Skip to content
worldfires
RU · Russia · –

Zeysky District fire, 3 June 2024 Zeysky District

Out · last detection 16 Jun 2024, 04:58 UTC

The fire started on 3 June 2024 in Zeysky District, Russia, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,425 hectares from heat detections, spread across a single municipality.

It is the 346th largest in Amur Oblast since 2016 (of 491 with a page). Number 394 in Russia in 2024, of 557.

Burnt area
4,425ha
GWIS perimeter (Copernicus)
Duration
14days
3 Jun 2024 – 16 Jun 2024
Municipalities hit
1
districts
Started on
3 Jun
2024
Heat detections
395
in a single hotspot: 154 MW
Danger at start
14
Moderate · FWI index
Average daily power
284MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Jun16 Jun
16 Jun 2024

How it evolved, day by day

3 Jun 2024 · 309 MW · 62 4 Jun 2024 · 2,422 MW · 52 5 Jun 2024 · 144 MW · 22 6 Jun 2024 · 113 MW · 11 7 Jun 2024 · 8 MW · 7 8 Jun 2024 · 161 MW · 35 9 Jun 2024 · 65 MW · 12 10 Jun 2024 · 90 MW · 14 11 Jun 2024 · 166 MW · 49 12 Jun 2024 · 66 MW · 17 13 Jun 2024 · 266 MW · 58 14 Jun 2024 · 32 MW · 23 15 Jun 2024 · 105 MW · 30 16 Jun 2024 · 35 MW · 3
4 Jun 9 Jun 12 Jun 15 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

22°high
55km/h · peak gust
23%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 2.5 mm on 18 Jun.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.8% of the area of London (44 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Zeysky District where it started
    4,389 ha reached on 3 Jun
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Jun 17.1 °C 23 % 28 km/h 0.0 mm Moderate 14
4 Jun 19.5 °C 27 % 40 km/h 0.0 mm Moderate 18
5 Jun 15.7 °C 52 % 31 km/h 0.0 mm Moderate 13
6 Jun 17.1 °C 57 % 34 km/h 0.0 mm Moderate 12
7 Jun 13.2 °C 39 % 51 km/h 0.6 mm Moderate 14
8 Jun 18.1 °C 35 % 36 km/h 0.0 mm Moderate 14
9 Jun 20.0 °C 33 % 18 km/h 0.0 mm Moderate 13
10 Jun 15.2 °C 57 % 38 km/h 3.2 mm Very low 3
11 Jun 19.1 °C 42 % 29 km/h 0.7 mm Very low 5
12 Jun 21.4 °C 41 % 18 km/h 0.2 mm Low 8
13 Jun 19.7 °C 41 % 20 km/h 0.1 mm Low 11
14 Jun 21.3 °C 37 % 18 km/h 2.5 mm Very low 3
15 Jun 21.5 °C 41 % 21 km/h 0.3 mm Low 7
16 Jun 19.2 °C 45 % 55 km/h 3.9 mm Very low 4
17 Jun after 17.2 °C 48 % 45 km/h 0.7 mm Low 6
18 Jun after 18.7 °C 44 % 32 km/h 2.5 mm Very low 3

Its twins: fires that started in the same weather

It started with an FWI of 14.3, a minimum humidity of 23% and rain the day before. Fires in the area that started in weather like this since 2016: 15.

FWI at the start 14.3
Minimum humidity 23 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Zeysky District fire, June 2024
3,493 ha 14 days FWI 15.3 Min. humidity 23 % 83 km away, in 2024

First rain (1 mm or more) after it ended: 7.0 mm on 14 Jul.

What happened to them

7 days
median duration
4,779 ha
median area
27 %
went past 10,000 ha
5.2 mm
rain at the end (median; 15 of 15 had it)

It burned an area similar to its twins (4,425 ha against a median of 4,779 ha) and lasted 14 days, against 7 days.

All of them had rain in the ten days after the end: the first rainy day brought a median of 5.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.5 mmfirst rain
18 Jun2 days after it ended
55km/h · max. gust

It was considered over on 16 Jun, and on 18 Jun 2.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 15 of 15, with a median of 5.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 27 May 2024
After · 23 Jun 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 4 June 2024 the air beside the fire reached 218 µg/m³ of PM2.5. That day averaged 86: 5.7 times the WHO daily guideline (15).

PM2.5 peak218 µg/m³
Days over the guideline10 days
PM10312 µg/m³
Optical depth3.01
1 Jun5 Jun9 Jun13 Jun17 Jun
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 395Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Zeysky District fire last?
GWIS (Copernicus) dates it between 3 June 2024 and 16 June 2024: 14 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,425 hectares (44.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Zeysky District (4,389 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 21.5 °C, humidity dropped to 23 % and gusts hit 55 km/h. The fire danger index (FWI) reached 18, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 15. Their median duration was 7 days and their median area 4,779 ha; 27 % went past 10,000 ha. All of them had rain in the ten days after the end: the first rainy day brought a median of 5.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 395 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.