Skip to content
worldfires
RU · Russia · –

Verkhnevilyuysky Ulus fire, 12 September 2016 Verkhnevilyuysky Ulus

Out · last detection

The fire started on in Verkhnevilyuysky Ulus, Russia, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 13,390 hectares from heat detections, spread across a single municipality.

It is number 352 by size of the 1347 fires with a page that started in Sakha Republic since 2016. Number 145 in Russia in 2016, of 692.

Burnt area
13,390ha
GWIS perimeter (Copernicus)
Duration
10days
12 Sept 2016 – 21 Sept 2016
Municipalities hit
1
districts
Started on
12 Sept
2016
Heat detections
1,181
in a single hotspot: 123 MW
Danger at start
18
Moderate · FWI index
Average daily power
1.0GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 12 Sept21 Sept
20 Sept 2016

How it evolved, day by day

12 Sept 2016 · 286 MW · 27 13 Sept 2016 · 241 MW · 51 14 Sept 2016 · 444 MW · 71 15 Sept 2016 · 718 MW · 136 16 Sept 2016 · 409 MW · 132 17 Sept 2016 · 2,977 MW · 255 18 Sept 2016 · 2,023 MW · 208 19 Sept 2016 · 595 MW · 81 20 Sept 2016 · 1,389 MW · 220
12 Sept 14 Sept 17 Sept 20 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

20°high
40km/h · peak gust
28%lowest humidity

It had gone 17 days without rain (1 mm or more) when it started. Rain came after the fire: 1.8 mm on 23 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 8.5% of the area of London (134 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Verkhnevilyuysky Ulus where it started
    12,352 ha reached on 12 Sept
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
12 Sept 17.2 °C 33 % 30 km/h 0.0 mm Moderate 18
13 Sept 17.8 °C 42 % 21 km/h 0.0 mm Moderate 14
14 Sept 18.2 °C 33 % 23 km/h 0.0 mm Moderate 14
15 Sept 16.1 °C 48 % 30 km/h 0.0 mm Moderate 14
16 Sept 18.1 °C 40 % 25 km/h 0.0 mm Moderate 14
17 Sept 19.6 °C 28 % 35 km/h 0.0 mm Moderate 19
18 Sept 16.0 °C 40 % 40 km/h 0.0 mm Moderate 19
19 Sept 11.3 °C 49 % 30 km/h 0.0 mm Moderate 16
20 Sept 13.6 °C 40 % 22 km/h 0.0 mm Moderate 13
21 Sept 14.0 °C 43 % 32 km/h 1.5 mm Moderate 16
22 Sept after 8.8 °C 72 % 26 km/h 0.0 mm Very low 4
23 Sept after 5.7 °C 69 % 28 km/h 1.8 mm Low 6

Its twins: fires that started in the same weather

It started with an FWI of 17.6, a minimum humidity of 33% and 17 days without rain. Fires in the area that started in weather like this since 2017: 24.

FWI at the start 17.6
Minimum humidity 33 %
Days without rain 17
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Olyokminsky Ulus fire, August 2020
62,308 ha 32 days FWI 15.7 Min. humidity 34 % 60 km away, in 2020

First rain (1 mm or more) after it ended: 13.4 mm on 27 Sept.

What happened to them

13 days
median duration
8,052 ha
median area
46 %
went past 10,000 ha
2.9 mm
rain at the end (median; 23 of 24 had it)

It was 1.7 times larger than the median of its twins and lasted 10 days, against 13 days.

Only 8 of its 24 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 1 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.9 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.8 mmfirst rain
23 Sept2 days after it ended
40km/h · max. gust

It was considered over on 21 Sept, and on 23 Sept 1.8 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 23 of 24, with a median of 2.9 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2017.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 5 Sept 2016
After · 28 Sept 2016

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 1,181Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Verkhnevilyuysky Ulus fire last?
GWIS (Copernicus) dates it between 12 September 2016 and 21 September 2016: 10 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 13,390 hectares (133.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Verkhnevilyuysky Ulus (12,352 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 19.6 °C, humidity dropped to 28 % and gusts hit 40 km/h. The fire danger index (FWI) reached 19, class Moderate.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2017 with a similar FWI, humidity and dry spell: 24. Their median duration was 13 days and their median area 8,052 ha; 46 % went past 10,000 ha. Only 8 of its 24 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 1 of 24, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.9 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 1,181 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.