Burned area
satellite only1,884ha
Union of 2 GWIS (Copernicus) perimeters: overlapping areas count once.
- Source
- GWIS (Copernicus)
- Date
- 17 Feb 2019 – 12 Mar 2019
+− cross-check
No official record is matched to this page to compare it with.
LR · Liberia · –
Zorzor fire, 17 February 2019 Zorzor
Out · last detection 12 Mar 2019, 14:09 UTC
The fire started on 17 February 2019 in Zorzor, Liberia, and satellites saw it burning for 24 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,884 hectares from heat detections, spread across a single municipality.
We are reviewing this page: some of its data look inconsistent (the place, the dates or the area), so treat them with caution.
Use this data
Compare with…
Use this data
Fire page data · version 2026-11-05matches the official recordwith caveatssatellite onlymodel
When copying, the sentence is
Tick the figures you want: they make up the lede and the CSV.
Duration by satellite
satellite only24days
17 Feb 2019 to 12 Mar 2019: first and last day with fire on the page.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- last detection: 12 Mar 2019, 14:09 UTC
+− cross-check
Satellites pass a few times a day and cloud or smoke can hide the fire: a lack of detections is not an official extinction. Each country’s emergency service declares a fire contained or out.
Start
satellite only17 Feb 2019
First day with fire seen by the satellites or the perimeter.
- Source
- GWIS (Copernicus) · NASA FIRMS · VIIRS
- Date
- 17 Feb 2019
+− cross-check
No official record is matched to this page, so the alert time and the cause are not known here.
Hotspots
satellite only102
VIIRS detections at 375 m. Most intense hotspot: 95 MW.
- Source
- NASA FIRMS · VIIRS (Suomi NPP)
- Date
- 17 Feb 2019 – 12 Mar 2019
+− cross-check
There is no official record to compare with. Each hotspot is a pixel detected in one satellite pass, not a separate fire.
The worst day
satellite only605MW
Total radiative power on 8 March 2019; hotspots that day: 18.
- Source
- NASA FIRMS · VIIRS (FRP)
- Date
- 8 Mar 2019
+− cross-check
Fire radiative power (FRP) measures the energy the fire gives off when the satellite passes. Added up by day, it compares intensity, not area.
Danger at the start
model33.5FWI · high
Fire Weather Index (Canadian system) computed by WorldFires for the day the fire started. Consecutive days without rain before: 6.
- Source
- WorldFires calculation (Canadian FWI system)
- Date
- 17 Feb 2019, local noon
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings
Weather during the fire
model39.2°C · 16% RH
High of 39.2 °C and minimum humidity of 16% on 6 March 2019; gusts of 40 km/h on 7 March 2019.
- Source
- weather model at the fire’s grid cell
- Date
- 17 Feb 2019 – 12 Mar 2019
- Model
- ERA5 0,25° (ECMWF · Copernicus C3S) · Open-Meteo.com
+− cross-check
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
Living inside
model≈ 300people
Estimated residents inside the perimeter and 1.5 ha of built-up area (100 m grid, epoch 2020).
- Source
- GHSL R2023A · JRC
- Date
- calculated on 24 October 2026
+− cross-check
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
This page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
-
logArea: 2,440 → 1,884 ha.
-
· reconstructed weatherWeather and FWI computed from the ERA5 reanalysis
-
logLast day with fire: 8 March 2019 → 12 March 2019.
-
logStart date: 21 February 2019 → 17 February 2019.
-
· reconstructed GHSLPopulation and built-up area computed
Area logged each night
Move the slider to see which area the page published each day.
