Skip to content
worldfires
RU · Russia · –

Yeniseisk Rayon fire, 7 June 2026 Yeniseisk Rayon

Out · last detection

The fire started on in Yeniseisk Rayon, Russia, and satellites saw it burning for 21 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 47,352 hectares from heat detections, spread across a single municipality.

Number 25 in Russia in 2026, of 420.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
47,352ha
GWIS perimeter (Copernicus)
Duration
21days
7 Jun 2026 – 27 Jun 2026
Municipalities hit
1
districts
Started on
7 Jun
2026
Heat detections
7,615
in a single hotspot: 259 MW
Danger at start
21
Moderate · FWI index
Average daily power
5.6GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 7 Jun27 Jun
27 Jun 2026

How it evolved, day by day

7 Jun 2026 · 578 MW · 57 8 Jun 2026 · 3,349 MW · 179 10 Jun 2026 · 45 MW · 3 12 Jun 2026 · 875 MW · 198 13 Jun 2026 · 16,112 MW · 649 14 Jun 2026 · 1,286 MW · 79 17 Jun 2026 · 5,455 MW · 815 18 Jun 2026 · 9,317 MW · 949 19 Jun 2026 · 7,664 MW · 709 20 Jun 2026 · 10,698 MW · 784 21 Jun 2026 · 4,420 MW · 536 22 Jun 2026 · 2,535 MW · 460 23 Jun 2026 · 10,092 MW · 577 24 Jun 2026 · 12,056 MW · 854 25 Jun 2026 · 7,841 MW · 443 26 Jun 2026 · 3,362 MW · 314 27 Jun 2026 · 61 MW · 9
7 Jun 13 Jun 19 Jun 23 Jun 27 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (59 passes) and with what wind. Watch the film

The weather it burned in

33°high
46km/h · peak gust
24%lowest humidity

It had gone 11 days without rain (1 mm or more) when it started. Rain came after the fire: 8.8 mm on 28 Jun.

This area had burned before

0% of the perimeter overlaps earlier fires recorded since 2016: 227 ha in 2021.

How big is it?

10 km
It burned the equivalent of 30% of the area of London (474 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Yeniseisk Rayon where it started
    46,548 ha reached on 7 Jun
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
7 Jun 32.7 °C 24 % 21 km/h 0.1 mm Moderate 21
8 Jun 30.8 °C 26 % 30 km/h 0.0 mm High 29
9 Jun 27.1 °C 45 % 23 km/h 0.3 mm Moderate 17
10 Jun 23.1 °C 59 % 26 km/h 7.9 mm Moderate 12
11 Jun 21.4 °C 55 % 32 km/h 0.1 mm Very low 3
12 Jun 26.1 °C 42 % 30 km/h 0.0 mm Low 7
13 Jun 28.3 °C 30 % 26 km/h 0.0 mm Moderate 20
14 Jun 26.2 °C 36 % 28 km/h 0.0 mm Moderate 15
15 Jun 22.7 °C 57 % 29 km/h 2.2 mm Low 5
16 Jun 23.9 °C 49 % 41 km/h 0.0 mm Moderate 13
17 Jun 21.0 °C 24 % 46 km/h 0.0 mm High 28
18 Jun 22.9 °C 27 % 21 km/h 0.0 mm Moderate 18
19 Jun 25.1 °C 31 % 24 km/h 0.0 mm Moderate 20
20 Jun 27.8 °C 31 % 22 km/h 0.0 mm High 22
21 Jun 28.3 °C 35 % 19 km/h 0.0 mm Moderate 20
22 Jun 28.6 °C 41 % 22 km/h 0.0 mm Moderate 18
23 Jun 28.3 °C 43 % 23 km/h 0.0 mm Moderate 21
24 Jun 27.6 °C 47 % 31 km/h 0.1 mm High 23
25 Jun 29.3 °C 42 % 24 km/h 1.6 mm Moderate 21
26 Jun 29.3 °C 46 % 25 km/h 4.8 mm Low 8
27 Jun 24.5 °C 56 % 22 km/h 7.8 mm Very low 1
28 Jun after 22.8 °C 65 % 18 km/h 8.8 mm Very low 0

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 31 May 2026
After · 4 Jul 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 14 June 2026 the air beside the fire reached 1,073 µg/m³ of PM2.5. That day averaged 483: 32 times the WHO daily guideline (15).

PM2.5 peak1,073 µg/m³
Days over the guideline21 days
PM101,084 µg/m³
Optical depth4.53
5 Jun11 Jun17 Jun23 Jun29 Jun
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 7,615Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Yeniseisk Rayon fire last?
GWIS (Copernicus) dates it between 7 June 2026 and 27 June 2026: 21 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 47,352 hectares (473.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Yeniseisk Rayon (46,548 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 32.7 °C, humidity dropped to 24 % and gusts hit 46 km/h. The fire danger index (FWI) reached 29, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 7,615 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.