Skip to content
worldfires
GY · Guyana · –

Upper Demerara-Berbice fire, 18 October 2026 Upper Demerara-Berbice

Out · last detection 10 Nov 2026, 05:20 UTC

The fire started on 18 October 2026 in Upper Demerara-Berbice, Guyana, and satellites saw it burning for 24 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 1,343 hectares from heat detections, spread across a single municipality.

Number 26 in Guyana in 2026, of 40.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
1,343ha
GWIS perimeter (Copernicus)
Duration
24days
18 Oct 2026 – 10 Nov 2026
Municipalities hit
1
regions
Started on
18 Oct
2026
Heat detections
138
in a single hotspot: 55 MW
Danger at start
9
Low · FWI index
Average daily power
39MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 18 Oct10 Nov
10 Nov 2026

How it evolved, day by day

18 Oct 2026 · 8 MW · 1 19 Oct 2026 · 1 MW · 1 21 Oct 2026 · 31 MW · 1 22 Oct 2026 · 2 MW · 2 23 Oct 2026 · 153 MW · 8 24 Oct 2026 · 35 MW · 7 25 Oct 2026 · 25 MW · 14 26 Oct 2026 · 105 MW · 13 27 Oct 2026 · 108 MW · 11 28 Oct 2026 · 16 MW · 8 29 Oct 2026 · 6 MW · 4 30 Oct 2026 · 14 MW · 7 31 Oct 2026 · 65 MW · 9 1 Nov 2026 · 5 MW · 3 2 Nov 2026 · 0 MW · 0 3 Nov 2026 · 4 MW · 2 4 Nov 2026 · 14 MW · 6 5 Nov 2026 · 7 MW · 5 6 Nov 2026 · 166 MW · 14 7 Nov 2026 · 58 MW · 9 8 Nov 2026 · 28 MW · 6 9 Nov 2026 · 10 MW · 6 10 Nov 2026 · 2 MW · 1
18 Oct 24 Oct 29 Oct 6 Nov

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

36°high
33km/h · peak gust
37%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 1.2 mm on 11 Nov.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 0.8% of the area of London (13 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Upper Demerara-Berbice where it started
    1,353 ha reached on 18 Oct
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · forecast models, provisional until the ERA5 reanalysis arrives

Day High Min. humidity Peak gust Rain Danger (FWI)
18 Oct 32.8 °C 52 % 30 km/h 6.4 mm Low 9
19 Oct 32.8 °C 55 % 23 km/h 6.9 mm Very low 2
20 Oct 33.8 °C 51 % 25 km/h 0.6 mm Very low 1
21 Oct 35.1 °C 39 % 32 km/h 0.2 mm Moderate 13
22 Oct 34.0 °C 43 % 29 km/h 0.6 mm Moderate 14
23 Oct 33.6 °C 52 % 27 km/h 1.3 mm Low 8
24 Oct 35.0 °C 41 % 28 km/h 0.7 mm Moderate 12
25 Oct 34.9 °C 51 % 26 km/h 0.0 mm Moderate 13
26 Oct 35.4 °C 41 % 30 km/h 0.5 mm Moderate 18
27 Oct 34.9 °C 44 % 23 km/h 0.8 mm Moderate 15
28 Oct 34.6 °C 43 % 19 km/h 2.9 mm Moderate 16
29 Oct 34.6 °C 52 % 29 km/h 0.9 mm Low 6
30 Oct 33.4 °C 55 % 27 km/h 2.3 mm Low 7
31 Oct 34.4 °C 49 % 27 km/h 1.3 mm Low 8
1 Nov 34.5 °C 47 % 26 km/h 1.8 mm Moderate 12
2 Nov 35.3 °C 45 % 31 km/h 1.6 mm Moderate 13
3 Nov 34.5 °C 43 % 31 km/h 0.6 mm Moderate 16
4 Nov 34.9 °C 45 % 27 km/h 0.8 mm Moderate 15
5 Nov 34.8 °C 45 % 30 km/h 0.5 mm Moderate 20
6 Nov 35.1 °C 38 % 28 km/h 0.0 mm High 22
7 Nov 35.5 °C 37 % 32 km/h 0.1 mm High 26
8 Nov 35.5 °C 39 % 32 km/h 0.1 mm High 24
9 Nov 34.3 °C 45 % 33 km/h 4.7 mm High 22
10 Nov 34.3 °C 49 % 27 km/h 0.5 mm Low 7
11 Nov after 34.5 °C 44 % 32 km/h 1.2 mm Moderate 19

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 11 Oct 2026
After · 17 Nov 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 26 October 2026 the air beside the fire reached 54 µg/m³ of PM2.5. That day averaged 22: 1.5 times the WHO daily guideline (15).

PM2.5 peak54 µg/m³
Days over the guideline5 days
PM1058 µg/m³
Optical depth0.66
16 Oct19 Oct22 Oct25 Oct28 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 138Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Guyana

Frequently asked questions

How long did the Upper Demerara-Berbice fire last?
GWIS (Copernicus) dates it between 18 October 2026 and 10 November 2026: 24 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 1,343 hectares (13.4 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Upper Demerara-Berbice (1,353 ha, 0.1 %).
Is the Upper Demerara-Berbice fire still active?
No fire detections since 10 Nov 2026, 05:20 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 35.5 °C, humidity dropped to 37 % and gusts hit 33 km/h. The fire danger index (FWI) reached 26, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Guyana (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 912 · Emergency number and official warnings

Satellite cross-check

History of this page · 6 Changes in area, dates, name, official record or merged pages, compared every night since 31 October 2026.
  1. Last day with fire: 31 October 2026 → 10 November 2026.
  2. Area: 1,281 → 1,334 ha.
  3. Area: 1,226 → 1,281 ha.
  4. Area: 1,192 → 1,226 ha.
  5. Area: 1,160 → 1,192 ha.
  6. Page published (1,160 ha).

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 912.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 138 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: ECMWF IFS model, provisional until the ERA5 reanalysis arrives.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM1 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.