Skip to content
worldfires
RU · Russia · –

Zeysky District fire, 26 June 2024 Zeysky District

Out · last detection 13 Jul 2024, 05:16 UTC

The fire started on 26 June 2024 in Zeysky District, Russia, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 6,902 hectares from heat detections, spread across a single municipality.

It is the 211th largest in Amur Oblast since 2016 (of 491 with a page). Number 244 in Russia in 2024, of 557.

Burnt area
6,902ha
GWIS perimeter (Copernicus)
Duration
18days
26 Jun 2024 – 13 Jul 2024
Municipalities hit
1
districts
Started on
26 Jun
2024
Heat detections
928
in a single hotspot: 140 MW
Danger at start
5
Very low · FWI index
Average daily power
393MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 26 Jun13 Jul
13 Jul 2024

How it evolved, day by day

26 Jun 2024 · 354 MW · 25 27 Jun 2024 · 25 MW · 17 28 Jun 2024 · 98 MW · 17 29 Jun 2024 · 558 MW · 69 30 Jun 2024 · 926 MW · 133 1 Jul 2024 · 889 MW · 117 2 Jul 2024 · 1,299 MW · 115 3 Jul 2024 · 180 MW · 41 4 Jul 2024 · 250 MW · 59 5 Jul 2024 · 123 MW · 12 8 Jul 2024 · 368 MW · 44 9 Jul 2024 · 188 MW · 42 10 Jul 2024 · 133 MW · 49 11 Jul 2024 · 231 MW · 29 12 Jul 2024 · 425 MW · 122 13 Jul 2024 · 249 MW · 37
26 Jun 2 Jul 10 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
37km/h · peak gust
24%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 8.0 mm on 14 Jul.

This area had burned before

35% of the perimeter overlaps earlier fires recorded since 2016: 2,395 ha in 2016.

How big is it?

10 km
It burned the equivalent of 4.4% of the area of London (69 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Zeysky District where it started
    6,837 ha reached on 26 Jun
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
26 Jun 30.7 °C 27 % 18 km/h 0.0 mm Very low 5
27 Jun 29.0 °C 35 % 28 km/h 1.1 mm Moderate 14
28 Jun 26.6 °C 29 % 33 km/h 0.2 mm Moderate 19
29 Jun 23.3 °C 26 % 35 km/h 0.9 mm High 25
30 Jun 26.3 °C 24 % 29 km/h 0.0 mm High 22
1 Jul 30.7 °C 35 % 29 km/h 0.0 mm High 24
2 Jul 33.3 °C 32 % 29 km/h 0.0 mm High 23
3 Jul 32.2 °C 41 % 28 km/h 0.0 mm High 22
4 Jul 31.8 °C 40 % 33 km/h 0.0 mm Moderate 21
5 Jul 30.6 °C 46 % 24 km/h 1.7 mm Moderate 18
6 Jul 28.3 °C 29 % 37 km/h 7.2 mm Very low 5
7 Jul 26.9 °C 36 % 32 km/h 0.0 mm Moderate 13
8 Jul 27.4 °C 26 % 30 km/h 0.0 mm Moderate 18
9 Jul 27.6 °C 27 % 27 km/h 0.0 mm Moderate 21
10 Jul 26.6 °C 38 % 23 km/h 0.0 mm Moderate 18
11 Jul 26.3 °C 43 % 26 km/h 0.0 mm Moderate 19
12 Jul 27.1 °C 38 % 17 km/h 0.1 mm Moderate 20
13 Jul 27.3 °C 31 % 31 km/h 0.1 mm High 23
14 Jul after 23.2 °C 59 % 40 km/h 8.0 mm Low 10

Its twins: fires that started in the same weather

It started with an FWI of 4.9, a minimum humidity of 27% and rain the day before. Fires in the area that started in weather like this since 2016: 23.

FWI at the start 4.9
Minimum humidity 27 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Zeysky District fire, April 2018
4,625 ha 11 days FWI 1.7 Min. humidity 27 % 129 km away, in 2018

First rain (1 mm or more) after it ended: 11.1 mm on 10 May.

What happened to them

9 days
median duration
6,127 ha
median area
30 %
went past 10,000 ha
6.4 mm
rain at the end (median; 22 of 23 had it)

It burned an area similar to its twins (6,902 ha against a median of 6,127 ha) and lasted 18 days, against 9 days.

In 1 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.4 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

8.0 mmfirst rain
14 Julthe day after it ended
37km/h · max. gust

It was considered over on 13 Jul, and on 14 Jul 8.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 22 of 23, with a median of 6.4 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 19 Jun 2024
After · 20 Jul 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 3 July 2024 the air beside the fire reached 626 µg/m³ of PM2.5. That day averaged 382: 25 times the WHO daily guideline (15).

PM2.5 peak626 µg/m³
Days over the guideline20 days
PM10896 µg/m³
Optical depth5.28
24 Jun29 Jun4 Jul9 Jul14 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 928Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Zeysky District fire last?
GWIS (Copernicus) dates it between 26 June 2024 and 13 July 2024: 18 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 6,902 hectares (69.0 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Zeysky District (6,837 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 33.3 °C, humidity dropped to 24 % and gusts hit 37 km/h. The fire danger index (FWI) reached 25, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 23. Their median duration was 9 days and their median area 6,127 ha; 30 % went past 10,000 ha. In 1 of 23, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 6.4 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 928 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.