The fire started on 1 July 2020 in Zarza la Mayor, Spain, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 156 hectares from satellite imagery, spread across a single municipality. According to EGIF (MITECO), it was detected on 30 June 2020 at 18:37 and declared extinguished on 6 July 2020.
It is the 57th largest in Cáceres since 2016 (of 70 with a page). Number 63 in Spain in 2020, of 89.
This is an index computed from weather model data, not a measurement of the fire nor an official warning. Danger warnings are issued by each country’s authority. Emergency number and official warnings ›
Weather during the fire
model
34.4°C · 23% RH
High of 34.4 °C and minimum humidity of 23% on 1 July 2020; gusts of 36 km/h on 1 July 2020.
These are model values for a cell of about 25 km, not from a weather station: they may differ from what was measured on the ground.
ⓘThis page’s change log has been kept since 24 October 2026: every night what it publishes is compared and the difference is logged. Anything earlier is reconstructed from each source’s date and marked as reconstructed.
Show
· reconstructedofficial
Matched with the official EGIF (MITECO) record
Matches: 160 ha in the official record (records: 1).
A version keeps the area, dates, name and official record; the area as it was logged (changes under 2% are not logged). The map, hotspots and weather always show today’s data.
Citation
A lede of about 60 words figures only, no adjectives
We have the Copernicus perimeter for this fire, but the VIIRS sensors did not capture it in enough detail: no day-by-day evolution, but the split by municipality is there.
Burnt area
156ha
Copernicus perimeter
Duration
1day
1 Jul 2020 – 1 Jul 2020
Municipalities hit
1
municipalities
Started on
1 Jul
2020
Danger at start
38
Very high · FWI index
Natura 2000
5%
of the perimeter is protected land
Where it burned
The weather it burned in
34°high
36km/h · peak gust
23%lowest humidity
It had gone 30 days without rain (1 mm or more) when it started.
This area had burned before
No earlier perimeters overlap this fire since 2016, when the satellite record begins.
What happened to each town
Zarza la Mayor1,096 inhabitants · 7.5 km from the centrewhere it started
155 ha
0.9 %
Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
Day
High
Min. humidity
Peak gust
Rain
Danger (FWI)
1 Jul
34.4 °C
23 %
36 km/h
0.0 mm
Very high 38
2 Jul after
30.6 °C
24 %
37 km/h
0.0 mm
Very high 40
3 Jul after
33.3 °C
18 %
31 km/h
0.0 mm
High 34
4 Jul after
36.5 °C
13 %
24 km/h
0.0 mm
Very high 42
5 Jul after
39.4 °C
9 %
25 km/h
0.0 mm
Very high 47
6 Jul after
40.7 °C
12 %
33 km/h
0.0 mm
Very high 48
7 Jul after
39.6 °C
12 %
35 km/h
0.0 mm
Extreme 51
8 Jul after
35.6 °C
15 %
34 km/h
0.0 mm
Very high 48
9 Jul after
36.1 °C
15 %
25 km/h
0.0 mm
Very high 40
10 Jul after
37.1 °C
19 %
20 km/h
0.0 mm
Very high 39
11 Jul after
38.3 °C
17 %
38 km/h
0.5 mm
Very high 47
Its twins: fires that started in the same weather
It started with an FWI of 38.3, a minimum humidity of 23% and 30 days without rain. Fires in the area that started in weather like this since 2016: 19.
FWI at the start38.3
Minimum humidity23 %
Days without rain30
this firechosen twinsrest of the area
Almost identicalSimilar
Outlines of the closest twins
This fire · Zarza la Mayor fire, July 2020
156 ha1 dayFWI 38.3Min. humidity 23 %
Celorico da Beira fire, July 2017
251 ha1 dayFWI 38.2Min. humidity 23 %89 km away, in 2017
First rain (1 mm or more) after it ended: none in the following ten days.
It stayed below its twins: 156 ha against a median of 634 ha. It lasted 1 day, against 3 days.
In 8 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.4 mm.
This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it
How it ended
—first rain
—no rain in ten days
36km/h · max. gust
It was considered over on 1 Jul, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 11 of 19, with a median of 1.4 mm.
Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
How a twin is chosen
Same area: fires that have already ended, less than 250 km from this one, since 2016.
Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
They are sorted by similarity, and the outlines of the first five are drawn.
Drag the line to compare the same ground before the fire and after it.
↔
Before · 24 Jun 2020
After · 8 Jul 2020
Sentinel-2 did not pass over on that day. Try another date, or use false colour, which is daily.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
The smoke
CAMS · Copernicus
On 1 July 2020 the air beside the fire reached 5 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).
PM2.5 peak5µg/m³
Days over the guideline0days
PM1013µg/m³
29 Jun1 Jul3 Jul
GoodFairModeratePoorVery poorExtremely poor
Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.
Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)
Copernicus dates it between 1 July 2020 and 1 July 2020: 1 day between the first and last image with fire. According to EGIF (MITECO), it was detected on 30 June 2020 at 18:37 and declared extinguished on 6 July 2020.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 156 hectares (1.6 km²). Official national figures may differ.
Which municipalities burned?
The fire only entered Zarza la Mayor (155 ha, 0.9 %).
Did the fire reach a town?
The fire started in Zarza la Mayor and came within 7.5 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 34.4 °C, humidity dropped to 23 % and gusts hit 36 km/h. The fire danger index (FWI) reached 38, class Very high.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Spain (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 19. Their median duration was 3 days and their median area 634 ha; 26 % went past 1,000 ha. In 8 of 19, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.4 mm.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
⚑Report an errorHow we know this›
Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
Dates from the perimeter: the VIIRS detections inside it did not change them. No Suomi-NPP VIIRS detections on those dates.
Compared with EGIF (MITECO): 160 official ha against 156 ha of perimeter; they agree within 25%.
Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.