Skip to content
worldfires
PY · Paraguay · –

Villa Hayes fire, 2 August 2020 Villa Hayes, Concepcion

Out · last detection

The fire started on in Villa Hayes, Paraguay, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 5,488 hectares from heat detections, spread across 2 municipalities.

It is number 99 by size of the 709 fires with a page that started in PRESIDENTE HAYES since 2016. Number 69 in Paraguay in 2020, of 422.

Burnt area
5,488ha
GWIS perimeter (Copernicus)
Duration
10days
2 Aug 2020 – 11 Aug 2020
Municipalities hit
2
districts
Started on
2 Aug
2020
Heat detections
263
in a single hotspot: 220 MW
Danger at start
35
High · FWI index
Average daily power
318MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 2 Aug11 Aug
11 Aug 2020

How it evolved, day by day

2 Aug 2020 · 18 MW · 2 3 Aug 2020 · 30 MW · 2 4 Aug 2020 · 94 MW · 9 5 Aug 2020 · 206 MW · 35 6 Aug 2020 · 198 MW · 32 7 Aug 2020 · 132 MW · 14 8 Aug 2020 · 319 MW · 21 9 Aug 2020 · 197 MW · 28 10 Aug 2020 · 1,382 MW · 50 11 Aug 2020 · 607 MW · 70
2 Aug 4 Aug 6 Aug 8 Aug 10 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
46km/h · peak gust
19%lowest humidity

It had gone 24 days without rain (1 mm or more) when it started. Rain came after the fire: 20.4 mm on 12 Aug.

This area had burned before

72% of the perimeter overlaps earlier fires recorded since 2016: 714 ha in 2016, 2,920 ha in 2017, 1,882 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 3,972 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 3.5% of the area of London (55 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Villa Hayes where it started
    5,472 ha reached on 2 Aug
    0.3 %
  2. 0 ha reached on 10 Aug
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
2 Aug 33.7 °C 26 % 40 km/h 0.0 mm High 35
3 Aug 33.6 °C 25 % 34 km/h 0.0 mm High 32
4 Aug 33.2 °C 23 % 45 km/h 0.0 mm Very high 43
5 Aug 33.4 °C 21 % 45 km/h 0.0 mm Very high 46
6 Aug 33.9 °C 20 % 39 km/h 0.0 mm Very high 41
7 Aug 33.9 °C 20 % 39 km/h 0.0 mm Very high 44
8 Aug 33.7 °C 20 % 33 km/h 0.0 mm Very high 41
9 Aug 34.2 °C 19 % 36 km/h 0.0 mm Very high 42
10 Aug 35.4 °C 20 % 41 km/h 0.0 mm Very high 49
11 Aug 33.8 °C 24 % 46 km/h 0.0 mm High 35
12 Aug after 20.2 °C 44 % 39 km/h 20.4 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 34.9, a minimum humidity of 26% and 24 days without rain. Fires in the area that started in weather like this since 2016: 64.

FWI at the start 34.9
Minimum humidity 26 %
Days without rain 24
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Santa Rosa Del Aguaray fire, July 2017
2,490 ha 5 days FWI 34.1 Min. humidity 27 % 150 km away, in 2017

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

5 days
median duration
2,314 ha
median area
100 %
went past 1,000 ha
3.9 mm
rain at the end (median; 52 of 64 had it)

It was 2.4 times larger than the median of its twins and lasted 10 days, against 5 days.

Only 4 of its 64 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 12 of 64, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.9 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

20.4 mmfirst rain
12 Augthe day after it ended
46km/h · max. gust

It was considered over on 11 Aug, and on 12 Aug 20.4 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 52 of 64, with a median of 3.9 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 26 Jul 2020
After · 18 Aug 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 263Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Paraguay

Frequently asked questions

How long did the Villa Hayes fire last?
GWIS (Copernicus) dates it between 2 August 2020 and 11 August 2020: 10 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 5,488 hectares (54.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Villa Hayes (5,472 ha, 0.3 %); Concepcion (0 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 35.4 °C, humidity dropped to 19 % and gusts hit 46 km/h. The fire danger index (FWI) reached 49, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Paraguay (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 64. Their median duration was 5 days and their median area 2,314 ha; 100 % went past 1,000 ha. Only 4 of its 64 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 12 of 64, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.9 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 132 · 911 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 132 · 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 263 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.