Wulu fire, 21 November 2017 Wulu
The fire started on 21 November 2017 in Wulu, South Sudan, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,241 hectares from heat detections, spread across a single municipality.
It is the 149th largest in Lakes since 2016 (of 158 with a page). Number 193 in South Sudan in 2017, of 203.
Compare with…
Suggestions: Wulu · 2016Tonj South · 2016Wulu · 2017Wulu · 2017
- Burnt area
- 5,241ha
- GWIS perimeter (Copernicus)
- Duration
- 8days
- 21 Nov 2017 – 28 Nov 2017
- Municipalities hit
- 1
- counties
- Started on
- 21 Nov
- 2017
- Heat detections
- 159
- in a single hotspot: 179 MW
- Danger at start
- 21
- Moderate · FWI index
- Average daily power
- 365MW
- detected power per day, on average
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone 5 days without rain (1 mm or more) when it started.
This area had burned before
58% of the perimeter overlaps earlier fires recorded since 2016: 3,512 ha in 2016. Part of it burned more than once, so the yearly figures add up to more than the 3,040 ha that had burned before.
How big is it?
London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).
Paris boundary: geoBoundaries · Institut national de l'information géographique et forestière (IGN-F) (Etalab Open License 2.0).
Madrid boundary: geoBoundaries · Open Data ESRI, IGN Central Registry of Cartography Area (CC BY 4.0).
Berlin boundary: geoBoundaries · Federal Agency for Cartography and Geodesy (dl-de/by-2-0).
This compares size, not location: both shapes are at the same scale, north up, centred on each other.
What happened to each town
-
Wulu where it started5,277 ha reached on 21 Nov0.4 %
Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 21 Nov | 34.6 °C | 28 % | 23 km/h | 0.0 mm | Moderate 21 |
| 22 Nov | 35.3 °C | 19 % | 27 km/h | 0.0 mm | High 24 |
| 23 Nov | 34.7 °C | 17 % | 32 km/h | 0.0 mm | High 29 |
| 24 Nov | 33.8 °C | 18 % | 30 km/h | 0.0 mm | High 30 |
| 25 Nov | 34.2 °C | 20 % | 28 km/h | 0.0 mm | High 30 |
| 26 Nov | 35.2 °C | 24 % | 30 km/h | 0.0 mm | High 31 |
| 27 Nov | 33.6 °C | 37 % | 26 km/h | 0.0 mm | High 22 |
| 28 Nov | 32.9 °C | 34 % | 31 km/h | 0.0 mm | High 25 |
| 29 Nov after | 33.5 °C | 36 % | 29 km/h | 0.0 mm | High 23 |
| 30 Nov after | 34.5 °C | 34 % | 27 km/h | 0.0 mm | High 23 |
| 1 Dec after | 33.3 °C | 34 % | 23 km/h | 0.0 mm | High 23 |
| 2 Dec after | 34.1 °C | 27 % | 24 km/h | 0.0 mm | High 24 |
| 3 Dec after | 35.3 °C | 24 % | 24 km/h | 0.0 mm | High 26 |
| 4 Dec after | 36.5 °C | 22 % | 29 km/h | 0.0 mm | High 29 |
| 5 Dec after | 36.8 °C | 21 % | 22 km/h | 0.0 mm | High 30 |
| 6 Dec after | 36.9 °C | 21 % | 21 km/h | 0.0 mm | High 30 |
| 7 Dec after | 36.7 °C | 19 % | 24 km/h | 0.0 mm | High 33 |
| 8 Dec after | 36.4 °C | 17 % | 38 km/h | 0.0 mm | Very high 39 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 159Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 23,328 haWulu5 December 2016 · 14 days · 22 km away
- 108,462 haTonj South5 December 2016 · 23 days · 31 km away
- 23,579 haWulu30 November 2017 · 16 days · 32 km away
- 20,450 haWulu30 November 2017 · 15 days · 33 km away
- 21,134 haWulu16 January 2020 · 10 days · 34 km away
- 27,256 haTonj South4 January 2020 · 18 days · 40 km away
Frequently asked questions
- How long did the Wulu fire last?
- GWIS (Copernicus) dates it between 21 November 2017 and 28 November 2017: 8 days between the first and last heat detection of the perimeter.
- How much area did it burn?
- The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,241 hectares (52.4 km²). It is an estimate: official national figures may differ.
- Which municipalities burned?
- The fire only entered Wulu (5,277 ha, 0.4 %).
- What was the weather like?
- During the fire the temperature reached 35.3 °C, humidity dropped to 17 % and gusts hit 32 km/h. The fire danger index (FWI) reached 31, class High.
- Where does this data come from?
- From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of South Sudan (geoBoundaries). It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Satellite cross-check
History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
No changes since 24 October 2026.
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
How we know this
- Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
- Dates from the perimeter: the VIIRS detections inside it did not change them. 159 Suomi-NPP VIIRS detections on those dates.
- We have not matched this page with any official record.
- Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
Where this data comes from
The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.