Skip to content
worldfires
UA · Ukraine · –

Yemilchyne fire, 3 April 2020 Ємільчинський район · Yemilchyne

Out · last detection 7 Apr 2020, 10:08 UTC

The fire started on 3 April 2020 in Yemilchyne, Ukraine, and satellites saw it burning for 6 days. Copernicus mapped a burnt perimeter of 2,207 hectares from satellite imagery, spread across a single municipality.

It is the 10th largest in Zhytomyr Oblast since 2016 (of 179 with a page). Number 20 in Ukraine in 2020, of 132.

Burnt area
2,207ha
Copernicus perimeter
Duration
6days
3 Apr 2020 – 8 Apr 2020
Municipalities hit
1
districts
Started on
3 Apr
2020
Heat detections
70
in a single hotspot: 52 MW
Danger at start
24
High · FWI index
Average daily power
156MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Apr8 Apr
7 Apr 2020

How it evolved, day by day

3 Apr 2020 · 211 MW · 30 4 Apr 2020 · 381 MW · 34 5 Apr 2020 · 28 MW · 5 7 Apr 2020 · 4 MW · 1
3 Apr 4 Apr 5 Apr 7 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

20°high
49km/h · peak gust
2%lowest humidity

It had gone 11 days without rain (1 mm or more) when it started. Rain came after the fire: 1.8 mm on 14 Apr.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.4% of the area of London (22 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Yemilchyne Ємільчинський район 32,629 inhabitants · 23.1 km from the centre where it started
    2,203 ha reached on 3 Apr
    1.1 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Mixed forest48 %
  • Other natural land21 %
  • Agricultural areas14 %
  • Broadleaved forest10 %
  • Coniferous forest6.5 %

Land cover inside the perimeter as reported by Copernicus EFFIS (outside the Corine Land Cover area).

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Apr 15.0 °C 18 % 49 km/h 0.0 mm High 24
4 Apr 11.5 °C 19 % 44 km/h 0.0 mm High 24
5 Apr 11.5 °C 19 % 38 km/h 0.0 mm High 24
6 Apr 16.9 °C 5 % 26 km/h 0.0 mm Moderate 20
7 Apr 19.8 °C 2 % 32 km/h 0.0 mm High 31
8 Apr 19.3 °C 16 % 43 km/h 0.0 mm Very high 39
9 Apr after 22.7 °C 11 % 32 km/h 0.0 mm High 31
10 Apr after 11.7 °C 22 % 54 km/h 0.1 mm Very high 44
11 Apr after 13.1 °C 19 % 48 km/h 0.0 mm High 37
12 Apr after 14.8 °C 13 % 31 km/h 0.0 mm High 28
13 Apr after 22.8 °C 20 % 65 km/h 0.7 mm Very high 45
14 Apr after 6.9 °C 33 % 42 km/h 1.8 mm Low 6

Its twins: fires that started in the same weather

It started with an FWI of 23.5, a minimum humidity of 18% and 11 days without rain. Fires in the area that started in weather like this since 2020: 32.

FWI at the start 23.5
Minimum humidity 18 %
Days without rain 11
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Pulyny fire, April 2025
148 ha 2 days FWI 23.6 Min. humidity 18 % 55 km away, in 2025

First rain (1 mm or more) after it ended: 1.1 mm on 24 Apr.

What happened to them

2 days
median duration
173 ha
median area
3 %
went past 1,000 ha
2.6 mm
rain at the end (median; 32 of 32 had it)

It was 12.8 times larger than the median of its twins and lasted 6 days, against 2 days.

Only 1 of its 32 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 2.6 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.8 mmfirst rain
14 Apr6 days after it ended
49km/h · max. gust

It was considered over on 8 Apr, and on 14 Apr 1.8 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 32 of 32, with a median of 2.6 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2020.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 27 Mar 2020
After · 15 Apr 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 8 April 2020 the air beside the fire reached 24 µg/m³ of PM2.5. That day averaged 19: 1.2 times the WHO daily guideline (15).

PM2.5 peak24 µg/m³
Days over the guideline2 days
PM1029 µg/m³
1 Apr4 Apr7 Apr10 Apr
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 70Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Ukraine

Frequently asked questions

How long did the Yemilchyne fire last?
Copernicus dates it between 3 April 2020 and 8 April 2020: 6 days between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 2,207 hectares (22.1 km²). Official national figures may differ.
Which municipalities burned?
The fire only entered Yemilchyne (2,203 ha, 1.1 %).
Did the fire reach a town?
The fire started in Yemilchyne and came within 23.1 km of its centre. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 19.8 °C, humidity dropped to 2 % and gusts hit 49 km/h. The fire danger index (FWI) reached 39, class Very high.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Ukraine (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2020 with a similar FWI, humidity and dry spell: 32. Their median duration was 2 days and their median area 173 ha; 3 % went past 1,000 ha. Only 1 of its 32 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. All of them had rain in the ten days after the end: the first rainy day brought a median of 2.6 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 101 · 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 101 · 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 70 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.