Skip to content
worldfires
AU · Australia · –

Victoria Daly fire, 28 July 2019 Victoria Daly

Out · last detection 24 Aug 2019, 16:50 UTC

The fire started on 28 July 2019 in Victoria Daly, Australia, and satellites saw it burning for 28 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 45,077 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
45,077ha
GWIS perimeter (Copernicus)
Duration
28days
28 Jul 2019 – 24 Aug 2019
Municipalities hit
1
local government areas
Started on
28 Jul
2019
Heat detections
1,590
in a single hotspot: 173 MW
Danger at start
49
Very high · FWI index
Average daily power
450MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 28 Jul24 Aug
24 Aug 2019

How it evolved, day by day

28 Jul 2019 · 6 MW · 1 29 Jul 2019 · 1,201 MW · 64 30 Jul 2019 · 1,794 MW · 158 31 Jul 2019 · 1,494 MW · 170 1 Aug 2019 · 299 MW · 92 2 Aug 2019 · 425 MW · 93 3 Aug 2019 · 363 MW · 90 4 Aug 2019 · 348 MW · 89 5 Aug 2019 · 183 MW · 67 6 Aug 2019 · 1,145 MW · 81 7 Aug 2019 · 165 MW · 48 8 Aug 2019 · 1,196 MW · 99 9 Aug 2019 · 864 MW · 80 10 Aug 2019 · 959 MW · 81 11 Aug 2019 · 237 MW · 60 12 Aug 2019 · 169 MW · 55 13 Aug 2019 · 151 MW · 38 14 Aug 2019 · 46 MW · 23 15 Aug 2019 · 73 MW · 21 16 Aug 2019 · 317 MW · 50 17 Aug 2019 · 402 MW · 42 18 Aug 2019 · 96 MW · 27 19 Aug 2019 · 67 MW · 18 20 Aug 2019 · 50 MW · 12 21 Aug 2019 · 53 MW · 13 22 Aug 2019 · 47 MW · 17 24 Aug 2019 · 1 MW · 1
30 Jul 9 Aug 15 Aug 21 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

35°high
50km/h · peak gust
5%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

56% of the perimeter overlaps earlier fires recorded since 2016: 10,103 ha in 2016, 8,424 ha in 2017, 12,775 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 25,277 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 28% of the area of London (451 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Victoria Daly where it started
    45,200 ha
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
28 Jul 32.3 °C 21 % 36 km/h 0.0 mm Very high 49
29 Jul 32.0 °C 24 % 29 km/h 0.0 mm Very high 44
30 Jul 32.7 °C 20 % 30 km/h 0.0 mm Very high 44
31 Jul 32.5 °C 18 % 42 km/h 0.0 mm Extreme 62
1 Aug 31.3 °C 13 % 48 km/h 0.0 mm Extreme 69
2 Aug 27.5 °C 10 % 47 km/h 0.0 mm Very extreme 76
3 Aug 29.3 °C 15 % 42 km/h 0.0 mm Very extreme 70
4 Aug 30.4 °C 21 % 48 km/h 0.0 mm Very extreme 72
5 Aug 31.7 °C 21 % 36 km/h 0.0 mm Extreme 58
6 Aug 32.1 °C 23 % 34 km/h 0.0 mm Extreme 54
7 Aug 33.1 °C 21 % 26 km/h 0.0 mm Very high 43
8 Aug 33.2 °C 23 % 22 km/h 0.0 mm High 38
9 Aug 33.6 °C 22 % 35 km/h 0.0 mm Extreme 53
10 Aug 32.9 °C 13 % 38 km/h 0.0 mm Extreme 67
11 Aug 31.1 °C 11 % 47 km/h 0.0 mm Very extreme 86
12 Aug 28.9 °C 6 % 46 km/h 0.0 mm Very extreme 82
13 Aug 27.8 °C 8 % 44 km/h 0.0 mm Very extreme 78
14 Aug 29.2 °C 5 % 41 km/h 0.0 mm Very extreme 74
15 Aug 31.1 °C 19 % 32 km/h 0.0 mm Extreme 56
16 Aug 32.5 °C 26 % 30 km/h 0.0 mm Extreme 50
17 Aug 34.3 °C 19 % 21 km/h 0.0 mm Very high 43
18 Aug 35.2 °C 11 % 34 km/h 0.0 mm Very extreme 75
19 Aug 33.6 °C 15 % 48 km/h 0.0 mm Extreme 69
20 Aug 28.4 °C 12 % 50 km/h 0.0 mm Very extreme 83
21 Aug 28.7 °C 10 % 48 km/h 0.0 mm Very extreme 84
22 Aug 31.0 °C 8 % 42 km/h 0.0 mm Very extreme 78
23 Aug 32.2 °C 12 % 35 km/h 0.0 mm Extreme 64
24 Aug 33.5 °C 8 % 29 km/h 0.0 mm Extreme 58
25 Aug after 32.9 °C 16 % 34 km/h 0.0 mm Extreme 56
26 Aug after 32.7 °C 18 % 36 km/h 0.0 mm Extreme 63
27 Aug after 32.8 °C 7 % 46 km/h 0.0 mm Very extreme 83
28 Aug after 33.8 °C 6 % 53 km/h 0.0 mm Very extreme 102
29 Aug after 29.4 °C 3 % 48 km/h 0.0 mm Very extreme 91
30 Aug after 30.7 °C 3 % 45 km/h 0.0 mm Very extreme 86
31 Aug after 32.6 °C 4 % 35 km/h 0.0 mm Very extreme 76
1 Sept after 33.3 °C 9 % 33 km/h 0.0 mm Extreme 68
2 Sept after 33.8 °C 11 % 34 km/h 0.0 mm Extreme 69
3 Sept after 34.5 °C 11 % 35 km/h 0.0 mm Extreme 68

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 21 Jul 2019
After · 31 Aug 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,590Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Victoria Daly fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 28 July 2019 to 24 August 2019 (28 days). The perimeter dates it from 29 July 2019 to 24 August 2019.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 45,077 hectares (450.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Victoria Daly (45,200 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 35.2 °C, humidity dropped to 5 % and gusts hit 50 km/h. The fire danger index (FWI) reached 86, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 29 July 2019 → 28 July 2019.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 29 July 2019 to 24 August 2019. 1,590 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.