.0 mm | Very high 42 |
| 22 Aug after | 36.6 °C | 26 % | 29 km/h | 0.0 mm | Very high 40 |
| 23 Aug after | 37.6 °C | 25 % | 32 km/h | 0.0 mm | Very high 41 |
Its twins: fires that started in the same weather
It started with an FWI of 40.6, a minimum humidity of 22% and 49 days without rain. Fires in the area that started in weather like this since 2017: 1.
FWI at the start
40.6
Minimum humidity
22 %
Days without rain
49
this fire
chosen twins
rest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Altamira fire, 7 August 2021
3,250 ha
7 days
FWI 40.6
Min. humidity 22 %
Altamira fire, September 2020
5,248 ha
12 days
FWI 40.1
Min. humidity 27 %
108 km away, in 2020
First rain (1 mm or more) after it ended: 6.1 mm on 20 Sept.
What happened to them
Fires in the area that started in similar weather: 1. With fewer than 15 we give no figures: they would be more noise than signal.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
—first rain
—no rain in ten days
40km/h · max. gust
It was considered over on 13 Aug, and not even 1 mm fell in the following ten days: it went out without rain.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
- Same area: fires that have already ended, less than 250 km from this one, since 2017.
- Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
- Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
- Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
- They are sorted by similarity, and the outlines of the first five are drawn.
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
↔
Before · 31 Jul 2021
After · 20 Aug 2021
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 0Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV
Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Altamira fire last?
- GWIS (Copernicus) dates it between 7 August 2021 and 13 August 2021: 7 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,250 hectares (32.5 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Altamira (2,764 ha, 0.0 %); Itaituba (507 ha, 0.0 %).
- What was the weather like?
- During the fire the temperature reached 37.0 °C, humidity dropped to 22 % and gusts hit 40 km/h. The fire danger index (FWI) reached 44, class Very high.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Brazil (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 193 · Emergency number and official warnings
Satellite cross-check
History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Start date: 31 July 2021 → 7 August 2021.
- Start date: 7 August 2021 → 31 July 2021.
RSS Changes to this page With cross-checks and a citable version
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.