Skip to content
worldfires
RU · Russia · –

Zeysky District fire, 7 July 2023 Zeysky District, Tyndinsky District

Out · last detection

The fire started on in Zeysky District, Russia, and satellites saw it burning for 36 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 34,454 hectares from heat detections, spread across 2 municipalities.

It is number 34 by size of the 491 fires with a page that started in Amur Oblast since 2016. Number 14 in Russia in 2023, of 450.

Burnt area
34,454ha
GWIS perimeter (Copernicus)
Duration
36days
7 Jul 2023 – 11 Aug 2023
Municipalities hit
2
districts
Started on
7 Jul
2023
Heat detections
6,089
in a single hotspot: 211 MW
Danger at start
14
Moderate · FWI index
Average daily power
1.5GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Jul11 Aug
11 Aug 2023

How it evolved, day by day

7 Jul 2023 · 15 MW · 4 8 Jul 2023 · 121 MW · 31 9 Jul 2023 · 3,073 MW · 352 10 Jul 2023 · 5,533 MW · 529 11 Jul 2023 · 4,153 MW · 399 12 Jul 2023 · 5,018 MW · 586 13 Jul 2023 · 4,778 MW · 380 14 Jul 2023 · 772 MW · 81 15 Jul 2023 · 780 MW · 209 16 Jul 2023 · 1,743 MW · 338 17 Jul 2023 · 2,512 MW · 402 18 Jul 2023 · 4,037 MW · 468 19 Jul 2023 · 2,710 MW · 233 20 Jul 2023 · 8 MW · 11 22 Jul 2023 · 15 MW · 5 23 Jul 2023 · 188 MW · 57 24 Jul 2023 · 546 MW · 62 25 Jul 2023 · 138 MW · 96 26 Jul 2023 · 1,312 MW · 253 27 Jul 2023 · 1,267 MW · 256 28 Jul 2023 · 368 MW · 121 30 Jul 2023 · 96 MW · 28 3 Aug 2023 · 27 MW · 11 4 Aug 2023 · 460 MW · 95 5 Aug 2023 · 668 MW · 185 6 Aug 2023 · 2,048 MW · 360 7 Aug 2023 · 793 MW · 146 8 Aug 2023 · 600 MW · 111 9 Aug 2023 · 601 MW · 142 10 Aug 2023 · 538 MW · 114 11 Aug 2023 · 203 MW · 24
10 Jul 22 Jul 30 Jul 9 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
42km/h · peak gust
21%lowest humidity

It had gone 7 days without rain (1 mm or more) when it started. Rain came after the fire: 1.1 mm on 12 Aug.

This area had burned before

3% of the perimeter overlaps earlier fires recorded since 2016: 37 ha in 2017, 951 ha in 2019, 52 ha in 2020.

How big is it?

10 km
It burned the equivalent of 22% of the area of London (345 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Zeysky District where it started
    37,753 ha reached on 7 Jul
    0.4 %
  2. 310 ha reached on 15 Jul
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area0.10 ha
Residents< 20

