Skip to content
worldfires
SS · South Sudan · –

Yirol East fire, October 2026 Yirol East

Out · last detection 10 Nov 2026, 12:04 UTC

The fire started on 30 October 2026 in Yirol East, South Sudan, and satellites saw it burning for 12 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,844 hectares from heat detections, spread across a single municipality.

Number 205 in South Sudan in 2026, of 268.

GWIS near-real-time perimeter, from the layer that changed in August 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
5,844ha
GWIS perimeter (Copernicus)
Duration
12days
30 Oct 2026 – 10 Nov 2026
Municipalities hit
1
counties
Started on
30 Oct
2026
Heat detections
140
in a single hotspot: 189 MW
Danger at start
27
High · FWI index
Average daily power
420MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 30 Oct10 Nov
10 Nov 2026

How it evolved, day by day

30 Oct 2026 · 36 MW · 2 31 Oct 2026 · 0 MW · 0 3 Nov 2026 · 3 MW · 1 4 Nov 2026 · 33 MW · 5 5 Nov 2026 · 2,137 MW · 42 6 Nov 2026 · 673 MW · 51 7 Nov 2026 · 179 MW · 11 8 Nov 2026 · 0 MW · 0 9 Nov 2026 · 220 MW · 21 10 Nov 2026 · 79 MW · 7
30 Oct 3 Nov 5 Nov 7 Nov 9 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

41°high
48km/h · peak gust
15%lowest humidity

It had gone 3 days without rain (1 mm or more) when it started. Rain came after the fire: 2.1 mm on 16 Nov.

This area had burned before

70% of the perimeter overlaps earlier fires recorded since 2016: 337 ha in 2017, 2,146 ha in 2018, 165 ha in 2023, 2,233 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 4,110 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.7% of the area of London (58 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Yirol East where it started
    5,880 ha reached on 30 Oct
    1.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
30 Oct 37.5 °C 24 % 23 km/h 0.2 mm High 27
31 Oct 37.1 °C 31 % 32 km/h 5.4 mm Moderate 16
1 Nov 37.3 °C 28 % 38 km/h 0.0 mm High 33
2 Nov 38.4 °C 25 % 36 km/h 0.2 mm High 37
3 Nov 39.8 °C 19 % 34 km/h 0.0 mm Very high 42
4 Nov 39.7 °C 21 % 48 km/h 0.0 mm Extreme 52
5 Nov 40.7 °C 17 % 47 km/h 0.0 mm Extreme 57
6 Nov 39.9 °C 20 % 44 km/h 0.0 mm Extreme 55
7 Nov 37.0 °C 30 % 31 km/h 3.5 mm High 22
8 Nov 33.8 °C 38 % 32 km/h 0.9 mm High 22
9 Nov 37.3 °C 26 % 31 km/h 0.6 mm High 35
10 Nov 37.0 °C 15 % 36 km/h 0.0 mm Extreme 55
11 Nov after 36.6 °C 14 % 28 km/h 0.0 mm Very high 48
12 Nov after 33.7 °C 26 % 31 km/h 0.0 mm Very high 42
13 Nov after 36.1 °C 23 % 34 km/h 0.0 mm Very high 44
14 Nov after 36.5 °C 33 % 30 km/h 0.0 mm Very high 43
15 Nov after 37.5 °C 25 % 35 km/h 0.2 mm Very high 45
16 Nov after 37.2 °C 27 % 53 km/h 2.1 mm High 36

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 23 Oct 2026
After · 17 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 7 November 2026 the air beside the fire reached 80 µg/m³ of PM2.5. That day averaged 49: 3.3 times the WHO daily guideline (15).

PM2.5 peak80 µg/m³
Days over the guideline10 days
PM1087 µg/m³
Optical depth1.15
28 Oct31 Oct3 Nov6 Nov9 Nov
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 140Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in South Sudan

Frequently asked questions

How long did the Yirol East fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 30 October 2026 to 10 November 2026 (12 days). The perimeter dates it from 31 October 2026 to 10 November 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,844 hectares (58.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Yirol East (5,880 ha, 1.0 %).
Is the Yirol East fire still active?
No fire detections since 10 Nov 2026, 12:04 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 40.7 °C, humidity dropped to 15 % and gusts hit 48 km/h. The fire danger index (FWI) reached 57, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of South Sudan (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 10 November 2026.
  1. Area: 5,635 → 5,844 ha.
  2. Page published (5,635 ha).

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 31 October 2026 to 10 November 2026. 140 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.