Skip to content
worldfires
US · United States · –

Warm Springs Fire, August 2022 Idaho

Out · last detection 15 Sept 2022, 08:45 UTC

The fire started on 31 August 2022 in Idaho, United States, and satellites saw it burning for 16 days. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 2,340 hectares, spread across a single county.

It is the 125th largest in Idaho since 2016 (of 379 with a page). Number 183 in United States in 2022, of 493.

Burnt area
2,340ha
official perimeter (MTBS / NIFC)
Duration
≈ 16days
31 Aug 2022 – 15 Sept 2022
Counties hit
1
counties
Started on
31 Aug
2022
Heat detections
563
in a single hotspot: 175 MW
Danger at start
37
High · FWI index
Average daily power
330MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 31 Aug15 Sept
15 Sept 2022

How it evolved, day by day

31 Aug 2022 · 333 MW · 7 1 Sept 2022 · 856 MW · 28 2 Sept 2022 · 1,229 MW · 59 3 Sept 2022 · 230 MW · 63 4 Sept 2022 · 221 MW · 92 5 Sept 2022 · 86 MW · 22 6 Sept 2022 · 533 MW · 55 7 Sept 2022 · 217 MW · 49 8 Sept 2022 · 324 MW · 61 9 Sept 2022 · 112 MW · 22 10 Sept 2022 · 235 MW · 28 11 Sept 2022 · 143 MW · 32 12 Sept 2022 · 95 MW · 44 15 Sept 2022 · 1 MW · 1
2 Sept 6 Sept 9 Sept 12 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
73km/h · peak gust
12%lowest humidity

It had gone 5 days without rain (1 mm or more) when it started. Rain came after the fire: 1.1 mm on 16 Sept.

This area had burned before

0% of the perimeter overlaps earlier fires recorded since 2016: 4 ha in 2021.

How big is it?

10 km
It burned the equivalent of 1.5% of the area of London (23 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each county

  1. Idaho where it started
    2,354 ha reached on 31 Aug
    0.1 %

Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
31 Aug 30.1 °C 15 % 38 km/h 0.0 mm High 37
1 Sept 26.7 °C 21 % 45 km/h 0.0 mm Very high 48
2 Sept 30.5 °C 12 % 24 km/h 0.0 mm High 36
3 Sept 28.9 °C 17 % 62 km/h 0.2 mm Very high 48
4 Sept 26.4 °C 16 % 48 km/h 0.0 mm Extreme 53
5 Sept 24.3 °C 21 % 51 km/h 0.0 mm Extreme 50
6 Sept 30.4 °C 14 % 43 km/h 0.0 mm Very high 45
7 Sept 26.7 °C 20 % 73 km/h 0.5 mm Extreme 58
8 Sept 17.3 °C 14 % 55 km/h 0.0 mm Extreme 56
9 Sept 16.0 °C 26 % 39 km/h 0.0 mm Very high 40
10 Sept 22.7 °C 16 % 22 km/h 0.0 mm High 32
11 Sept 23.5 °C 16 % 42 km/h 0.0 mm Very high 42
12 Sept 25.5 °C 13 % 41 km/h 0.0 mm Very high 40
13 Sept 16.2 °C 37 % 18 km/h 1.2 mm Moderate 14
14 Sept 19.0 °C 36 % 27 km/h 0.9 mm High 23
15 Sept 16.6 °C 57 % 34 km/h 7.1 mm Moderate 15
16 Sept after 14.2 °C 49 % 42 km/h 1.1 mm Very low 1

Its twins: fires that started in the same weather

It started with an FWI of 37.2, a minimum humidity of 15% and 5 days without rain. Fires in the area that started in weather like this since 2016: 24.

FWI at the start 37.2
Minimum humidity 15 %
Days without rain 5
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Moose Fire, August 2016
3,720 ha 18 days FWI 35.0 Min. humidity 16 % 19 km away, in 2016

First rain (1 mm or more) after it ended: 3.0 mm on 4 Sept.

What happened to them

29 days
median duration
2,152 ha
median area
71 %
went past 1,000 ha
5.1 mm
rain at the end (median; 20 of 24 had it)

It burned an area similar to its twins (2,340 ha against a median of 2,152 ha) and lasted 16 days, against 29 days.

In 4 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.1 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.1 mmfirst rain
16 Septthe day after it ended
73km/h · max. gust

It was considered over on 15 Sept, and on 16 Sept 1.1 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 20 of 24, with a median of 5.1 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 24 Aug 2022
After · 22 Sept 2022

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 3 September 2022 the air beside the fire reached 168 µg/m³ of PM2.5. That day averaged 82: 5.5 times the WHO daily guideline (15).

PM2.5 peak168 µg/m³
Days over the guideline3 days
PM10240 µg/m³
Optical depth1.28
29 Aug31 Aug2 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 563Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in United States

Frequently asked questions

How long did the Warm Springs Fire last?
The official perimeter only gives the start date (31 August 2022). The end comes from the heat detections inside the perimeter: it burned until 15 September 2022 (16 days from 31 August 2022), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The official perimeter published by United States agencies (MTBS / NIFC) is 2,340 hectares (23.4 km²). Other tallies, such as daily incident reports, may give slightly different figures.
Which counties burned?
The fire only entered Idaho (2,354 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 30.5 °C, humidity dropped to 12 % and gusts hit 73 km/h. The fire danger index (FWI) reached 58, class Extreme.
Where does this data come from?
From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 24. Their median duration was 29 days and their median area 2,152 ha; 71 % went past 1,000 ha. In 4 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 5.1 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: MTBS (US Geological Survey and US Forest Service), official.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. 563 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.