Skip to content
worldfires
SD · Sudan · –

Al Radoum fire, 5 November 2020 Al Radoum

Out · last detection 15 Nov 2020, 12:15 UTC

The fire started on 5 November 2020 in Al Radoum, Sudan, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,018 hectares from heat detections, spread across a single municipality.

It is the 211th largest in South Darfur since 2016 (of 217 with a page). Number 149 in Sudan in 2020, of 151.

Burnt area
2,018ha
GWIS perimeter (Copernicus)
Duration
11days
5 Nov 2020 – 15 Nov 2020
Municipalities hit
1
localities
Started on
5 Nov
2020
Heat detections
50
in a single hotspot: 31 MW
Danger at start
29
High · FWI index
Average daily power
47MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 5 Nov15 Nov
15 Nov 2020

How it evolved, day by day

5 Nov 2020 · 12 MW · 2 6 Nov 2020 · 69 MW · 17 7 Nov 2020 · 237 MW · 14 8 Nov 2020 · 12 MW · 3 9 Nov 2020 · 22 MW · 3 10 Nov 2020 · 11 MW · 2 11 Nov 2020 · 20 MW · 5 12 Nov 2020 · 11 MW · 3 15 Nov 2020 · 31 MW · 1
5 Nov 7 Nov 9 Nov 11 Nov 15 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
38km/h · peak gust
17%lowest humidity

It had gone 12 days without rain (1 mm or more) when it started.

This area had burned before

5% of the perimeter overlaps earlier fires recorded since 2016: 99 ha in 2019.

How big is it?

10 km
It burned the equivalent of 1.3% of the area of London (20 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Al Radoum where it started
    2,030 ha reached on 5 Nov
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
5 Nov 34.3 °C 23 % 35 km/h 0.0 mm High 29
6 Nov 33.7 °C 22 % 34 km/h 0.0 mm High 29
7 Nov 33.2 °C 19 % 35 km/h 0.0 mm High 32
8 Nov 33.6 °C 21 % 29 km/h 0.0 mm High 30
9 Nov 33.3 °C 20 % 36 km/h 0.0 mm High 34
10 Nov 33.4 °C 21 % 34 km/h 0.0 mm High 33
11 Nov 33.3 °C 20 % 37 km/h 0.0 mm High 36
12 Nov 33.1 °C 19 % 38 km/h 0.0 mm High 37
13 Nov 33.7 °C 20 % 37 km/h 0.0 mm High 38
14 Nov 33.5 °C 17 % 33 km/h 0.0 mm High 37
15 Nov 32.6 °C 17 % 36 km/h 0.0 mm Very high 39
16 Nov after 32.4 °C 20 % 38 km/h 0.0 mm Very high 40
17 Nov after 33.1 °C 21 % 36 km/h 0.0 mm Very high 40
18 Nov after 34.0 °C 20 % 31 km/h 0.0 mm High 38
19 Nov after 34.3 °C 22 % 32 km/h 0.0 mm Very high 39
20 Nov after 34.6 °C 20 % 37 km/h 0.0 mm Very high 42
21 Nov after 33.6 °C 17 % 43 km/h 0.0 mm Very high 47
22 Nov after 33.3 °C 17 % 40 km/h 0.0 mm Very high 46
23 Nov after 33.6 °C 16 % 35 km/h 0.0 mm Very high 42
24 Nov after 34.6 °C 18 % 30 km/h 0.0 mm Very high 40
25 Nov after 35.0 °C 19 % 28 km/h 0.0 mm Very high 40

Its twins: fires that started in the same weather

It started with an FWI of 28.8, a minimum humidity of 23% and 12 days without rain. Fires in the area that started in weather like this since 2016: 23.

FWI at the start 28.8
Minimum humidity 23 %
Days without rain 12
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Ouandja fire, November 2017
5,783 ha 8 days FWI 29.1 Min. humidity 23 % 118 km away, in 2017

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

8 days
median duration
6,402 ha
median area
26 %
went past 10,000 ha
1.5 mm
rain at the end (median; 3 of 23 had it)

It stayed below its twins: 2,018 ha against a median of 6,402 ha. It lasted 11 days, against 8 days.

In 20 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.5 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
38km/h · max. gust

It was considered over on 15 Nov, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 3 of 23, with a median of 1.5 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 29 Oct 2020
After · 22 Nov 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 50Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Sudan

Frequently asked questions

How long did the Al Radoum fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 5 November 2020 to 15 November 2020 (11 days). The perimeter dates it from 5 November 2020 to 12 November 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,018 hectares (20.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Al Radoum (2,030 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 34.3 °C, humidity dropped to 17 % and gusts hit 38 km/h. The fire danger index (FWI) reached 39, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Sudan (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 23. Their median duration was 8 days and their median area 6,402 ha; 26 % went past 10,000 ha. In 20 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.5 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 12 November 2020 → 15 November 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 5 November 2020 to 12 November 2020. 50 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.