Skip to content
worldfires
AU · Australia · –

Victoria Daly fire, 26 August 2020 Victoria Daly, Unincorporated NT

Out · last detection 16 Sept 2020, 04:08 UTC

The fire started on 26 August 2020 in Victoria Daly, Australia, and satellites saw it burning for 22 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 74,838 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
74,838ha
GWIS perimeter (Copernicus)
Duration
22days
26 Aug 2020 – 16 Sept 2020
Municipalities hit
2
local government areas
Started on
26 Aug
2020
Heat detections
2,308
in a single hotspot: 370 MW
Danger at start
84
Very extreme · FWI index
Average daily power
1.1GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 26 Aug16 Sept
16 Sept 2020

How it evolved, day by day

26 Aug 2020 · 3 MW · 2 27 Aug 2020 · 1,590 MW · 214 28 Aug 2020 · 6,865 MW · 376 29 Aug 2020 · 3,818 MW · 432 30 Aug 2020 · 4,621 MW · 370 31 Aug 2020 · 191 MW · 49 1 Sept 2020 · 378 MW · 84 2 Sept 2020 · 263 MW · 48 3 Sept 2020 · 52 MW · 10 4 Sept 2020 · 773 MW · 20 5 Sept 2020 · 135 MW · 25 6 Sept 2020 · 602 MW · 77 7 Sept 2020 · 764 MW · 78 8 Sept 2020 · 946 MW · 88 9 Sept 2020 · 1,842 MW · 188 10 Sept 2020 · 722 MW · 92 11 Sept 2020 · 339 MW · 45 12 Sept 2020 · 213 MW · 59 13 Sept 2020 · 112 MW · 9 14 Sept 2020 · 473 MW · 36 15 Sept 2020 · 8 MW · 5 16 Sept 2020 · 10 MW · 1
28 Aug 5 Sept 10 Sept 15 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

37°high
56km/h · peak gust
7%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

93% of the perimeter overlaps earlier fires recorded since 2016: 24,577 ha in 2016, 16,144 ha in 2017, 43,936 ha in 2018, 41,582 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 69,333 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 47% of the area of London (748 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Victoria Daly where it started
    74,950 ha
    0.5 %
  2. 35 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Very dry air: 28 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
26 Aug 34.8 °C 10 % 49 km/h 0.0 mm Very extreme 84
27 Aug 35.4 °C 7 % 56 km/h 0.0 mm Very extreme 96
28 Aug 34.2 °C 9 % 56 km/h 0.0 mm Very extreme 95
29 Aug 32.9 °C 18 % 46 km/h 0.0 mm Very extreme 71
30 Aug 34.1 °C 23 % 39 km/h 0.0 mm Extreme 63
31 Aug 35.7 °C 30 % 52 km/h 0.0 mm Extreme 69
1 Sept 35.5 °C 24 % 44 km/h 0.0 mm Extreme 62
2 Sept 35.5 °C 25 % 27 km/h 0.0 mm Very high 40
3 Sept 36.1 °C 25 % 29 km/h 0.0 mm Very high 39
4 Sept 36.8 °C 17 % 32 km/h 0.0 mm Very high 39
5 Sept 36.4 °C 16 % 40 km/h 0.0 mm Extreme 61
6 Sept 36.2 °C 15 % 55 km/h 0.0 mm Very extreme 91
7 Sept 35.7 °C 17 % 50 km/h 0.0 mm Very extreme 79
8 Sept 36.5 °C 13 % 50 km/h 0.0 mm Very extreme 84
9 Sept 35.7 °C 17 % 40 km/h 0.0 mm Very extreme 71
10 Sept 35.0 °C 17 % 37 km/h 0.0 mm Extreme 66
11 Sept 35.5 °C 17 % 44 km/h 0.0 mm Extreme 68
12 Sept 35.9 °C 13 % 42 km/h 0.0 mm Extreme 65
13 Sept 35.1 °C 19 % 35 km/h 0.0 mm Extreme 56
14 Sept 35.3 °C 17 % 46 km/h 0.0 mm Very extreme 71
15 Sept 35.2 °C 20 % 47 km/h 0.0 mm Very extreme 74
16 Sept 35.3 °C 20 % 31 km/h 0.0 mm Extreme 55
17 Sept after 35.6 °C 27 % 31 km/h 0.0 mm Very high 39
18 Sept after 35.2 °C 33 % 25 km/h 0.0 mm High 34
19 Sept after 34.8 °C 42 % 30 km/h 0.1 mm High 29
20 Sept after 36.3 °C 40 % 30 km/h 0.5 mm High 24
21 Sept after 37.5 °C 35 % 27 km/h 0.0 mm High 28
22 Sept after 37.7 °C 28 % 27 km/h 0.0 mm High 30
23 Sept after 37.3 °C 30 % 26 km/h 0.4 mm High 37
24 Sept after 36.4 °C 33 % 30 km/h 0.0 mm High 34
25 Sept after 36.2 °C 33 % 33 km/h 0.3 mm High 32
26 Sept after 36.2 °C 33 % 27 km/h 0.0 mm High 27

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 19 Aug 2020
After · 23 Sept 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 2,308Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Victoria Daly fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 26 August 2020 to 16 September 2020 (22 days). The perimeter dates it from 26 August 2020 to 13 September 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 74,838 hectares (748.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Victoria Daly (74,950 ha, 0.5 %); Unincorporated NT (35 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 36.8 °C, humidity dropped to 7 % and gusts hit 56 km/h. The fire danger index (FWI) reached 96, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 13 September 2020 → 16 September 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 26 August 2020 to 13 September 2020. 2,308 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.