Skip to content
worldfires
CF · Central African Republic · →

Yalinga fire, March 2024 Yalinga

Out · last detection 11 Mar 2024, 11:50 UTC

The fire started on 3 March 2024 in Yalinga, Central African Republic, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 16,523 hectares from heat detections, spread across a single municipality.

It is the 79th largest in Haute-Kotto since 2016 (of 372 with a page). Number 11 in Central African Republic in 2024, of 91.

Compare with…
Burnt area
16,523ha
GWIS perimeter (Copernicus)
Duration
9days
3 Mar 2024 – 11 Mar 2024
Municipalities hit
1
sub-prefectures
Started on
3 Mar
2024
Heat detections
530
in a single hotspot: 182 MW
Danger at start
50
Very high · FWI index
Average daily power
464MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Mar11 Mar
11 Mar 2024

How it evolved, day by day

3 Mar 2024 · 10 MW · 7 4 Mar 2024 · 205 MW · 48 5 Mar 2024 · 791 MW · 61 6 Mar 2024 · 1,512 MW · 127 7 Mar 2024 · 324 MW · 110 8 Mar 2024 · 124 MW · 46 9 Mar 2024 · 785 MW · 98 10 Mar 2024 · 427 MW · 32 11 Mar 2024 · 2 MW · 1
3 Mar 5 Mar 6 Mar 7 Mar 9 Mar 11 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
36km/h · peak gust
6%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

100% of the perimeter overlaps earlier fires recorded since 2016: 12,086 ha in 2016, 11,108 ha in 2017, 11,402 ha in 2018, 10,396 ha in 2019, 25,050 ha in 2020, 3,304 ha in 2021, 15,468 ha in 2022, 7,958 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 16,628 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 10% of the area of London (165 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Yalinga where it started
    16,592 ha reached on 3 Mar
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Mar 38.2 °C 21 % 30 km/h 0.0 mm Very high 50
4 Mar 38.8 °C 15 % 26 km/h 0.0 mm Very high 47
5 Mar 39.9 °C 8 % 26 km/h 0.0 mm Extreme 51
6 Mar 39.9 °C 6 % 28 km/h 0.0 mm Extreme 53
7 Mar 38.5 °C 6 % 34 km/h 0.0 mm Extreme 58
8 Mar 39.1 °C 9 % 29 km/h 0.0 mm Extreme 60
9 Mar 39.7 °C 9 % 24 km/h 0.0 mm Extreme 52
10 Mar 39.3 °C 13 % 33 km/h 0.0 mm Extreme 56
11 Mar 38.2 °C 17 % 36 km/h 0.0 mm Extreme 56
12 Mar after 38.9 °C 20 % 30 km/h 0.0 mm Very high 50
13 Mar after 39.1 °C 21 % 35 km/h 0.9 mm Very high 43
14 Mar after 37.9 °C 25 % 26 km/h 0.3 mm Very high 44
15 Mar after 35.9 °C 28 % 32 km/h 0.0 mm Very high 43
16 Mar after 34.9 °C 32 % 31 km/h 0.5 mm Very high 39
17 Mar after 37.9 °C 23 % 30 km/h 0.0 mm Very high 40
18 Mar after 37.4 °C 27 % 32 km/h 0.8 mm Very high 39
19 Mar after 35.4 °C 29 % 24 km/h 0.4 mm High 35
20 Mar after 35.6 °C 18 % 21 km/h 0.0 mm Very high 41
21 Mar after 39.1 °C 14 % 32 km/h 0.0 mm Very high 49

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 25 Feb 2024
After · 18 Mar 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 10 March 2024 the air beside the fire reached 106 µg/m³ of PM2.5. That day averaged 73: 4.9 times the WHO daily guideline (15).

PM2.5 peak106 µg/m³
Days over the guideline14 days
PM10152 µg/m³
Optical depth1.46
1234567891011121314
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 530Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Central African Republic ›

Frequently asked questions

How long did the Yalinga fire last?
GWIS (Copernicus) dates it between 3 March 2024 and 11 March 2024: 9 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 16,523 hectares (165.2 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Yalinga (16,592 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 39.9 °C, humidity dropped to 6 % and gusts hit 36 km/h. The fire danger index (FWI) reached 60, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Central African Republic (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 530 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.