Skip to content
worldfires
AU · Australia · –

Victoria Daly fire, 24 July 2019 Victoria Daly

Out · last detection

The fire started on in Victoria Daly, Australia, and satellites saw it burning for 38 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 118,044 hectares from heat detections, spread across a single municipality.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
118,044ha
GWIS perimeter (Copernicus)
Duration
38days
24 Jul 2019 – 30 Aug 2019
Municipalities hit
1
local government areas
Started on
24 Jul
2019
Heat detections
4,987
in a single hotspot: 228 MW
Danger at start
110
Very extreme · FWI index
Average daily power
785MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 24 Jul30 Aug
30 Aug 2019

How it evolved, day by day

24 Jul 2019 · 131 MW · 22 25 Jul 2019 · 127 MW · 32 26 Jul 2019 · 315 MW · 40 27 Jul 2019 · 1,266 MW · 142 28 Jul 2019 · 830 MW · 158 29 Jul 2019 · 600 MW · 170 30 Jul 2019 · 790 MW · 160 31 Jul 2019 · 6,008 MW · 338 1 Aug 2019 · 1,825 MW · 346 2 Aug 2019 · 733 MW · 213 3 Aug 2019 · 1,517 MW · 330 4 Aug 2019 · 1,682 MW · 301 5 Aug 2019 · 866 MW · 215 6 Aug 2019 · 2,362 MW · 343 7 Aug 2019 · 1,291 MW · 240 8 Aug 2019 · 1,659 MW · 241 9 Aug 2019 · 891 MW · 184 10 Aug 2019 · 764 MW · 210 11 Aug 2019 · 735 MW · 219 12 Aug 2019 · 509 MW · 165 13 Aug 2019 · 320 MW · 93 14 Aug 2019 · 445 MW · 132 15 Aug 2019 · 509 MW · 74 16 Aug 2019 · 797 MW · 66 17 Aug 2019 · 160 MW · 27 18 Aug 2019 · 401 MW · 77 19 Aug 2019 · 1,042 MW · 140 20 Aug 2019 · 491 MW · 92 21 Aug 2019 · 147 MW · 47 22 Aug 2019 · 152 MW · 38 23 Aug 2019 · 75 MW · 23 24 Aug 2019 · 39 MW · 14 25 Aug 2019 · 20 MW · 4 26 Aug 2019 · 35 MW · 10 27 Aug 2019 · 70 MW · 33 28 Aug 2019 · 92 MW · 30 29 Aug 2019 · 123 MW · 16 30 Aug 2019 · 10 MW · 2
24 Jul 31 Jul 9 Aug 17 Aug 25 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
58km/h · peak gust
2%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

64% of the perimeter overlaps earlier fires recorded since 2016: 2,755 ha in 2016, 73,005 ha in 2017, 4,041 ha in 2018. Part of it burned more than once, so the yearly figures add up to more than the 75,673 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 75% of the area of London (1,180 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Victoria Daly where it started
    118,522 ha
    0.8 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area3.1 ha
Residents≈ 40

