Skip to content
worldfires
AU · Australia · –

Victoria Daly fire, 4 November 2019 Victoria Daly

Out · last detection

The fire started on in Victoria Daly, Australia, and satellites saw it burning for 21 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 17,227 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
17,227ha
GWIS perimeter (Copernicus)
Duration
21days
4 Nov 2019 – 24 Nov 2019
Municipalities hit
1
local government areas
Started on
4 Nov
2019
Heat detections
767
in a single hotspot: 73 MW
Danger at start
50
Extreme · FWI index
Average daily power
404MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 4 Nov24 Nov
24 Nov 2019

How it evolved, day by day

6 Nov 2019 · 165 MW · 24 7 Nov 2019 · 139 MW · 26 8 Nov 2019 · 391 MW · 31 9 Nov 2019 · 189 MW · 21 10 Nov 2019 · 187 MW · 29 11 Nov 2019 · 362 MW · 57 12 Nov 2019 · 1,405 MW · 173 13 Nov 2019 · 1,246 MW · 59 14 Nov 2019 · 272 MW · 22 15 Nov 2019 · 42 MW · 7 16 Nov 2019 · 148 MW · 19 17 Nov 2019 · 789 MW · 83 18 Nov 2019 · 398 MW · 31 19 Nov 2019 · 322 MW · 22 20 Nov 2019 · 840 MW · 85 21 Nov 2019 · 235 MW · 33 22 Nov 2019 · 110 MW · 18 23 Nov 2019 · 19 MW · 2 24 Nov 2019 · 418 MW · 25
6 Nov 12 Nov 18 Nov 22 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

42°high
49km/h · peak gust
3%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 1.4 mm on 26 Nov.

This area had burned before

62% of the perimeter overlaps earlier fires recorded since 2016: 6,136 ha in 2016, 831 ha in 2017, 5,409 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 10,748 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 11% of the area of London (172 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Victoria Daly where it started
    17,388 ha
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
4 Nov 37.6 °C 28 % 36 km/h 2.9 mm Extreme 50
5 Nov 36.3 °C 21 % 49 km/h 1.5 mm Very high 40
6 Nov 39.0 °C 5 % 49 km/h 0.0 mm Very extreme 83
7 Nov 39.5 °C 7 % 46 km/h 0.0 mm Very extreme 82
8 Nov 41.0 °C 6 % 32 km/h 0.0 mm Very high 47
9 Nov 40.6 °C 10 % 39 km/h 0.0 mm Extreme 55
10 Nov 38.9 °C 18 % 32 km/h 0.0 mm Very high 48
11 Nov 39.7 °C 16 % 37 km/h 0.0 mm Extreme 54
12 Nov 40.4 °C 10 % 36 km/h 0.0 mm Extreme 58
13 Nov 40.5 °C 13 % 35 km/h 0.0 mm Extreme 57
14 Nov 39.9 °C 12 % 38 km/h 0.0 mm Extreme 68
15 Nov 41.5 °C 6 % 38 km/h 0.0 mm Very extreme 77
16 Nov 40.7 °C 7 % 35 km/h 0.0 mm Extreme 60
17 Nov 40.6 °C 3 % 44 km/h 0.0 mm Very extreme 94
18 Nov 40.3 °C 12 % 33 km/h 0.0 mm Extreme 60
19 Nov 40.1 °C 12 % 35 km/h 0.0 mm Extreme 52
20 Nov 40.5 °C 15 % 42 km/h 0.0 mm Extreme 61
21 Nov 41.3 °C 15 % 49 km/h 1.3 mm Very extreme 70
22 Nov 41.3 °C 16 % 43 km/h 0.0 mm Extreme 57
23 Nov 39.1 °C 20 % 42 km/h 3.1 mm Very high 50
24 Nov 36.7 °C 21 % 34 km/h 2.0 mm Moderate 14
25 Nov after 31.1 °C 41 % 32 km/h 0.3 mm Moderate 19
26 Nov after 36.8 °C 24 % 25 km/h 1.4 mm High 32

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 28 Oct 2019
After · 1 Dec 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 767Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Victoria Daly fire last?
GWIS (Copernicus) dates it between 4 November 2019 and 24 November 2019: 21 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 17,227 hectares (172.3 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Victoria Daly (17,388 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 41.5 °C, humidity dropped to 3 % and gusts hit 49 km/h. The fire danger index (FWI) reached 94, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 767 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.