Skip to content
worldfires
ES · Spain ·

Vega de Valcarce fire, April 2017 Cervantes, Vega de Valcarce, Pedrafita do Cebreiro

Out · last detection 22 Apr 2017, 12:57 UTC

The fire started on 22 April 2017 in Vega de Valcarce, Spain, and satellites saw it burning for 1 day. Copernicus mapped a burnt perimeter of 150 hectares from satellite imagery, spread across 3 municipalities. According to EGIF (MITECO), it was detected on 22 April 2017 at 02:01 and declared extinguished on 25 April 2017.

It is the 59th largest in León since 2016 (of 86 with a page). Number 113 in Spain in 2017, of 144.

The power measured by the satellite is low (18.4 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
150ha
Copernicus perimeter
Duration
1day
22 Apr 2017 – 22 Apr 2017
Municipalities hit
3
municipalities
Started on
22 Apr
2017
Heat detections
11
in a single hotspot: 18 MW
Danger at start
13
Moderate · FWI index
Average daily power
137MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 22 Apr22 Apr

How it evolved, day by day

22 Apr 2017 · 137 MW · 11

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

20°high
31km/h · peak gust
23%lowest humidity

It had gone 20 days without rain (1 mm or more) when it started. Rain came after the fire: 2.4 mm on 25 Apr.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each town

  1. Cervantes 1,142 inhabitants · 15.6 km from the centre
    95 ha reached on 22 Apr
    0.3 %
  2. Vega de Valcarce 555 inhabitants · 6.2 km from the centre where it started
    51 ha reached on 22 Apr
    0.7 %
  3. Pedrafita do Cebreiro 868 inhabitants · 2.8 km from the centre
    4 ha
    0.0 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Other natural land63 %
  • Coniferous forest30 %
  • Broadleaved forest5.3 %
  • Scrub and transitional woodland2.0 %

Natura 2000 protected area affected: 48 %

Natura 2000 sites (European Environment Agency, 2024 release) crossed by the perimeter.

Land cover inside the perimeter according to Corine Land Cover, as reported by Copernicus.

People and buildings inside the perimeter

GHSL 2015
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2015, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

Official record

According to EGIF (MITECO), this fire started on 22 April 2017 and burned 152 ha (the satellite measured 150 ha).

MITECO, Estadística General de Incendios Forestales (EGIF). This is the agency’s consolidated statistic: it measures the area in its own way, which is why it can differ from the satellite.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
22 Apr 19.8 °C 23 % 31 km/h 0.0 mm Moderate 13
23 Apr after 19.8 °C 25 % 34 km/h 0.2 mm Moderate 14
24 Apr after 17.5 °C 36 % 37 km/h 0.6 mm Moderate 17
25 Apr after 11.5 °C 62 % 44 km/h 2.4 mm Low 10

Its twins: fires that started in the same weather

It started with an FWI of 12.8, a minimum humidity of 23% and 20 days without rain. Fires in the area that started in weather like this since 2016: 18.

FWI at the start 12.8
Minimum humidity 23 %
Days without rain 20
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Amares fire, February 2023
247 ha 1 day FWI 12.6 Min. humidity 23 % 161 km away, in 2023

First rain (1 mm or more) after it ended: 1.2 mm on 20 Feb.

What happened to them

2 days
median duration
248 ha
median area
6 %
went past 1,000 ha
3.2 mm
rain at the end (median; 12 of 18 had it)

It stayed below its twins: 150 ha against a median of 248 ha. It lasted 1 day, against 2 days.

In 6 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.4 mmfirst rain
25 Apr3 days after it ended
31km/h · max. gust

It was considered over on 22 Apr, and on 25 Apr 2.4 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 12 of 18, with a median of 3.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 15 Apr 2017
After · 29 Apr 2017

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 11Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Spain

Frequently asked questions

How long did the Vega de Valcarce fire last?
Copernicus dates it between 22 April 2017 and 22 April 2017: 1 day between the first and last image with fire. According to EGIF (MITECO), it was detected on 22 April 2017 at 02:01 and declared extinguished on 25 April 2017.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 150 hectares (1.5 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Cervantes (95 ha, 0.3 %); Vega de Valcarce (51 ha, 0.7 %); Pedrafita do Cebreiro (4 ha, 0.0 %).
Did the fire reach a town?
The fire came within 2.8 km of the centre of Pedrafita do Cebreiro, the closest of the areas it touched. That is the distance from the perimeter, or the nearest hotspot, to the point marking the centre; it does not mean it entered the houses.
What was the weather like?
During the fire the temperature reached 19.8 °C, humidity dropped to 23 % and gusts hit 31 km/h. The fire danger index (FWI) reached 13, class Moderate.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Spain (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 18. Their median duration was 2 days and their median area 248 ha; 6 % went past 1,000 ha. In 6 of 18, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 3.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 11 Suomi-NPP VIIRS detections on those dates.
  • Compared with EGIF (MITECO): 152 official ha against 150 ha of perimeter; they agree within 25%.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2015, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.