Skip to content
worldfires
BO · Bolivia · –

Villa Tunari fire, 10 November 2023 Villa Tunari

Out · last detection

The fire started on in Villa Tunari, Bolivia, and satellites saw it burning for 11 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,085 hectares from heat detections, spread across a single municipality.

It is number 30 by size of the 31 fires with a page that started in Cochabamba since 2016. Number 241 in Bolivia in 2023, of 247.

Burnt area
3,085ha
GWIS perimeter (Copernicus)
Duration
11days
10 Nov 2023 – 20 Nov 2023
Municipalities hit
1
municipalities
Started on
10 Nov
2023
Heat detections
109
in a single hotspot: 136 MW
Danger at start
15
Moderate · FWI index
Average daily power
67MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 10 Nov20 Nov
20 Nov 2023

How it evolved, day by day

10 Nov 2023 · 4 MW · 1 11 Nov 2023 · 31 MW · 3 12 Nov 2023 · 33 MW · 4 13 Nov 2023 · 8 MW · 1 14 Nov 2023 · 7 MW · 5 16 Nov 2023 · 51 MW · 14 17 Nov 2023 · 233 MW · 16 18 Nov 2023 · 179 MW · 23 19 Nov 2023 · 31 MW · 3 20 Nov 2023 · 96 MW · 39
10 Nov 12 Nov 14 Nov 17 Nov 19 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

40°high
67km/h · peak gust
31%lowest humidity

It had gone 6 days without rain (1 mm or more) when it started. Rain came after the fire: 7.8 mm on 21 Nov.

This area had burned before

20% of the perimeter overlaps earlier fires recorded since 2016: 120 ha in 2016, 126 ha in 2017, 426 ha in 2019, 158 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 612 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 1.9% of the area of London (31 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Villa Tunari 334,685 inhabitants where it started
    3,100 ha
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
10 Nov 38.0 °C 42 % 42 km/h 0.2 mm Moderate 15
11 Nov 39.6 °C 32 % 50 km/h 0.0 mm High 24
12 Nov 39.9 °C 31 % 53 km/h 0.2 mm High 29
13 Nov 39.4 °C 40 % 55 km/h 4.9 mm High 24
14 Nov 37.6 °C 43 % 52 km/h 4.2 mm Low 6
15 Nov 38.4 °C 39 % 53 km/h 1.1 mm Moderate 21
16 Nov 38.9 °C 41 % 59 km/h 0.1 mm High 22
17 Nov 39.9 °C 31 % 67 km/h 0.0 mm High 30
18 Nov 39.5 °C 34 % 64 km/h 0.0 mm High 35
19 Nov 33.9 °C 47 % 36 km/h 12.6 mm Very low 0
20 Nov 30.3 °C 71 % 32 km/h 15.6 mm Very low 0
21 Nov after 30.4 °C 69 % 47 km/h 7.8 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 14.7, a minimum humidity of 42% and 6 days without rain. Fires in the area that started in weather like this since 2016: 24.

FWI at the start 14.7
Minimum humidity 42 %
Days without rain 6
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Yapacaní fire, October 2023
5,902 ha 14 days FWI 14.7 Min. humidity 41 % 77 km away, in 2023

First rain (1 mm or more) after it ended: 8.7 mm on 26 Oct.

What happened to them

14 days
median duration
5,364 ha
median area
25 %
went past 10,000 ha
7.2 mm
rain at the end (median; 22 of 24 had it)

It stayed below its twins: 3,085 ha against a median of 5,364 ha. It lasted 11 days, against 14 days.

In 2 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 7.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

7.8 mmfirst rain
21 Novthe day after it ended
67km/h · max. gust

It was considered over on 20 Nov, and on 21 Nov 7.8 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 22 of 24, with a median of 7.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 3 Nov 2023
After · 27 Nov 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 20 November 2023 the air beside the fire reached 279 µg/m³ of PM2.5. That day averaged 168: 11 times the WHO daily guideline (15).

PM2.5 peak279 µg/m³
Days over the guideline16 days
PM10400 µg/m³
Optical depth5.95
8 Nov12 Nov16 Nov20 Nov
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 109Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Bolivia

Frequently asked questions

How long did the Villa Tunari fire last?
GWIS (Copernicus) dates it between 10 November 2023 and 20 November 2023: 11 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,085 hectares (30.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Villa Tunari (3,100 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 39.9 °C, humidity dropped to 31 % and gusts hit 67 km/h. The fire danger index (FWI) reached 35, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Bolivia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 24. Their median duration was 14 days and their median area 5,364 ha; 25 % went past 10,000 ha. In 2 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 7.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 119 · 110 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 119 · 110.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 109 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Public Domain). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.