Skip to content
worldfires
AR · Argentina · –

Victoria fire, 28 September 2020 Victoria

Out · last detection 11 Oct 2020, 18:05 UTC

The fire started on 28 September 2020 in Victoria, Argentina, and satellites saw it burning for 14 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 2,070 hectares from heat detections, spread across a single municipality.

It is the 119th largest in Buenos Aires since 2016 (of 203 with a page). Number 385 in Argentina in 2020, of 669.

Burnt area
2,070ha
GWIS perimeter (Copernicus)
Duration
14days
28 Sept 2020 – 11 Oct 2020
Municipalities hit
1
departments
Started on
28 Sept
2020
Heat detections
329
in a single hotspot: 105 MW
Danger at start
7
Low · FWI index
Average daily power
432MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 28 Sept11 Oct
11 Oct 2020

How it evolved, day by day

28 Sept 2020 · 2,096 MW · 56 29 Sept 2020 · 1,323 MW · 109 30 Sept 2020 · 979 MW · 49 1 Oct 2020 · 130 MW · 33 2 Oct 2020 · 144 MW · 16 3 Oct 2020 · 37 MW · 5 5 Oct 2020 · 19 MW · 2 6 Oct 2020 · 85 MW · 3 7 Oct 2020 · 7 MW · 1 8 Oct 2020 · 118 MW · 3 9 Oct 2020 · 65 MW · 7 10 Oct 2020 · 524 MW · 34 11 Oct 2020 · 92 MW · 11
28 Sept 1 Oct 5 Oct 8 Oct 11 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
56km/h · peak gust
19%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 45.2 mm on 20 Oct.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 1.3% of the area of London (21 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Victoria where it started
    2,080 ha reached on 28 Sept
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
28 Sept 24.5 °C 28 % 25 km/h 0.0 mm Low 7
29 Sept 28.2 °C 24 % 42 km/h 0.0 mm High 23
30 Sept 32.2 °C 34 % 25 km/h 0.0 mm Moderate 17
1 Oct 22.0 °C 27 % 48 km/h 0.0 mm High 26
2 Oct 18.8 °C 42 % 56 km/h 0.0 mm High 24
3 Oct 15.5 °C 39 % 46 km/h 0.0 mm Moderate 21
4 Oct 12.6 °C 69 % 34 km/h 1.7 mm Low 10
5 Oct 17.6 °C 48 % 40 km/h 0.0 mm Very low 5
6 Oct 23.2 °C 35 % 22 km/h 0.0 mm Low 6
7 Oct 27.5 °C 31 % 25 km/h 0.0 mm Moderate 13
8 Oct 26.2 °C 19 % 27 km/h 0.0 mm Moderate 18
9 Oct 26.4 °C 23 % 50 km/h 0.0 mm High 36
10 Oct 27.2 °C 22 % 38 km/h 0.0 mm High 30
11 Oct 24.3 °C 31 % 48 km/h 0.0 mm High 27
12 Oct after 24.1 °C 34 % 33 km/h 0.0 mm Moderate 21
13 Oct after 27.9 °C 23 % 22 km/h 0.0 mm Moderate 19
14 Oct after 28.6 °C 29 % 30 km/h 0.0 mm Moderate 20
15 Oct after 28.4 °C 38 % 27 km/h 0.0 mm Moderate 18
16 Oct after 30.4 °C 30 % 36 km/h 0.0 mm Moderate 21
17 Oct after 32.1 °C 38 % 37 km/h 0.1 mm Moderate 20
18 Oct after 37.1 °C 32 % 41 km/h 0.0 mm High 32
19 Oct after 33.0 °C 44 % 63 km/h 0.7 mm Moderate 20
20 Oct after 16.2 °C 62 % 55 km/h 45.2 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 7.2, a minimum humidity of 28% and 1 day without rain. Fires in the area that started in weather like this since 2016: 18.

FWI at the start 7.2
Minimum humidity 28 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Victoria fire, July 2020
12,278 ha 12 days FWI 6.9 Min. humidity 30 % 23 km away, in 2020

First rain (1 mm or more) after it ended: 9.0 mm on 7 Aug.

What happened to them

12 days
median duration
3,662 ha
median area
28 %
went past 10,000 ha
7.8 mm
rain at the end (median; 18 of 18 had it)

It stayed below its twins: 2,070 ha against a median of 3,662 ha. It lasted 14 days, against 12 days.

All of them had rain in the ten days after the end: the first rainy day brought a median of 7.8 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

45.2 mmfirst rain
20 Oct9 days after it ended
56km/h · max. gust

It was considered over on 11 Oct, and on 20 Oct 45.2 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 18 of 18, with a median of 7.8 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 21 Sept 2020
After · 18 Oct 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 329Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Argentina

Frequently asked questions

How long did the Victoria fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 28 September 2020 to 11 October 2020 (14 days). The perimeter dates it from 28 September 2020 to 5 October 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 2,070 hectares (20.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Victoria (2,080 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 32.2 °C, humidity dropped to 19 % and gusts hit 56 km/h. The fire danger index (FWI) reached 36, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Argentina (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 18. Their median duration was 12 days and their median area 3,662 ha; 28 % went past 10,000 ha. All of them had rain in the ten days after the end: the first rainy day brought a median of 7.8 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · 100 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 5 October 2020 → 11 October 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911 · 100.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 28 September 2020 to 5 October 2020. 329 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.