Versioned permanent link
https://worldfires.org/en/fire/zorzor-2019-02-2?v=2026-11-05A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
CSV for this fire zorzor-2019-02-2.csv · daily, no individual hotspots
| fecha | focos_viirs | frp_mw | tmax_c | tmin_c | hr_min_pct | viento_max_kmh | racha_max_kmh | precip_mm | fwi | clase_fwi | dentro_del_incendio |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2019-02-17 | 5 | 78 | 35.2 | 22.3 | 36 | 8.8 | 29.2 | 0.2 | 33.5 | alto | 1 |
| 2019-02-18 | 2 | 25 | 34 | 23.5 | 43 | 8.4 | 25.6 | 8.9 | 5 | muy_bajo | 1 |
| 2019-02-19 | 0 | 0 | 33.9 | 22.6 | 40 | 14 | 32 | 1 | 17 | moderado | 1 |
| 2019-02-20 | 0 | 0 | 29.5 | 22.5 | 49 | 8.9 | 23.8 | 2.1 | 6.9 | bajo | 1 |
| 2019-02-21 | 4 | 69 | 34.9 | 20.7 | 35 | 7.9 | 21.2 | 0 | 19.5 | moderado | 1 |
| 2019-02-22 | 4 | 30 | 37.1 | 21.2 | 21 | 10.1 | 20.2 | 0 | 32.2 | alto | 1 |
| 2019-02-23 | 15 | 226 | 37.5 | 21.2 | 18 | 8.6 | 19.1 | 0 | 34.5 | alto | 1 |
| 2019-02-24 | 2 | 7 | 35.4 | 19.6 | 28 | 11.2 | 26.3 | 0 | 35.1 | alto | 1 |
| 2019-02-25 | 5 | 225 | 36.3 | 22.4 | 26 | 10 | 28.4 | 0 | 34.7 | alto | 1 |
| 2019-02-26 | 13 | 415 | 36.2 | 22.5 | 23 | 9.3 | 27.7 | 0 | 34.7 | alto | 1 |
| 2019-02-27 | 0 | 0 | 35.2 | 22.1 | 28 | 9.7 | 23.8 | 0 | 34.7 | alto | 1 |
| 2019-02-28 | 2 | 6 | 34 | 22.7 | 23 | 10.1 | 33.1 | 0 | 35.6 | alto | 1 |
| 2019-03-01 | 8 | 44 | 37 | 19.2 | 11 | 10.1 | 28.1 | 0 | 43.1 | muy_alto | 1 |
| 2019-03-02 | 4 | 34 | 36.7 | 19.8 | 14 | 8.3 | 20.2 | 0 | 41.9 | muy_alto | 1 |
| 2019-03-03 | 1 | 43 | 36.7 | 20.4 | 14 | 7.2 | 19.8 | 0 | 41.3 | muy_alto | 1 |
| 2019-03-04 | 1 | 4 | 37.1 | 20.9 | 18 | 11.3 | 26.3 | 0 | 45.9 | muy_alto | 1 |
| 2019-03-05 | 2 | 9 | 37.8 | 21.5 | 18 | 10 | 26.3 | 0 | 45 | muy_alto | 1 |
| 2019-03-06 | 3 | 25 | 39.2 | 21.6 | 16 | 12.5 | 25.2 | 0 | 48.3 | muy_alto | 1 |
| 2019-03-07 | 6 | 139 | 39 | 22.6 | 23 | 16.7 | 39.6 | 0 | 50.5 | extremo | 1 |
| 2019-03-08 | 18 | 605 | 37.7 | 23.5 | 22 | 12.6 | 29.5 | 0 | 45.8 | muy_alto | 1 |
| 2019-03-09 | 1 | 7 | 37.3 | 24.4 | 17 | 14.4 | 33.5 | 0 | 48.1 | muy_alto | 1 |
| 2019-03-10 | 0 | 0 | 34.4 | 23.9 | 38 | 10.8 | 29.9 | 0.2 | 33.4 | alto | 1 |
| 2019-03-11 | 4 | 100 | 35.9 | 24.7 | 34 | 8.4 | 32 | 0.3 | 31.7 | alto | 1 |
| 2019-03-12 | 2 | 13 | 35.9 | 25.2 | 38 | 12.6 | 30.2 | 2.9 | 15.5 | moderado | 1 |
| 2019-03-13 | 0 | 0 | 38 | 23.4 | 25 | 12 | 24.1 | 0 | 34 | alto | 0 |
| 2019-03-14 | 0 | 0 | 36.6 | 25.3 | 27 | 10.6 | 25.6 | 0 | 33.3 | alto | 0 |
| 2019-03-15 | 0 | 0 | 37.5 | 25 | 27 | 11.7 | 25.9 | 0 | 34.6 | alto | 0 |
| 2019-03-16 | 0 | 0 | 36.8 | 25 | 32 | 14 | 36 | 0.1 | 37 | alto | 0 |
| 2019-03-17 | 0 | 0 | 36.3 | 24.5 | 40 | 15.2 | 35.6 | 6.1 | 10.4 | bajo | 0 |
It is generated in your browser from this page’s data: one file per fire, aggregated by day and without individual hotspots.
