Skip to content
worldfires
AU · Australia · –

Victoria Daly fire, 18 September 2017 Victoria Daly

Out · last detection

The fire started on in Victoria Daly, Australia, and satellites saw it burning for 8 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 8,114 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
8,114ha
GWIS perimeter (Copernicus)
Duration
8days
18 Sept 2017 – 25 Sept 2017
Municipalities hit
1
local government areas
Started on
18 Sept
2017
Heat detections
224
in a single hotspot: 135 MW
Danger at start
86
Very extreme · FWI index
Average daily power
587MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 18 Sept25 Sept
22 Sept 2017

How it evolved, day by day

18 Sept 2017 · 20 MW · 6 19 Sept 2017 · 2,325 MW · 145 20 Sept 2017 · 398 MW · 45 21 Sept 2017 · 185 MW · 27 22 Sept 2017 · 9 MW · 1
18 Sept 19 Sept 20 Sept 21 Sept 22 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

39°high
40km/h · peak gust
8%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started.

This area had burned before

7% of the perimeter overlaps earlier fires recorded since 2016: 550 ha in 2016.

How big is it?

10 km
It burned the equivalent of 5.1% of the area of London (81 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Victoria Daly where it started
    8,157 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Very dry air: 28 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
18 Sept 36.6 °C 8 % 37 km/h 0.0 mm Very extreme 86
19 Sept 37.4 °C 9 % 40 km/h 0.0 mm Very extreme 88
20 Sept 37.5 °C 18 % 31 km/h 0.0 mm Extreme 60
21 Sept 38.2 °C 16 % 32 km/h 0.0 mm Extreme 59
22 Sept 37.2 °C 21 % 31 km/h 0.0 mm Extreme 55
23 Sept 38.5 °C 21 % 28 km/h 0.0 mm Very high 50
24 Sept 38.1 °C 26 % 37 km/h 0.0 mm Extreme 52
25 Sept 38.8 °C 19 % 29 km/h 0.0 mm Very high 44
26 Sept after 39.1 °C 20 % 33 km/h 0.0 mm Very high 42
27 Sept after 37.7 °C 28 % 35 km/h 0.0 mm Very high 42
28 Sept after 38.0 °C 28 % 34 km/h 0.0 mm Very high 43
29 Sept after 38.2 °C 32 % 36 km/h 0.1 mm Very high 48
30 Sept after 37.8 °C 30 % 34 km/h 0.0 mm Very high 44
1 Oct after 38.5 °C 27 % 28 km/h 0.0 mm Very high 48
2 Oct after 36.6 °C 28 % 46 km/h 0.2 mm Extreme 62
3 Oct after 39.0 °C 15 % 40 km/h 0.0 mm Extreme 56
4 Oct after 39.8 °C 12 % 45 km/h 0.0 mm Very extreme 87
5 Oct after 40.5 °C 12 % 37 km/h 0.0 mm Very extreme 80

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 11 Sept 2017
After · 2 Oct 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 224Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Victoria Daly fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 18 September 2017 to 25 September 2017 (8 days). The perimeter dates it from 18 September 2017 to 22 September 2017.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 8,114 hectares (81.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Victoria Daly (8,157 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 38.8 °C, humidity dropped to 8 % and gusts hit 40 km/h. The fire danger index (FWI) reached 88, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 22 September 2017 → 25 September 2017.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 18 September 2017 to 22 September 2017. 224 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.