Skip to content
worldfires
RU · Russia · –

Verkhnekolymsky Ulus fire, 11 July 2020 Verkhnekolymsky Ulus, Srednekolymsky Ulus

Out · last detection 27 Jul 2020, 02:04 UTC

The fire started on 11 July 2020 in Verkhnekolymsky Ulus, Russia, and satellites saw it burning for 17 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 156,068 hectares from heat detections, spread across 2 municipalities.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

Other fire pages in the same area and on the same dates:

It is the 13th largest in Sakha Republic since 2016 (of 1347 with a page). The largest in Russia in 2020, of 592.

Burnt area
156,068ha
GWIS perimeter (Copernicus)
Duration
17days
11 Jul 2020 – 27 Jul 2020
Municipalities hit
2
districts
Started on
11 Jul
2020
Heat detections
16,542
in a single hotspot: 707 MW
Danger at start
4
Very low · FWI index
Average daily power
16.2GW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 11 Jul27 Jul
27 Jul 2020

How it evolved, day by day

11 Jul 2020 · 27 MW · 4 12 Jul 2020 · 266 MW · 39 13 Jul 2020 · 328 MW · 75 14 Jul 2020 · 262 MW · 18 16 Jul 2020 · 109 MW · 15 17 Jul 2020 · 125 MW · 46 18 Jul 2020 · 337 MW · 70 19 Jul 2020 · 3,664 MW · 490 20 Jul 2020 · 64,139 MW · 1750 21 Jul 2020 · 41,127 MW · 2710 22 Jul 2020 · 48,748 MW · 4246 23 Jul 2020 · 20,082 MW · 1766 24 Jul 2020 · 24,899 MW · 1434 25 Jul 2020 · 8,400 MW · 997 26 Jul 2020 · 44,462 MW · 2538 27 Jul 2020 · 2,752 MW · 344
11 Jul 16 Jul 20 Jul 24 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

32°high
45km/h · peak gust
28%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 4.6 mm on 28 Jul.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned almost the same area as London (1,561 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Verkhnekolymsky Ulus where it started
    120,604 ha reached on 11 Jul
    1.8 %
  2. 37,815 ha reached on 11 Jul
    0.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
11 Jul 23.1 °C 48 % 31 km/h 0.0 mm Very low 4
12 Jul 25.9 °C 34 % 21 km/h 0.0 mm Low 7
13 Jul 25.9 °C 35 % 23 km/h 0.0 mm Low 10
14 Jul 22.5 °C 48 % 31 km/h 0.0 mm Moderate 12
15 Jul 17.0 °C 56 % 40 km/h 0.0 mm Moderate 11
16 Jul 11.6 °C 50 % 19 km/h 0.1 mm Low 7
17 Jul 14.1 °C 52 % 20 km/h 0.0 mm Low 8
18 Jul 15.6 °C 50 % 27 km/h 0.0 mm Low 10
19 Jul 23.1 °C 38 % 31 km/h 0.0 mm Low 9
20 Jul 27.6 °C 34 % 35 km/h 0.0 mm Moderate 16
21 Jul 30.0 °C 29 % 38 km/h 0.0 mm High 23
22 Jul 31.4 °C 31 % 40 km/h 0.0 mm High 27
23 Jul 31.4 °C 32 % 21 km/h 0.0 mm Moderate 20
24 Jul 31.5 °C 28 % 17 km/h 0.0 mm Moderate 20
25 Jul 30.5 °C 38 % 15 km/h 0.0 mm Moderate 18
26 Jul 32.4 °C 36 % 34 km/h 0.0 mm High 26
27 Jul 23.8 °C 61 % 45 km/h 2.8 mm Moderate 21
28 Jul after 15.6 °C 74 % 28 km/h 4.6 mm Very low 0

Its twins: fires that started in the same weather

It started with an FWI of 3.5, a minimum humidity of 48% and rain the day before. Fires in the area that started in weather like this since 2018: 11.

FWI at the start 3.5
Minimum humidity 48 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Verkhnekolymsky Ulus fire, July 2023
3,579 ha 11 days FWI 1.7 Min. humidity 43 % 89 km away, in 2023

First rain (1 mm or more) after it ended: 22.0 mm on 22 Jul.

What happened to them

Fires in the area that started in similar weather: 11. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

4.6 mmfirst rain
28 Julthe day after it ended
45km/h · max. gust

It was considered over on 27 Jul, and on 28 Jul 4.6 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2018.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 4 Jul 2020
After · 3 Aug 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 16,542Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Verkhnekolymsky Ulus fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 11 July 2020 to 27 July 2020 (17 days). The perimeter dates it from 16 July 2020 to 27 July 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 156,068 hectares (1,560.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Verkhnekolymsky Ulus (120,604 ha, 1.8 %); Srednekolymsky Ulus (37,815 ha, 0.3 %).
What was the weather like?
During the fire the temperature reached 32.4 °C, humidity dropped to 28 % and gusts hit 45 km/h. The fire danger index (FWI) reached 27, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 16 July 2020 → 11 July 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 16 July 2020 to 27 July 2020. 16,542 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.