Skip to content
worldfires
AU · Australia · –

Whitsunday fire, 4 December 2025 Whitsunday

Out · last detection 14 Dec 2025, 15:15 UTC

The fire started on 4 December 2025 in Whitsunday, Australia, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 10,481 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…
Burnt area
10,481ha
GWIS perimeter (Copernicus)
Duration
11days
4 Dec 2025 – 14 Dec 2025
Municipalities hit
1
local government areas
Started on
4 Dec
2025
Heat detections
328
in a single hotspot: 39 MW
Danger at start
5
Very low · FWI index
Average daily power
246MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 4 Dec14 Dec
14 Dec 2025

How it evolved, day by day

5 Dec 2025 · 902 MW · 71 6 Dec 2025 · 106 MW · 21 7 Dec 2025 · 266 MW · 45 8 Dec 2025 · 36 MW · 19 9 Dec 2025 · 192 MW · 35 10 Dec 2025 · 207 MW · 28 11 Dec 2025 · 199 MW · 22 12 Dec 2025 · 18 MW · 7 13 Dec 2025 · 424 MW · 64 14 Dec 2025 · 110 MW · 16
5 Dec 7 Dec 9 Dec 11 Dec 13 Dec

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

33°high
52km/h · peak gust
32%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 1.3 mm on 23 Dec.

This area had burned before

70% of the perimeter overlaps earlier fires recorded since 2016: 772 ha in 2016, 3,221 ha in 2017, 74 ha in 2018, 662 ha in 2019, 1,954 ha in 2020, 207 ha in 2021, 1,192 ha in 2022, 3,971 ha in 2023, 1,362 ha in 2024. Part of it burned more than once, so the yearly figures add up to more than the 7,297 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 6.6% of the area of London (105 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Whitsunday where it started
    10,511 ha reached on 5 Dec
    0.4 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
2 Dec 32.8 °C 32 % 35 km/h 0.0 mm Very low 5
3 Dec 29.5 °C 47 % 52 km/h 0.0 mm Low 9
4 Dec 28.8 °C 47 % 52 km/h 0.0 mm Low 10
5 Dec 29.0 °C 48 % 46 km/h 0.0 mm Low 10
6 Dec 30.0 °C 45 % 39 km/h 0.0 mm Low 9
7 Dec 30.0 °C 46 % 36 km/h 0.0 mm Low 10
8 Dec 29.4 °C 45 % 37 km/h 0.0 mm Low 10
9 Dec 30.6 °C 49 % 43 km/h 0.0 mm Moderate 12
10 Dec 30.6 °C 46 % 45 km/h 0.0 mm Moderate 13
11 Dec 30.2 °C 46 % 45 km/h 0.0 mm Moderate 13
12 Dec 30.0 °C 50 % 38 km/h 0.3 mm Moderate 12
13 Dec 31.3 °C 44 % 40 km/h 0.0 mm Moderate 13
14 Dec 31.2 °C 48 % 34 km/h 0.0 mm Moderate 13
15 Dec after 31.9 °C 49 % 36 km/h 0.2 mm Moderate 14
16 Dec after 30.3 °C 55 % 43 km/h 3.2 mm Very low 4
17 Dec after 30.5 °C 47 % 49 km/h 0.7 mm Low 11
18 Dec after 29.8 °C 56 % 50 km/h 0.9 mm Low 10
19 Dec after 31.2 °C 50 % 45 km/h 0.1 mm Moderate 12
20 Dec after 30.1 °C 53 % 39 km/h 0.0 mm Moderate 12
21 Dec after 31.6 °C 53 % 36 km/h 0.1 mm Moderate 12
22 Dec after 31.9 °C 53 % 35 km/h 0.0 mm Moderate 12
23 Dec after 31.7 °C 60 % 38 km/h 1.3 mm Low 7

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 27 Nov 2025
After · 21 Dec 2025

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 14 December 2025 the air beside the fire reached 19 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak19 µg/m³
Days over the guideline0 days
PM1021 µg/m³
Optical depth0.33
2 Dec6 Dec10 Dec14 Dec
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 328Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Whitsunday fire last?
GWIS (Copernicus) dates it between 4 December 2025 and 14 December 2025: 11 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 10,481 hectares (104.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Whitsunday (10,511 ha, 0.4 %).
What was the weather like?
During the fire the temperature reached 32.8 °C, humidity dropped to 32 % and gusts hit 52 km/h. The fire danger index (FWI) reached 14, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 328 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.