Inside the perimeter there were about 3.1 hectares of built-up land and about 40 residents (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Strong wind: 39 % of the area in Australia Very dry air: 28 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
24 Jul 33.1 °C 6 % 52 km/h 0.0 mm Very extreme 110
25 Jul 32.4 °C 16 % 31 km/h 0.0 mm Extreme 55
26 Jul 32.6 °C 18 % 35 km/h 0.0 mm Extreme 56
27 Jul 32.8 °C 20 % 30 km/h 0.0 mm Very high 45
28 Jul 33.9 °C 17 % 31 km/h 0.0 mm Very high 46
29 Jul 33.6 °C 19 % 28 km/h 0.0 mm Very high 47
30 Jul 34.1 °C 16 % 29 km/h 0.0 mm Very high 44
31 Jul 33.9 °C 14 % 40 km/h 0.0 mm Extreme 64
1 Aug 32.6 °C 12 % 46 km/h 0.0 mm Very extreme 75
2 Aug 27.9 °C 9 % 49 km/h 0.0 mm Very extreme 91
3 Aug 30.2 °C 12 % 44 km/h 0.0 mm Very extreme 79
4 Aug 31.4 °C 18 % 45 km/h 0.0 mm Very extreme 76
5 Aug 32.6 °C 17 % 34 km/h 0.0 mm Extreme 64
6 Aug 33.4 °C 17 % 32 km/h 0.0 mm Extreme 56
7 Aug 33.8 °C 20 % 23 km/h 0.0 mm Very high 45
8 Aug 34.3 °C 20 % 23 km/h 0.0 mm High 37
9 Aug 34.9 °C 20 % 40 km/h 0.0 mm Extreme 57
10 Aug 34.0 °C 11 % 40 km/h 0.0 mm Very extreme 76
11 Aug 32.4 °C 10 % 46 km/h 0.0 mm Very extreme 95
12 Aug 30.1 °C 6 % 46 km/h 0.0 mm Very extreme 91
13 Aug 28.8 °C 6 % 45 km/h 0.0 mm Very extreme 88
14 Aug 30.6 °C 2 % 40 km/h 0.0 mm Very extreme 81
15 Aug 31.8 °C 13 % 30 km/h 0.0 mm Extreme 59
16 Aug 33.6 °C 19 % 27 km/h 0.0 mm Extreme 54
17 Aug 34.8 °C 15 % 23 km/h 0.0 mm Very high 47
18 Aug 35.8 °C 10 % 40 km/h 0.0 mm Very extreme 96
19 Aug 34.9 °C 14 % 58 km/h 0.0 mm Very extreme 107
20 Aug 28.6 °C 11 % 52 km/h 0.0 mm Very extreme 100
21 Aug 29.1 °C 9 % 50 km/h 0.0 mm Very extreme 96
22 Aug 32.2 °C 6 % 39 km/h 0.0 mm Very extreme 81
23 Aug 33.9 °C 7 % 32 km/h 0.0 mm Extreme 66
24 Aug 34.5 °C 6 % 28 km/h 0.0 mm Extreme 63
25 Aug 34.4 °C 12 % 33 km/h 0.0 mm Extreme 59
26 Aug 33.9 °C 14 % 35 km/h 0.0 mm Extreme 65
27 Aug 34.1 °C 5 % 43 km/h 0.0 mm Very extreme 91
28 Aug 35.0 °C 6 % 53 km/h 0.0 mm Very extreme 108
29 Aug 30.4 °C 3 % 48 km/h 0.0 mm Very extreme 100
30 Aug 32.1 °C 2 % 41 km/h 0.0 mm Very extreme 90
31 Aug after 34.0 °C 3 % 36 km/h 0.0 mm Very extreme 81
1 Sept after 34.7 °C 7 % 30 km/h 0.0 mm Extreme 68
2 Sept after 35.5 °C 10 % 30 km/h 0.0 mm Extreme 67
3 Sept after 36.0 °C 10 % 30 km/h 0.0 mm Extreme 61
4 Sept after 36.4 °C 16 % 26 km/h 0.0 mm Very high 47
5 Sept after 35.5 °C 20 % 28 km/h 0.0 mm Very high 42
6 Sept after 37.1 °C 15 % 25 km/h 0.0 mm Very high 44
7 Sept after 36.9 °C 16 % 30 km/h 0.0 mm Very high 40
8 Sept after 37.0 °C 13 % 32 km/h 0.0 mm Very high 48
9 Sept after 36.1 °C 3 % 53 km/h 0.0 mm Very extreme 115

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 17 Jul 2019
After · 6 Sept 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 4,987Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Victoria Daly fire last?
GWIS (Copernicus) dates it between 24 July 2019 and 30 August 2019: 38 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 118,044 hectares (1,180.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Victoria Daly (118,522 ha, 0.8 %).
What was the weather like?
During the fire the temperature reached 35.8 °C, humidity dropped to 2 % and gusts hit 58 km/h. The fire danger index (FWI) reached 110, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 4,987 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.