Live widget for your story
It updates itself while the fire is still active and links to this page. Free, with the attribution shown at the bottom.
Sources for this page: GWIS (Copernicus), NASA FIRMS (VIIRS), ERA5 (ECMWF/Copernicus C3S) · Open-Meteo.com (CC BY 4.0), GHSL (JRC). Open-Meteo.com · How we build fire pages: methodology
- Burnt area
- 1,884ha
- GWIS perimeter (Copernicus)
- Duration
- 24days
- 17 Feb 2019 – 12 Mar 2019
- Municipalities hit
- 1
- districts
- Started on
- 17 Feb
- 2019
- Heat detections
- 102
- in a single hotspot: 95 MW
- Danger at start
- 34
- High · FWI index
- Average daily power
- 105MW
- detected power per day, on average
Where it burned
HOTSPOTS BY DAY
17 Feb12 Mar
12 Mar 2019
How it evolved, day by day
17 Feb
23 Feb
28 Feb
4 Mar
8 Mar
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
39°high
40km/h · peak gust
11%lowest humidity
It had gone 6 days without rain (1 mm or more) when it started. Rain came after the fire: 6.1 mm on 17 Mar.
This area had burned before
7% of the perimeter overlaps earlier fires recorded since 2016: 127 ha in 2016.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Zorzor where it started2,456 ha reached on 17 Feb0.8 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020Built-up area1.5 ha
Residents≈ 300
Inside the perimeter there were about 1.5 hectares of built-up land and about 300 residents (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 17 Feb | 35.2 °C | 36 % | 29 km/h | 0.2 mm | High 34 |
| 18 Feb | 34.0 °C | 43 % | 26 km/h | 8.9 mm | Very low 5 |
| 19 Feb | 33.9 °C | 40 % | 32 km/h | 1.0 mm | Moderate 17 |
| 20 Feb | 29.5 °C | 49 % | 24 km/h | 2.1 mm | Low 7 |
| 21 Feb | 34.9 °C | 35 % | 21 km/h | 0.0 mm | Moderate 20 |
| 22 Feb | 37.1 °C | 21 % | 20 km/h | 0.0 mm | High 32 |
| 23 Feb | 37.5 °C | 18 % | 19 km/h | 0.0 mm | High 34 |
| 24 Feb | 35.4 °C | 28 % | 26 km/h | 0.0 mm | High 35 |
| 25 Feb | 36.3 °C | 26 % | 28 km/h | 0.0 mm | High 35 |
| 26 Feb | 36.2 °C | 23 % | 28 km/h | 0.0 mm | High 35 |
| 27 Feb | 35.2 °C | 28 % | 24 km/h | 0.0 mm | High 35 |
| 28 Feb | 34.0 °C | 23 % | 33 km/h | 0.0 mm | High 36 |
| 1 Mar | 37.0 °C | 11 % | 28 km/h | 0.0 mm | Very high 43 |
| 2 Mar | 36.7 °C | 14 % | 20 km/h | 0.0 mm | Very high 42 |
| 3 Mar | 36.7 °C | 14 % | 20 km/h | 0.0 mm | Very high 41 |
| 4 Mar | 37.1 °C | 18 % | 26 km/h | 0.0 mm | Very high 46 |
| 5 Mar | 37.8 °C | 18 % | 26 km/h | 0.0 mm | Very high 45 |
| 6 Mar | 39.2 °C | 16 % | 25 km/h | 0.0 mm | Very high 48 |
| 7 Mar | 39.0 °C | 23 % | 40 km/h | 0.0 mm | Extreme 50 |
| 8 Mar | 37.7 °C | 22 % | 30 km/h | 0.0 mm | Very high 46 |
| 9 Mar | 37.3 °C | 17 % | 34 km/h | 0.0 mm | Very high 48 |
| 10 Mar | 34.4 °C | 38 % | 30 km/h | 0.2 mm | High 33 |
| 11 Mar | 35.9 °C | 34 % | 32 km/h | 0.3 mm | High 32 |
| 12 Mar | 35.9 °C | 38 % | 30 km/h | 2.9 mm | Moderate 16 |
| 13 Mar after | 38.0 °C | 25 % | 24 km/h | 0.0 mm | High 34 |
| 14 Mar after | 36.6 °C | 27 % | 26 km/h | 0.0 mm | High 33 |
| 15 Mar after | 37.5 °C | 27 % | 26 km/h | 0.0 mm | High 35 |
| 16 Mar after | 36.8 °C | 32 % | 36 km/h | 0.1 mm | High 37 |
| 17 Mar after | 36.3 °C | 40 % | 36 km/h | 6.1 mm | Low 10 |
Its twins: fires that started in the same weather
It started with an FWI of 33.5, a minimum humidity of 36% and 6 days without rain. Fires in the area that started in weather like this since 2016: 41.
