Skip to content
worldfires
CD · Democratic Republic of the Congo · –

Yakoma fire, 22 February 2026 Yakoma

Out · last detection 12 Mar 2026, 12:10 UTC

The fire started on 22 February 2026 in Yakoma, Democratic Republic of the Congo, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 19,244 hectares from heat detections, spread across a single municipality.

We are reviewing this page: some of its data look inconsistent (the place, the dates or the area), so treat them with caution.

GWIS near-real-time perimeter, from the layer that changed in August 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…
Burnt area
19,244ha
GWIS perimeter (Copernicus)
Duration
19days
22 Feb 2026 – 12 Mar 2026
Municipalities hit
1
territories
Started on
22 Feb
2026
Heat detections
532
in a single hotspot: 65 MW
Danger at start
17
Moderate · FWI index
Average daily power
252MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 Feb12 Mar
12 Mar 2026

How it evolved, day by day

22 Feb 2026 · 168 MW · 19 23 Feb 2026 · 128 MW · 22 24 Feb 2026 · 133 MW · 11 25 Feb 2026 · 675 MW · 63 26 Feb 2026 · 547 MW · 68 27 Feb 2026 · 1,056 MW · 164 28 Feb 2026 · 301 MW · 34 1 Mar 2026 · 4 MW · 1 2 Mar 2026 · 107 MW · 10 4 Mar 2026 · 87 MW · 6 5 Mar 2026 · 69 MW · 12 6 Mar 2026 · 257 MW · 30 7 Mar 2026 · 419 MW · 37 8 Mar 2026 · 147 MW · 22 9 Mar 2026 · 3 MW · 5 11 Mar 2026 · 57 MW · 14 12 Mar 2026 · 127 MW · 14
22 Feb 27 Feb 2 Mar 7 Mar 12 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
33km/h · peak gust
18%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 11.4 mm on 15 Mar.

This area had burned before

100% of the perimeter overlaps earlier fires recorded since 2016: 734 ha in 2016, 2,222 ha in 2017, 934 ha in 2018, 17,660 ha in 2020, 9,908 ha in 2021, 5,798 ha in 2022, 6,064 ha in 2023, 2,187 ha in 2024, 1,271 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 19,368 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 12% of the area of London (192 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Yakoma where it started
    25,908 ha reached on 22 Feb
    1.6 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area5.6 ha
Residents≈ 800

Inside the perimeter there were about 5.6 hectares of built-up land and about 800 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
22 Feb 33.3 °C 42 % 30 km/h 0.0 mm Moderate 17
23 Feb 32.4 °C 43 % 30 km/h 3.3 mm Moderate 20
24 Feb 32.6 °C 42 % 22 km/h 0.7 mm Very low 3
25 Feb 34.7 °C 30 % 19 km/h 0.1 mm Moderate 19
26 Feb 34.6 °C 19 % 25 km/h 0.0 mm High 34
27 Feb 35.3 °C 19 % 29 km/h 0.0 mm High 36
28 Feb 34.2 °C 30 % 33 km/h 0.0 mm High 37
1 Mar 34.8 °C 27 % 24 km/h 0.0 mm High 31
2 Mar 31.9 °C 42 % 32 km/h 0.0 mm High 29
3 Mar 30.8 °C 48 % 25 km/h 1.0 mm Moderate 12
4 Mar 33.2 °C 34 % 21 km/h 0.3 mm High 24
5 Mar 33.3 °C 32 % 22 km/h 0.0 mm High 24
6 Mar 35.5 °C 28 % 26 km/h 0.0 mm High 29
7 Mar 36.2 °C 28 % 27 km/h 0.0 mm High 35
8 Mar 37.0 °C 26 % 29 km/h 0.0 mm Very high 41
9 Mar 38.3 °C 18 % 30 km/h 0.0 mm Very high 45
10 Mar 34.1 °C 33 % 24 km/h 0.0 mm High 34
11 Mar 35.7 °C 31 % 28 km/h 0.0 mm High 32
12 Mar 34.2 °C 38 % 27 km/h 5.9 mm High 33
13 Mar after 35.3 °C 38 % 34 km/h 0.9 mm Low 6
14 Mar after 36.7 °C 33 % 24 km/h 0.6 mm High 23
15 Mar after 26.5 °C 62 % 29 km/h 11.4 mm Very low 0

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 Feb 2026
After · 19 Mar 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 26 February 2026 the air beside the fire reached 144 µg/m³ of PM2.5. That day averaged 81: 5.4 times the WHO daily guideline (15).

PM2.5 peak144 µg/m³
Days over the guideline24 days
PM10170 µg/m³
Optical depth1.21
20 Feb25 Feb2 Mar7 Mar12 Mar
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 532Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Democratic Republic of the Congo

Frequently asked questions

How long did the Yakoma fire last?
GWIS (Copernicus) dates it between 22 February 2026 and 12 March 2026: 19 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 19,244 hectares (192.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Yakoma (25,908 ha, 1.6 %).
What was the weather like?
During the fire the temperature reached 38.3 °C, humidity dropped to 18 % and gusts hit 33 km/h. The fire danger index (FWI) reached 45, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Democratic Republic of the Congo (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 25,742 → 19,244 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 532 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.