Skip to content
worldfires
AU · Australia · –

Victoria Daly fire, 12 September 2018 Victoria Daly

Out · last detection

The fire started on in Victoria Daly, Australia, and satellites saw it burning for 32 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 182,393 hectares from heat detections, spread across a single municipality.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
182,393ha
GWIS perimeter (Copernicus)
Duration
32days
12 Sept 2018 – 13 Oct 2018
Municipalities hit
1
local government areas
Started on
12 Sept
2018
Heat detections
6,395
in a single hotspot: 225 MW
Danger at start
83
Very extreme · FWI index
Average daily power
2.0GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Sept13 Oct
13 Oct 2018

How it evolved, day by day

12 Sept 2018 · 143 MW · 18 13 Sept 2018 · 59 MW · 9 14 Sept 2018 · 178 MW · 15 15 Sept 2018 · 55 MW · 12 16 Sept 2018 · 87 MW · 22 17 Sept 2018 · 1,630 MW · 163 18 Sept 2018 · 1,217 MW · 148 19 Sept 2018 · 1,248 MW · 245 20 Sept 2018 · 3,755 MW · 430 21 Sept 2018 · 2,335 MW · 308 22 Sept 2018 · 5,103 MW · 617 23 Sept 2018 · 6,318 MW · 565 24 Sept 2018 · 3,434 MW · 339 25 Sept 2018 · 3,915 MW · 225 26 Sept 2018 · 1,457 MW · 126 27 Sept 2018 · 1,204 MW · 106 28 Sept 2018 · 1,363 MW · 269 29 Sept 2018 · 2,843 MW · 276 30 Sept 2018 · 2,832 MW · 295 1 Oct 2018 · 2,971 MW · 330 2 Oct 2018 · 4,369 MW · 284 3 Oct 2018 · 2,600 MW · 300 4 Oct 2018 · 3,008 MW · 234 5 Oct 2018 · 1,417 MW · 190 6 Oct 2018 · 2,610 MW · 233 7 Oct 2018 · 2,521 MW · 218 8 Oct 2018 · 4,614 MW · 285 9 Oct 2018 · 889 MW · 55 10 Oct 2018 · 850 MW · 60 11 Oct 2018 · 31 MW · 6 12 Oct 2018 · 12 MW · 2 13 Oct 2018 · 136 MW · 10
12 Sept 23 Sept 3 Oct 10 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

41°high
53km/h · peak gust
5%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 10.6 mm on 18 Oct.

This area had burned before

16% of the perimeter overlaps earlier fires recorded since 2016: 20,378 ha in 2016, 8,680 ha in 2017.

How big is it?

20 km
It burned the equivalent of 1.2 times the area of London (1,824 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Victoria Daly where it started
    183,841 ha
    1.2 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area1.6 ha
Residents< 20

Inside the perimeter there were about 1.6 hectares of built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Very dry air: 28 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Sept 35.7 °C 8 % 34 km/h 0.0 mm Very extreme 83
13 Sept 35.3 °C 13 % 34 km/h 0.0 mm Extreme 61
14 Sept 35.5 °C 13 % 33 km/h 0.0 mm Extreme 67
15 Sept 37.3 °C 10 % 31 km/h 0.0 mm Extreme 60
16 Sept 36.5 °C 13 % 44 km/h 0.0 mm Very extreme 82
17 Sept 36.5 °C 7 % 36 km/h 0.0 mm Very extreme 73
18 Sept 37.0 °C 12 % 39 km/h 0.0 mm Very extreme 78
19 Sept 37.4 °C 13 % 20 km/h 0.0 mm Very high 49
20 Sept 35.8 °C 14 % 40 km/h 0.0 mm Very extreme 83
21 Sept 35.9 °C 7 % 39 km/h 0.0 mm Very extreme 83
22 Sept 37.0 °C 5 % 48 km/h 0.0 mm Very extreme 111
23 Sept 37.1 °C 5 % 50 km/h 0.0 mm Very extreme 124
24 Sept 36.9 °C 7 % 42 km/h 0.0 mm Very extreme 104
25 Sept 35.8 °C 12 % 44 km/h 0.0 mm Very extreme 94
26 Sept 36.2 °C 11 % 39 km/h 0.0 mm Very extreme 86
27 Sept 35.9 °C 13 % 42 km/h 0.0 mm Very extreme 74
28 Sept 37.0 °C 14 % 43 km/h 0.0 mm Very extreme 76
29 Sept 37.6 °C 10 % 40 km/h 0.0 mm Very extreme 74
30 Sept 37.6 °C 8 % 52 km/h 0.0 mm Very extreme 108
1 Oct 37.4 °C 10 % 53 km/h 0.0 mm Very extreme 114
2 Oct 36.6 °C 14 % 45 km/h 0.0 mm Very extreme 89
3 Oct 37.7 °C 14 % 35 km/h 0.0 mm Extreme 61
4 Oct 39.5 °C 15 % 31 km/h 0.0 mm Very high 47
5 Oct 39.5 °C 15 % 29 km/h 0.0 mm Extreme 60
6 Oct 40.7 °C 11 % 41 km/h 0.0 mm Very extreme 77
7 Oct 40.8 °C 14 % 32 km/h 0.0 mm Extreme 69
8 Oct 38.7 °C 17 % 38 km/h 0.0 mm Very extreme 72
9 Oct 39.0 °C 20 % 39 km/h 0.0 mm Extreme 55
10 Oct 39.1 °C 16 % 31 km/h 0.0 mm Very high 42
11 Oct 33.6 °C 28 % 45 km/h 0.0 mm Extreme 68
12 Oct 37.0 °C 20 % 37 km/h 0.0 mm Very high 46
13 Oct 38.8 °C 15 % 37 km/h 0.0 mm Extreme 58
14 Oct after 39.7 °C 19 % 36 km/h 0.0 mm Extreme 53
15 Oct after 39.7 °C 15 % 32 km/h 0.0 mm Very high 41
16 Oct after 39.7 °C 18 % 33 km/h 0.0 mm Extreme 64
17 Oct after 36.6 °C 33 % 46 km/h 0.5 mm Very high 41
18 Oct after 31.9 °C 46 % 24 km/h 10.6 mm Very low 5

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Sept 2018
After · 20 Oct 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 6,395Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Victoria Daly fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 12 September 2018 to 13 October 2018 (32 days). The perimeter dates it from 14 September 2018 to 13 October 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 182,393 hectares (1,823.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Victoria Daly (183,841 ha, 1.2 %).
What was the weather like?
During the fire the temperature reached 40.8 °C, humidity dropped to 5 % and gusts hit 53 km/h. The fire danger index (FWI) reached 124, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 14 September 2018 → 12 September 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 5 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 14 September 2018 to 13 October 2018. 6,395 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.