FWI at the start
33.5
Minimum humidity
36 %
Days without rain
6
this fire
chosen twins
rest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Zorzor fire, 17 February 2019
1,884 ha
24 days
FWI 33.5
Min. humidity 36 %
Watanka fire, March 2020
2,141 ha
11 days
FWI 34.5
Min. humidity 38 %
69 km away, in 2020
First rain (1 mm or more) after it ended: 2.2 mm on 18 Mar.
Sengbe fire, April 2024
1,127 ha
9 days
FWI 32.8
Min. humidity 36 %
248 km away, in 2024
First rain (1 mm or more) after it ended: 15.9 mm on 8 May.
Bagbo fire, March 2025
1,309 ha
3 days
FWI 32.5
Min. humidity 36 %
246 km away, in 2025
First rain (1 mm or more) after it ended: 7.4 mm on 23 Mar.
Lower Bambara fire, March 2020
1,565 ha
8 days
FWI 32.2
Min. humidity 35 %
154 km away, in 2020
First rain (1 mm or more) after it ended: 3.2 mm on 23 Mar.
Quardu Boundi fire, February 2020
6,045 ha
18 days
FWI 27.0
Min. humidity 36 %
18 km away, in 2020
First rain (1 mm or more) after it ended: 1.7 mm on 17 Mar.
What happened to them
- 10 days
- median duration
- 1,723 ha
- median area
- 100 %
- went past 1,000 ha
- 4.4 mm
- rain at the end (median; 40 of 41 had it)
It burned an area similar to its twins (1,884 ha against a median of 1,723 ha) and lasted 24 days, against 10 days.
In 1 of 41, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.4 mm.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
6.1 mmfirst rain
17 Mar5 days after it ended
40km/h · max. gust
It was considered over on 12 Mar, and on 17 Mar 6.1 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 40 of 41, with a median of 4.4 mm.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
- Same area: fires that have already ended, less than 250 km from this one, since 2016.
- Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
- Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
- Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
- They are sorted by similarity, and the outlines of the first five are drawn.
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
↔
Before · 10 Feb 2019
After · 19 Mar 2019
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 102Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV
Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
Frequently asked questions
- How long did the Zorzor fire last?
- According to the heat detections seen by satellite inside the perimeter, it burned from 17 February 2019 to 12 March 2019 (24 days). The perimeter dates it from 21 February 2019 to 8 March 2019.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,884 hectares (18.8 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Zorzor (2,456 ha, 0.8 %).
- What was the weather like?
- During the fire the temperature reached 39.2 °C, humidity dropped to 11 % and gusts hit 40 km/h. The fire danger index (FWI) reached 50, class Extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Liberia (geoBoundaries). It is not an official report.
- How did the fires that started in similar weather in this area end?
- Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 41. Their median duration was 10 days and their median area 1,723 ha; 100 % went past 1,000 ha. In 1 of 41, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 4.4 mm.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page · 3 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
- Area: 2,440 → 1,884 ha.
- Last day with fire: 8 March 2019 → 12 March 2019.
- Start date: 21 February 2019 → 17 February 2019.
RSS Changes to this page With cross-checks and a citable version
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
- Dates adjusted with the VIIRS detections inside the perimeter, which said 21 February 2019 to 8 March 2019. 102 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.