Skip to content
worldfires
MX · Mexico · –

Villa de Álvarez fire, May 2024 Villa de Álvarez, Minatitlán, Coquimatlán

Out · last detection 13 Jun 2024, 20:58 UTC

The fire started on 26 May 2024 in Villa de Álvarez, Mexico, and satellites saw it burning for 19 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 4,208 hectares from heat detections, spread across 3 municipalities.

Number 68 in Mexico in 2024, of 289.

Burnt area
4,208ha
GWIS perimeter (Copernicus)
Duration
19days
26 May 2024 – 13 Jun 2024
Municipalities hit
3
municipalities
Started on
26 May
2024
Heat detections
291
in a single hotspot: 92 MW
Danger at start
32
High · FWI index
Average daily power
80MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 26 May13 Jun
13 Jun 2024

How it evolved, day by day

26 May 2024 · 103 MW · 6 27 May 2024 · 208 MW · 21 28 May 2024 · 113 MW · 13 29 May 2024 · 146 MW · 16 30 May 2024 · 87 MW · 28 31 May 2024 · 55 MW · 17 1 Jun 2024 · 39 MW · 6 2 Jun 2024 · 27 MW · 7 3 Jun 2024 · 24 MW · 9 4 Jun 2024 · 66 MW · 17 5 Jun 2024 · 105 MW · 26 6 Jun 2024 · 150 MW · 34 7 Jun 2024 · 46 MW · 19 9 Jun 2024 · 154 MW · 36 10 Jun 2024 · 43 MW · 10 11 Jun 2024 · 18 MW · 4 12 Jun 2024 · 16 MW · 10 13 Jun 2024 · 29 MW · 12
27 May 30 May 3 Jun 7 Jun 12 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
45km/h · peak gust
23%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 4.0 mm on 14 Jun.

This area had burned before

13% of the perimeter overlaps earlier fires recorded since 2016: 433 ha in 2016, 231 ha in 2022. Part of it burned more than once, so the yearly figures add up to more than the 564 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.7% of the area of London (42 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Villa de Álvarez where it started
    2,461 ha reached on 26 May
    8.5 %
  2. Minatitlán 10,231 inhabitants
    1,241 ha reached on 30 May
    3.0 %
  3. Coquimatlán 20,837 inhabitants
    668 ha reached on 9 Jun
    1.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

Official record

According to CONAFOR, this fire started on 26 May 2024 and burned 2,678 ha (the satellite measured 4,208 ha). The two figures differ a lot, so these may not be exactly the same fire: take them as nearby records.

CONAFOR (Comisión Nacional Forestal), estadística de incendios forestales en datos.gob.mx (CC BY 4.0). This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 25 % of the area in Mexico

Day High Min. humidity Peak gust Rain Danger (FWI)
26 May 27.9 °C 39 % 41 km/h 0.0 mm High 32
27 May 29.2 °C 23 % 40 km/h 0.0 mm Very high 42
28 May 29.9 °C 25 % 40 km/h 0.0 mm Very high 41
29 May 30.1 °C 34 % 43 km/h 0.0 mm Very high 39
30 May 29.2 °C 37 % 43 km/h 0.0 mm Very high 40
31 May 29.9 °C 34 % 40 km/h 0.0 mm Very high 38
1 Jun 29.6 °C 31 % 39 km/h 0.0 mm Very high 39
2 Jun 29.4 °C 42 % 39 km/h 0.0 mm High 36
3 Jun 27.9 °C 46 % 42 km/h 0.0 mm High 34
4 Jun 27.8 °C 37 % 42 km/h 0.0 mm High 34
5 Jun 27.2 °C 48 % 42 km/h 0.0 mm High 32
6 Jun 27.5 °C 53 % 41 km/h 0.0 mm High 28
7 Jun 27.2 °C 53 % 39 km/h 0.0 mm High 27
8 Jun 28.5 °C 45 % 42 km/h 0.0 mm High 27
9 Jun 27.1 °C 42 % 44 km/h 0.0 mm High 30
10 Jun 28.2 °C 54 % 44 km/h 0.0 mm High 29
11 Jun 25.5 °C 63 % 36 km/h 0.7 mm Moderate 20
12 Jun 27.5 °C 56 % 37 km/h 0.8 mm High 23
13 Jun 29.0 °C 45 % 45 km/h 0.5 mm High 30
14 Jun after 28.0 °C 55 % 41 km/h 4.0 mm Moderate 20

Its twins: fires that started in the same weather

It started with an FWI of 32.5, a minimum humidity of 39% and more than two months without rain. Fires in the area that started in weather like this since 2016: 27.

FWI at the start 32.5
Minimum humidity 39 %
Days without rain 60+
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Cuautitlán de García Barragán fire, May 2020
2,327 ha 21 days FWI 32.1 Min. humidity 40 % 22 km away, in 2020

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

14 days
median duration
2,382 ha
median area
100 %
went past 1,000 ha
3.3 mm
rain at the end (median; 9 of 27 had it)

It was 1.8 times larger than the median of its twins and lasted 19 days, against 14 days.

Only 5 of its 27 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 18 of 27, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

4.0 mmfirst rain
14 Junthe day after it ended
45km/h · max. gust

It was considered over on 13 Jun, and on 14 Jun 4.0 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 9 of 27, with a median of 3.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 19 May 2024
After · 20 Jun 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 30 May 2024 the air beside the fire reached 52 µg/m³ of PM2.5. That day averaged 32: 2.1 times the WHO daily guideline (15).

PM2.5 peak52 µg/m³
Days over the guideline17 days
PM1076 µg/m³
Optical depth1.11
24 May29 May3 Jun8 Jun13 Jun
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 291Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Mexico

Frequently asked questions

How long did the Villa de Álvarez fire last?
GWIS (Copernicus) dates it between 26 May 2024 and 13 June 2024: 19 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 4,208 hectares (42.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Villa de Álvarez (2,461 ha, 8.5 %); Minatitlán (1,241 ha, 3.0 %); Coquimatlán (668 ha, 1.3 %).
What was the weather like?
During the fire the temperature reached 30.1 °C, humidity dropped to 23 % and gusts hit 45 km/h. The fire danger index (FWI) reached 42, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Mexico (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 27. Their median duration was 14 days and their median area 2,382 ha; 100 % went past 1,000 ha. Only 5 of its 27 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 18 of 27, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 4,348 → 4,208 ha.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 291 Suomi-NPP VIIRS detections on those dates.
  • Compared with CONAFOR: 2,678 official ha against 4,208 ha of perimeter; similar, but with reservations.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.