Skip to content
worldfires
TH · Thailand · –

Wiang Haeng fire, 24 March 2020 เวียงแหง · Wiang Haeng, Pai

Out · last detection 7 Apr 2020, 06:36 UTC

The fire started on 24 March 2020 in Wiang Haeng, Thailand, and satellites saw it burning for 15 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,008 hectares from heat detections, spread across 2 municipalities.

It is the 314th largest in Chiang Mai Province since 2016 (of 319 with a page). Number 451 in Thailand in 2020, of 457.

The power measured by the satellite is low (12.2 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
1,008ha
GWIS perimeter (Copernicus)
Duration
15days
24 Mar 2020 – 7 Apr 2020
Municipalities hit
2
districts
Started on
24 Mar
2020
Heat detections
39
in a single hotspot: 12 MW
Danger at start
49
Very high · FWI index
Average daily power
17MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 Mar7 Apr
7 Apr 2020

How it evolved, day by day

24 Mar 2020 · 43 MW · 8 25 Mar 2020 · 24 MW · 5 26 Mar 2020 · 20 MW · 2 31 Mar 2020 · 1 MW · 1 1 Apr 2020 · 7 MW · 2 2 Apr 2020 · 37 MW · 15 3 Apr 2020 · 14 MW · 3 5 Apr 2020 · 3 MW · 2 7 Apr 2020 · 3 MW · 1
24 Mar 26 Mar 1 Apr 3 Apr 7 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
49km/h · peak gust
14%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 2.7 mm on 14 Apr.

This area had burned before

21% of the perimeter overlaps earlier fires recorded since 2016: 129 ha in 2016, 144 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 214 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 0.6% of the area of London (10 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Wiang Haeng เวียงแหง where it started
    551 ha reached on 24 Mar
    0.8 %
  2. Pai ปาย
    463 ha reached on 1 Apr
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 15 % of the area in Thailand

Day High Min. humidity Peak gust Rain Danger (FWI)
24 Mar 31.5 °C 20 % 49 km/h 0.0 mm Very high 49
25 Mar 31.0 °C 19 % 48 km/h 0.0 mm Very high 50
26 Mar 31.6 °C 20 % 47 km/h 0.0 mm Extreme 52
27 Mar 32.6 °C 22 % 37 km/h 0.0 mm Very high 47
28 Mar 33.9 °C 22 % 32 km/h 0.0 mm Very high 40
29 Mar 33.8 °C 25 % 38 km/h 0.0 mm Very high 46
30 Mar 34.3 °C 24 % 38 km/h 0.0 mm Very high 45
31 Mar 35.1 °C 22 % 36 km/h 0.0 mm Very high 41
1 Apr 34.8 °C 17 % 41 km/h 0.0 mm Very high 49
2 Apr 34.0 °C 18 % 46 km/h 0.0 mm Extreme 52
3 Apr 34.7 °C 14 % 42 km/h 0.0 mm Extreme 51
4 Apr 34.3 °C 18 % 37 km/h 0.0 mm Very high 50
5 Apr 33.6 °C 20 % 46 km/h 0.0 mm Extreme 53
6 Apr 32.6 °C 26 % 49 km/h 0.0 mm Extreme 57
7 Apr 32.7 °C 21 % 45 km/h 0.0 mm Extreme 54
8 Apr after 32.8 °C 22 % 30 km/h 0.0 mm Very high 43
9 Apr after 32.3 °C 26 % 31 km/h 0.0 mm Very high 42
10 Apr after 33.4 °C 18 % 45 km/h 0.0 mm Extreme 51
11 Apr after 33.2 °C 26 % 31 km/h 0.1 mm Very high 38
12 Apr after 32.9 °C 29 % 32 km/h 0.0 mm High 38
13 Apr after 34.0 °C 16 % 40 km/h 0.1 mm Very high 42
14 Apr after 31.3 °C 33 % 32 km/h 2.7 mm Moderate 12

Its twins: fires that started in the same weather

It started with an FWI of 49.0, a minimum humidity of 20% and more than two months without rain. Fires in the area that started in weather like this since 2016: 34.

FWI at the start 49.0
Minimum humidity 20 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Pang Mapha fire, March 2020
1,059 ha 6 days FWI 46.8 Min. humidity 20 % 48 km away, in 2020

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

11 days
median duration
2,089 ha
median area
100 %
went past 1,000 ha
1.8 mm
rain at the end (median; 11 of 34 had it)

It stayed below its twins: 1,008 ha against a median of 2,089 ha. It lasted 15 days, against 11 days.

In 23 of 34, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.7 mmfirst rain
14 Apr7 days after it ended
49km/h · max. gust

It was considered over on 7 Apr, and on 14 Apr 2.7 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 11 of 34, with a median of 1.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 Mar 2020
After · 14 Apr 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 39Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Thailand

Frequently asked questions

How long did the Wiang Haeng fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 24 March 2020 to 7 April 2020 (15 days). The perimeter dates it from 31 March 2020 to 3 April 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,008 hectares (10.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Wiang Haeng (551 ha, 0.8 %); Pai (463 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 35.1 °C, humidity dropped to 14 % and gusts hit 49 km/h. The fire danger index (FWI) reached 57, class Extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Thailand (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 34. Their median duration was 11 days and their median area 2,089 ha; 100 % went past 1,000 ha. In 23 of 34, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 199 · 191 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 3 April 2020 → 7 April 2020.
  2. Start date: 31 March 2020 → 24 March 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 199 · 191.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 31 March 2020 to 3 April 2020. 39 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.