Yalinga fire, February 2020 Yalinga, Rafaï
The fire started on 7 February 2020 in Yalinga, Central African Republic, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 16,747 hectares from heat detections, spread across 2 municipalities.
It is the 78th largest in Haute-Kotto since 2016 (of 372 with a page). Number 23 in Central African Republic in 2020, of 103.
Compare with…
Suggestions: Yalinga · 2019Rafaï · 2016Yalinga · 2017Rafaï · 2019
- Burnt area
- 16,747ha
- GWIS perimeter (Copernicus)
- Duration
- 10days
- 7 Feb 2020 – 16 Feb 2020
- Municipalities hit
- 2
- sub-prefectures
- Started on
- 7 Feb
- 2020
- Heat detections
- 465
- in a single hotspot: 62 MW
- Danger at start
- 49
- Very high · FWI index
- Average daily power
- 347MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 55 days without rain (1 mm or more) when it started. Rain came after the fire: 1.5 mm on 18 Feb.
This area had burned before
74% of the perimeter overlaps earlier fires recorded since 2016: 9,091 ha in 2016, 3,119 ha in 2017, 1,282 ha in 2018, 8,638 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 12,458 ha that had burned before.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Yalinga where it started16,070 ha reached on 7 Feb0.4 %
-
740 ha reached on 10 Feb0.0 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
People and buildings inside the perimeter
GHSL 2020Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).
This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.
Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 7 Feb | 38.1 °C | 15 % | 48 km/h | 0.0 mm | Very high 49 |
| 8 Feb | 39.7 °C | 9 % | 46 km/h | 0.0 mm | Extreme 61 |
| 9 Feb | 38.1 °C | 10 % | 34 km/h | 0.0 mm | Extreme 60 |
| 10 Feb | 37.5 °C | 11 % | 39 km/h | 0.0 mm | Extreme 60 |
| 11 Feb | 37.0 °C | 12 % | 38 km/h | 0.0 mm | Extreme 60 |
| 12 Feb | 35.3 °C | 11 % | 36 km/h | 0.0 mm | Extreme 60 |
| 13 Feb | 36.7 °C | 10 % | 35 km/h | 0.0 mm | Extreme 58 |
| 14 Feb | 38.1 °C | 11 % | 36 km/h | 0.0 mm | Extreme 57 |
| 15 Feb | 38.6 °C | 11 % | 32 km/h | 0.0 mm | Extreme 57 |
| 16 Feb | 39.4 °C | 11 % | 42 km/h | 0.0 mm | Extreme 63 |
| 17 Feb after | 37.7 °C | 24 % | 32 km/h | 0.0 mm | Very high 46 |
| 18 Feb after | 35.5 °C | 31 % | 33 km/h | 1.5 mm | High 27 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 465Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 53,938 haRafaï16 January 2016 · 22 days · 27 km away
- 45,164 haYalinga1 January 2017 · 17 days · 28 km away
- 61,568 haRafaï9 January 2019 · 19 days · 34 km away
- 114,388 haYalinga18 January 2020 · 39 days · 35 km away
- 73,470 haYalinga14 January 2022 · 22 days · 37 km away
- 34,440 haRafaïFebruary 2023 · 17 days · 38 km away
Frequently asked questions
- How long did the Yalinga fire last?
- GWIS (Copernicus) dates it between 7 February 2020 and 16 February 2020: 10 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 16,747 hectares (167.5 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire entered 2 municipalities: Yalinga (16,070 ha, 0.4 %); Rafaï (740 ha, 0.0 %).
- What was the weather like?
- During the fire the temperature reached 39.7 °C, humidity dropped to 9 % and gusts hit 48 km/h. The fire danger index (FWI) reached 63, class Extreme.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Central African Republic (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 465 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
- Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.