Skip to content
worldfires
RU · Russia · –

Yamalsky Rayon fire, July 2023 Yamalsky Rayon

Out · last detection 14 Aug 2023, 09:23 UTC

The fire started on 30 July 2023 in Yamalsky Rayon, Russia, and satellites saw it burning for 16 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,579 hectares from heat detections, spread across a single municipality.

It is the 48th largest in Yamalo-Nenets Autonomous Okrug since 2016 (of 54 with a page). Number 353 in Russia in 2023, of 450.

Compare with…
Burnt area
3,579ha
GWIS perimeter (Copernicus)
Duration
16days
30 Jul 2023 – 14 Aug 2023
Municipalities hit
1
districts
Started on
30 Jul
2023
Heat detections
671
in a single hotspot: 118 MW
Danger at start
8
Low · FWI index
Average daily power
542MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 30 Jul14 Aug
14 Aug 2023

How it evolved, day by day

30 Jul 2023 · 46 MW · 6 31 Jul 2023 · 121 MW · 19 1 Aug 2023 · 1 MW · 1 2 Aug 2023 · 79 MW · 17 3 Aug 2023 · 125 MW · 13 4 Aug 2023 · 272 MW · 34 5 Aug 2023 · 2,195 MW · 90 6 Aug 2023 · 1,868 MW · 123 7 Aug 2023 · 1,244 MW · 87 9 Aug 2023 · 390 MW · 37 10 Aug 2023 · 361 MW · 36 11 Aug 2023 · 804 MW · 121 12 Aug 2023 · 386 MW · 58 13 Aug 2023 · 212 MW · 26 14 Aug 2023 · 25 MW · 3
30 Jul 2 Aug 5 Aug 9 Aug 12 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
55km/h · peak gust
21%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 1.8 mm on 17 Aug.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.3% of the area of London (36 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Yamalsky Rayon where it started
    3,110 ha reached on 30 Jul
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
30 Jul 23.7 °C 52 % 34 km/h 0.0 mm Low 8
31 Jul 24.0 °C 49 % 28 km/h 0.0 mm Low 11
1 Aug 21.8 °C 62 % 26 km/h 0.1 mm Moderate 12
2 Aug 28.3 °C 55 % 42 km/h 0.0 mm Moderate 19
3 Aug 27.5 °C 47 % 37 km/h 0.0 mm Moderate 21
4 Aug 29.7 °C 41 % 31 km/h 0.0 mm Moderate 20
5 Aug 28.7 °C 21 % 34 km/h 0.0 mm High 31
6 Aug 28.1 °C 30 % 22 km/h 0.0 mm High 24
7 Aug 28.6 °C 31 % 38 km/h 0.0 mm Moderate 21
8 Aug 20.2 °C 65 % 55 km/h 0.0 mm High 34
9 Aug 18.2 °C 56 % 53 km/h 0.1 mm High 32
10 Aug 15.3 °C 58 % 55 km/h 0.0 mm High 34
11 Aug 14.6 °C 51 % 55 km/h 0.0 mm High 33
12 Aug 18.2 °C 35 % 41 km/h 0.0 mm High 27
13 Aug 22.6 °C 38 % 27 km/h 0.0 mm Moderate 20
14 Aug 21.5 °C 51 % 27 km/h 0.7 mm Moderate 14
15 Aug after 21.5 °C 54 % 31 km/h 0.0 mm Low 9
16 Aug after 18.4 °C 54 % 25 km/h 0.0 mm Moderate 13
17 Aug after 17.3 °C 77 % 26 km/h 1.8 mm Low 5

Its twins: fires that started in the same weather

It started with an FWI of 8.5, a minimum humidity of 52% and rain the day before. Fires in the area that started in weather like this since 2016: 3.

FWI at the start 8.5
Minimum humidity 52 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Priuralsky Rayon fire, July 2017
3,146 ha 7 days FWI 9.2 Min. humidity 46 % 182 km away, in 2017

First rain (1 mm or more) after it ended: 12.6 mm on 1 Aug.

What happened to them

Fires in the area that started in similar weather: 3. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.8 mmfirst rain
17 Aug3 days after it ended
55km/h · max. gust

It was considered over on 14 Aug, and on 17 Aug 1.8 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 23 Jul 2023
After · 21 Aug 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 6 August 2023 the air beside the fire reached 252 µg/m³ of PM2.5. That day averaged 135: 9.0 times the WHO daily guideline (15).

PM2.5 peak252 µg/m³
Days over the guideline6 days
PM10360 µg/m³
Optical depth1.72
28 Jul1 Aug5 Aug9 Aug13 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 671Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Frequently asked questions

How long did the Yamalsky Rayon fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 30 July 2023 to 14 August 2023 (16 days). The perimeter dates it from 30 July 2023 to 13 August 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,579 hectares (35.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Yamalsky Rayon (3,110 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 29.7 °C, humidity dropped to 21 % and gusts hit 55 km/h. The fire danger index (FWI) reached 34, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 13 August 2023 → 14 August 2023.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 30 July 2023 to 13 August 2023. 671 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.