Skip to content
worldfires
AU · Australia · –

Victoria Daly fire, 4 September 2023 Victoria Daly, Central Desert

Out · last detection

The fire started on in Victoria Daly, Australia, and satellites saw it burning for 23 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 38,052 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
38,052ha
GWIS perimeter (Copernicus)
Duration
23days
4 Sept 2023 – 26 Sept 2023
Municipalities hit
2
local government areas
Started on
4 Sept
2023
Heat detections
1,928
in a single hotspot: 220 MW
Danger at start
52
Extreme · FWI index
Average daily power
592MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 4 Sept26 Sept
26 Sept 2023

How it evolved, day by day

4 Sept 2023 · 755 MW · 68 5 Sept 2023 · 849 MW · 62 6 Sept 2023 · 55 MW · 9 7 Sept 2023 · 362 MW · 70 8 Sept 2023 · 414 MW · 124 9 Sept 2023 · 749 MW · 154 10 Sept 2023 · 633 MW · 177 11 Sept 2023 · 479 MW · 150 12 Sept 2023 · 700 MW · 113 13 Sept 2023 · 485 MW · 134 14 Sept 2023 · 484 MW · 123 15 Sept 2023 · 571 MW · 136 16 Sept 2023 · 315 MW · 93 17 Sept 2023 · 366 MW · 99 18 Sept 2023 · 361 MW · 73 19 Sept 2023 · 230 MW · 54 20 Sept 2023 · 1,144 MW · 99 21 Sept 2023 · 117 MW · 28 22 Sept 2023 · 161 MW · 17 23 Sept 2023 · 95 MW · 16 24 Sept 2023 · 4,065 MW · 93 25 Sept 2023 · 132 MW · 15 26 Sept 2023 · 93 MW · 21
4 Sept 9 Sept 14 Sept 19 Sept 24 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
59km/h · peak gust
6%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

22% of the perimeter overlaps earlier fires recorded since 2016: 1,083 ha in 2016, 6,949 ha in 2017, 258 ha in 2018, 145 ha in 2021.

How big is it?

10 km
It burned the equivalent of 24% of the area of London (381 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Victoria Daly where it started
    28,605 ha
    0.2 %
  2. 9,835 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
4 Sept 33.9 °C 17 % 24 km/h 0.0 mm Extreme 52
5 Sept 34.2 °C 19 % 29 km/h 0.0 mm Extreme 57
6 Sept 33.8 °C 16 % 38 km/h 0.0 mm Extreme 64
7 Sept 34.8 °C 18 % 42 km/h 0.0 mm Extreme 69
8 Sept 32.9 °C 18 % 59 km/h 0.0 mm Very extreme 98
9 Sept 32.6 °C 14 % 46 km/h 0.0 mm Very extreme 83
10 Sept 33.2 °C 13 % 43 km/h 0.0 mm Very extreme 80
11 Sept 33.0 °C 11 % 45 km/h 0.0 mm Very extreme 94
12 Sept 30.4 °C 8 % 51 km/h 0.0 mm Very extreme 102
13 Sept 31.9 °C 12 % 50 km/h 0.0 mm Very extreme 103
14 Sept 32.3 °C 17 % 37 km/h 0.0 mm Extreme 69
15 Sept 33.0 °C 18 % 41 km/h 0.0 mm Very extreme 80
16 Sept 32.8 °C 15 % 42 km/h 0.0 mm Very extreme 84
17 Sept 33.3 °C 16 % 36 km/h 0.0 mm Very extreme 74
18 Sept 33.7 °C 15 % 36 km/h 0.0 mm Extreme 65
19 Sept 34.0 °C 15 % 41 km/h 0.0 mm Extreme 66
20 Sept 35.6 °C 15 % 38 km/h 0.0 mm Extreme 62
21 Sept 36.6 °C 15 % 38 km/h 0.0 mm Extreme 68
22 Sept 36.3 °C 9 % 52 km/h 0.0 mm Very extreme 106
23 Sept 34.8 °C 9 % 42 km/h 0.0 mm Very extreme 86
24 Sept 35.9 °C 6 % 44 km/h 0.0 mm Very extreme 92
25 Sept 36.6 °C 12 % 34 km/h 0.0 mm Very extreme 81
26 Sept 37.3 °C 14 % 36 km/h 0.0 mm Very extreme 83
27 Sept after 36.9 °C 14 % 33 km/h 0.0 mm Very extreme 74
28 Sept after 36.2 °C 16 % 45 km/h 0.0 mm Very extreme 96
29 Sept after 36.0 °C 13 % 45 km/h 0.0 mm Very extreme 92
30 Sept after 36.2 °C 15 % 36 km/h 0.0 mm Extreme 69
1 Oct after 37.0 °C 18 % 46 km/h 0.0 mm Very extreme 81
2 Oct after 37.6 °C 19 % 30 km/h 0.0 mm Extreme 59
3 Oct after 36.8 °C 23 % 27 km/h 0.0 mm Extreme 52
4 Oct after 37.5 °C 13 % 60 km/h 0.0 mm Very extreme 124
5 Oct after 33.6 °C 15 % 54 km/h 0.0 mm Very extreme 102
6 Oct after 33.9 °C 13 % 50 km/h 0.0 mm Very extreme 94

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 28 Aug 2023
After · 3 Oct 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 8 September 2023 the air beside the fire reached 52 µg/m³ of PM2.5. That day averaged 17: 1.2 times the WHO daily guideline (15).

PM2.5 peak52 µg/m³
Days over the guideline2 days
PM1075 µg/m³
Optical depth0.88
3 Sept8 Sept13 Sept18 Sept23 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1,928Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Victoria Daly fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 4 September 2023 to 26 September 2023 (23 days). The perimeter dates it from 5 September 2023 to 23 September 2023.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 38,052 hectares (380.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Victoria Daly (28,605 ha, 0.2 %); Central Desert (9,835 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 37.3 °C, humidity dropped to 6 % and gusts hit 59 km/h. The fire danger index (FWI) reached 106, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 23 September 2023 → 26 September 2023.
  2. Start date: 5 September 2023 → 4 September 2023.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 5 September 2023 to 23 September 2023. 1,928 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.