Skip to content
worldfires
AU · Australia · –

West Arnhem fire, 20 July 2026 West Arnhem

Out · last detection 2 Aug 2026, 16:30 UTC

The fire started on 20 July 2026 in West Arnhem, Australia, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,058 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
8,058ha
GWIS perimeter (Copernicus)
Duration
14days
20 Jul 2026 – 2 Aug 2026
Municipalities hit
1
local government areas
Started on
20 Jul
2026
Heat detections
180
in a single hotspot: 137 MW
Danger at start
33
High · FWI index
Average daily power
93MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 20 Jul2 Aug
2 Aug 2026

How it evolved, day by day

20 Jul 2026 · 10 MW · 2 21 Jul 2026 · 31 MW · 6 22 Jul 2026 · 124 MW · 23 23 Jul 2026 · 90 MW · 21 24 Jul 2026 · 109 MW · 22 25 Jul 2026 · 601 MW · 43 26 Jul 2026 · 54 MW · 13 27 Jul 2026 · 45 MW · 12 28 Jul 2026 · 57 MW · 19 29 Jul 2026 · 55 MW · 14 31 Jul 2026 · 1 MW · 2 1 Aug 2026 · 28 MW · 2 2 Aug 2026 · 0 MW · 1
20 Jul 25 Jul 29 Jul 2 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
52km/h · peak gust
19%lowest humidity

It had gone 32 days without rain (1 mm or more) when it started.

This area had burned before

94% of the perimeter overlaps earlier fires recorded since 2016: 2,404 ha in 2016, 2,012 ha in 2017, 938 ha in 2018, 1,277 ha in 2019, 2,317 ha in 2020, 139 ha in 2021, 3,775 ha in 2022, 176 ha in 2023, 4,179 ha in 2024, 112 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 7,561 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 5.1% of the area of London (81 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. West Arnhem where it started
    8,122 ha reached on 20 Jul
    0.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
20 Jul 28.6 °C 29 % 41 km/h 0.0 mm High 33
21 Jul 28.7 °C 30 % 37 km/h 0.0 mm High 32
22 Jul 28.8 °C 30 % 27 km/h 0.0 mm High 29
23 Jul 29.9 °C 33 % 39 km/h 0.0 mm High 38
24 Jul 28.4 °C 44 % 52 km/h 0.2 mm High 37
25 Jul 27.7 °C 27 % 52 km/h 0.0 mm Very high 40
26 Jul 27.7 °C 40 % 47 km/h 0.0 mm High 36
27 Jul 28.2 °C 28 % 41 km/h 0.0 mm High 34
28 Jul 29.2 °C 19 % 37 km/h 0.0 mm Very high 39
29 Jul 28.6 °C 36 % 36 km/h 0.0 mm High 35
30 Jul 28.0 °C 51 % 46 km/h 0.5 mm High 30
31 Jul 29.6 °C 40 % 46 km/h 0.0 mm High 31
1 Aug 30.5 °C 29 % 46 km/h 0.0 mm High 37
2 Aug 30.4 °C 29 % 40 km/h 0.0 mm High 35
3 Aug after 30.1 °C 44 % 42 km/h 0.1 mm High 34
4 Aug after 29.5 °C 36 % 42 km/h 0.0 mm High 33
5 Aug after 30.4 °C 30 % 44 km/h 0.0 mm High 35
6 Aug after 30.7 °C 31 % 38 km/h 0.0 mm High 32
7 Aug after 31.1 °C 27 % 38 km/h 0.0 mm High 36
8 Aug after 31.1 °C 28 % 33 km/h 0.0 mm High 33
9 Aug after 30.8 °C 37 % 22 km/h 0.0 mm High 32
10 Aug after 32.0 °C 36 % 23 km/h 0.0 mm High 33
11 Aug after 31.2 °C 37 % 24 km/h 0.0 mm High 31
12 Aug after 32.3 °C 39 % 26 km/h 0.0 mm High 32

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 13 Jul 2026
After · 9 Aug 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 20 July 2026 the air beside the fire reached 56 µg/m³ of PM2.5. That day averaged 32: 2.2 times the WHO daily guideline (15).

PM2.5 peak56 µg/m³
Days over the guideline8 days
PM1059 µg/m³
Optical depth0.75
18 Jul23 Jul28 Jul2 Aug7 Aug
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 180Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the West Arnhem fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 20 July 2026 to 2 August 2026 (14 days). The perimeter dates it from 20 July 2026 to 1 August 2026.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,058 hectares (80.6 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered West Arnhem (8,122 ha, 0.2 %).
What was the weather like?
During the fire the temperature reached 30.5 °C, humidity dropped to 19 % and gusts hit 52 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 1 August 2026 → 2 August 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 20 July 2026 to 1 August 2026. 180 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.