Skip to content
worldfires
US · United States · –

Wood Fire, September 2024 Pinal

Out · last detection 6 Sept 2024, 09:50 UTC

The fire started on 1 September 2024 in Pinal, United States, and satellites saw it burning for 6 days. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 2,860 hectares, spread across a single county.

It is the 108th largest in Arizona since 2016 (of 380 with a page). Number 117 in United States in 2024, of 371.

The power measured by the satellite is low (13.7 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
2,860ha
official perimeter (MTBS / NIFC)
Duration
≈ 6days
1 Sept 2024 – 6 Sept 2024
Counties hit
1
counties
Started on
1 Sept
2024
Heat detections
63
in a single hotspot: 14 MW
Danger at start
42
Very high · FWI index
Average daily power
53MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 1 Sept6 Sept
6 Sept 2024

How it evolved, day by day

2 Sept 2024 · 52 MW · 16 3 Sept 2024 · 26 MW · 7 4 Sept 2024 · 36 MW · 7 5 Sept 2024 · 130 MW · 31 6 Sept 2024 · 23 MW · 2
2 Sept 3 Sept 4 Sept 5 Sept 6 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
55km/h · peak gust
13%lowest humidity

It had gone 8 days without rain (1 mm or more) when it started. Rain came after the fire: 1.5 mm on 16 Sept.

This area had burned before

100% of the perimeter overlaps earlier fires recorded since 2016: 2,853 ha in 2021.

How big is it?

10 km
It burned the equivalent of 1.8% of the area of London (29 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each county

  1. Pinal where it started
    2,870 ha reached on 2 Sept
    0.2 %

Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
1 Sept 34.9 °C 19 % 38 km/h 0.9 mm Very high 42
2 Sept 34.7 °C 20 % 51 km/h 0.0 mm Very high 46
3 Sept 35.2 °C 17 % 48 km/h 0.0 mm Very high 45
4 Sept 36.9 °C 18 % 40 km/h 0.0 mm Very high 44
5 Sept 38.7 °C 13 % 31 km/h 0.0 mm Very high 47
6 Sept 36.6 °C 19 % 55 km/h 0.0 mm Extreme 58
7 Sept after 34.9 °C 18 % 53 km/h 0.0 mm Extreme 56
8 Sept after 35.1 °C 13 % 53 km/h 0.0 mm Extreme 61
9 Sept after 35.7 °C 8 % 45 km/h 0.0 mm Extreme 58
10 Sept after 36.9 °C 10 % 24 km/h 0.0 mm Extreme 50
11 Sept after 36.1 °C 11 % 43 km/h 0.0 mm Extreme 58
12 Sept after 35.4 °C 10 % 54 km/h 0.0 mm Extreme 64
13 Sept after 34.2 °C 10 % 46 km/h 0.0 mm Extreme 60
14 Sept after 33.0 °C 29 % 27 km/h 0.0 mm High 38
15 Sept after 32.9 °C 30 % 44 km/h 0.2 mm Very high 40
16 Sept after 31.1 °C 35 % 48 km/h 1.5 mm High 27

Its twins: fires that started in the same weather

It started with an FWI of 42.4, a minimum humidity of 19% and 8 days without rain. Fires in the area that started in weather like this since 2016: 25.

FWI at the start 42.4
Minimum humidity 19 %
Days without rain 8
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Verde Fire, August 2019
1,091 ha 3 days FWI 40.2 Min. humidity 19 % 71 km away, in 2019

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

4 days
median duration
1,061 ha
median area
56 %
went past 1,000 ha
2.0 mm
rain at the end (median; 21 of 25 had it)

It was 2.7 times larger than the median of its twins and lasted 6 days, against 4 days.

Only 5 of its 25 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 4 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.5 mmfirst rain
16 Sept10 days after it ended
55km/h · max. gust

It was considered over on 6 Sept, and on 16 Sept 1.5 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 21 of 25, with a median of 2.0 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 25 Aug 2024
After · 13 Sept 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 2 September 2024 the air beside the fire reached 14 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak14 µg/m³
Days over the guideline0 days
PM1027 µg/m³
Optical depth0.30
30 Aug1 Sept3 Sept5 Sept7 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 63Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in United States

Frequently asked questions

How long did the Wood Fire last?
The official perimeter only gives the start date (1 September 2024). The end comes from the heat detections inside the perimeter: it burned until 6 September 2024 (6 days from 1 September 2024), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The official perimeter published by United States agencies (MTBS / NIFC) is 2,860 hectares (28.6 km²). Other tallies, such as daily incident reports, may give slightly different figures.
Which counties burned?
The fire only entered Pinal (2,870 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 38.7 °C, humidity dropped to 13 % and gusts hit 55 km/h. The fire danger index (FWI) reached 58, class Extreme.
Where does this data come from?
From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 25. Their median duration was 4 days and their median area 1,061 ha; 56 % went past 1,000 ha. Only 5 of its 25 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 4 of 25, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.0 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: MTBS (US Geological Survey and US Forest Service), official.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 63 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.