Inside the perimeter there were about 0.10 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Jul 30.2 °C 38 % 17 km/h 0.0 mm Moderate 14
8 Jul 27.7 °C 30 % 32 km/h 0.6 mm Moderate 16
9 Jul 25.0 °C 21 % 42 km/h 0.0 mm High 26
10 Jul 25.6 °C 23 % 33 km/h 0.0 mm High 24
11 Jul 28.1 °C 28 % 20 km/h 0.0 mm Moderate 18
12 Jul 28.7 °C 27 % 31 km/h 0.0 mm High 24
13 Jul 27.3 °C 32 % 32 km/h 0.0 mm High 26
14 Jul 26.7 °C 39 % 37 km/h 0.0 mm High 24
15 Jul 26.2 °C 42 % 30 km/h 0.0 mm Moderate 17
16 Jul 26.7 °C 36 % 19 km/h 0.0 mm Moderate 15
17 Jul 28.5 °C 36 % 17 km/h 0.0 mm Moderate 18
18 Jul 30.1 °C 30 % 32 km/h 0.0 mm High 26
19 Jul 27.5 °C 35 % 38 km/h 0.0 mm High 28
20 Jul 18.1 °C 75 % 24 km/h 27.1 mm Very low 0
21 Jul 20.8 °C 45 % 42 km/h 0.0 mm Very low 1
22 Jul 24.2 °C 41 % 23 km/h 0.0 mm Very low 5
23 Jul 27.7 °C 32 % 23 km/h 0.0 mm Moderate 12
24 Jul 27.5 °C 33 % 22 km/h 0.0 mm Moderate 15
25 Jul 24.7 °C 45 % 27 km/h 0.1 mm Moderate 15
26 Jul 26.1 °C 41 % 17 km/h 0.2 mm Moderate 13
27 Jul 27.4 °C 41 % 23 km/h 0.3 mm Moderate 15
28 Jul 24.6 °C 52 % 34 km/h 1.8 mm Moderate 20
29 Jul 20.6 °C 76 % 21 km/h 12.5 mm Very low 0
30 Jul 27.3 °C 36 % 26 km/h 0.0 mm Very low 1
31 Jul 19.9 °C 73 % 41 km/h 12.6 mm Very low 0
1 Aug 23.3 °C 44 % 31 km/h 0.2 mm Very low 1
2 Aug 22.4 °C 27 % 38 km/h 0.0 mm Low 6
3 Aug 21.8 °C 30 % 29 km/h 0.0 mm Low 10
4 Aug 23.5 °C 29 % 20 km/h 0.0 mm Low 11
5 Aug 24.5 °C 30 % 18 km/h 0.0 mm Low 11
6 Aug 26.4 °C 25 % 19 km/h 0.0 mm Moderate 15
7 Aug 25.4 °C 29 % 18 km/h 0.0 mm Moderate 15
8 Aug 26.7 °C 28 % 17 km/h 0.0 mm Moderate 15
9 Aug 24.4 °C 38 % 26 km/h 0.0 mm Moderate 16
10 Aug 24.2 °C 38 % 23 km/h 0.0 mm Moderate 14
11 Aug 23.1 °C 52 % 32 km/h 0.1 mm Moderate 16
12 Aug after 21.9 °C 59 % 25 km/h 1.1 mm Low 10

Its twins: fires that started in the same weather

It started with an FWI of 14.2, a minimum humidity of 38% and 7 days without rain. Fires in the area that started in weather like this since 2016: 21.

FWI at the start 14.2
Minimum humidity 38 %
Days without rain 7
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Tyndinsky District fire, June 2020
3,469 ha 11 days FWI 12.8 Min. humidity 36 % 52 km away, in 2020

First rain (1 mm or more) after it ended: 6.1 mm on 10 Jul.

What happened to them

12 days
median duration
7,659 ha
median area
33 %
went past 10,000 ha
6.1 mm
rain at the end (median; 21 of 21 had it)

It was 4.5 times larger than the median of its twins and lasted 36 days, against 12 days.

Only 2 of its 21 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 6.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.1 mmfirst rain
12 Augthe day after it ended
42km/h · max. gust

It was considered over on 11 Aug, and on 12 Aug 1.1 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 21 of 21, with a median of 6.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 30 Jun 2023
After · 18 Aug 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 20 July 2023 the air beside the fire reached 501 µg/m³ of PM2.5. That day averaged 230: 15 times the WHO daily guideline (15).

PM2.5 peak501 µg/m³
Days over the guideline35 days
PM10715 µg/m³
Optical depth3.44
5 Jul14 Jul23 Jul1 Aug10 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 6,089Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Zeysky District fire last?
GWIS (Copernicus) dates it between 7 July 2023 and 11 August 2023: 36 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 34,454 hectares (344.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Zeysky District (37,753 ha, 0.4 %); Tyndinsky District (310 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 30.2 °C, humidity dropped to 21 % and gusts hit 42 km/h. The fire danger index (FWI) reached 28, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 21. Their median duration was 12 days and their median area 7,659 ha; 33 % went past 10,000 ha. Only 2 of its 21 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 6.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 37,149 → 34,454 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 6,089 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.