Upper Ash Fire, August 2017 Douglas
The fire started on 10 August 2017 in Douglas, United States, and satellites saw it burning for 1 day. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 790 hectares, spread across a single county.
It is the 253th largest in Oregon since 2016 (of 327 with a page). Number 438 in United States in 2017, of 619.
- Burnt area
- 790ha
- official perimeter (MTBS / NIFC)
- Duration
- 1day
- 10 Aug 2017 – 10 Aug 2017
- Municipalities hit
- 1
- counties
- Started on
- 10 Aug
- 2017
- Heat detections
- 219
- in a single hotspot: 52 MW
- Danger at start
- 12
- Moderate · FWI index
- Energy released
- 27MW
- sum of detected power
Where it burned
How it evolved, day by day
Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.
The weather it burned in
It had gone one day without rain (1 mm or more) when it started.
This area had burned before
No earlier perimeters overlap this fire since 2016, when the satellite record begins.
What happened to each town
-
Douglas where it started786 ha reached on 10 Aug0.1 %
Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance is from the town centre to the nearest fire: staying a kilometre away does not mean it reached the houses.
The weather day by day
ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.
Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)
| Day | High | Min. humidity | Peak gust | Rain | Danger (FWI) |
|---|---|---|---|---|---|
| 10 Aug | 28.1 °C | 42 % | 29 km/h | 1.7 mm | Moderate 12 |
| 11 Aug after | 28.5 °C | 33 % | 31 km/h | 0.9 mm | Moderate 20 |
| 12 Aug after | 26.3 °C | 32 % | 41 km/h | 0.0 mm | High 26 |
| 13 Aug after | 20.9 °C | 59 % | 37 km/h | 0.0 mm | Moderate 19 |
| 14 Aug after | 23.7 °C | 27 % | 39 km/h | 0.0 mm | High 26 |
| 15 Aug after | 24.6 °C | 20 % | 39 km/h | 0.0 mm | High 32 |
| 16 Aug after | 28.2 °C | 25 % | 47 km/h | 0.0 mm | High 34 |
| 17 Aug after | 29.0 °C | 20 % | 40 km/h | 0.0 mm | High 37 |
| 18 Aug after | 28.5 °C | 19 % | 47 km/h | 0.0 mm | Very high 38 |
| 19 Aug after | 25.9 °C | 27 % | 50 km/h | 0.0 mm | Very high 39 |
| 20 Aug after | 26.9 °C | 23 % | 46 km/h | 0.0 mm | Very high 38 |
| 21 Aug after | 28.6 °C | 27 % | 31 km/h | 0.0 mm | High 32 |
| 22 Aug after | 28.0 °C | 33 % | 37 km/h | 0.0 mm | High 32 |
| 23 Aug after | 27.0 °C | 34 % | 37 km/h | 0.0 mm | High 30 |
| 24 Aug after | 22.5 °C | 48 % | 41 km/h | 0.0 mm | High 26 |
| 25 Aug after | 26.9 °C | 26 % | 37 km/h | 0.0 mm | High 30 |
| 26 Aug after | 32.4 °C | 19 % | 32 km/h | 0.0 mm | High 37 |
| 27 Aug after | 32.8 °C | 13 % | 28 km/h | 0.0 mm | Very high 41 |
| 28 Aug after | 35.0 °C | 15 % | 34 km/h | 0.0 mm | Very high 43 |
| 29 Aug after | 30.3 °C | 27 % | 37 km/h | 0.0 mm | Very high 39 |
| 30 Aug after | 25.3 °C | 26 % | 38 km/h | 0.0 mm | High 36 |
| 31 Aug after | 29.5 °C | 23 % | 42 km/h | 0.0 mm | Very high 39 |
| 1 Sept after | 35.7 °C | 13 % | 32 km/h | 0.0 mm | Very high 44 |
| 2 Sept after | 36.6 °C | 13 % | 35 km/h | 0.0 mm | Very high 46 |
| 3 Sept after | 33.7 °C | 15 % | 39 km/h | 0.0 mm | Very high 49 |
Before and after, from space
Drag the line to compare the same ground before the fire and after it.
If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.
Detections table · 219Every satellite heat detection, one by one, with time, satellite, power and coordinates.
| Date and time | Satellite | FRP (MW) | Lat | Lon |
|---|
Other fires nearby
- 20,522 haSmith DouglasAugust 2021 · 1 day · 4 km away
- 13,649 haJack Fire DouglasJuly 2021 · 1 day · 15 km away
- 21,039 haMiles DouglasJuly 2018 · 2 days · 17 km away
- 8,836 haBig Hamlin DouglasAugust 2021 · 1 day · 20 km away
- 16,027 haHappy Dog DouglasAugust 2017 · 2 days · 21 km away
- 53,330 haArchie Creek DouglasSeptember 2020 · 1 day · 34 km away
Frequently asked questions
- How long did the Upper Ash fire last?
- It burned between 10 August 2017 and 10 August 2017: 1 day, according to the start date recorded by United States agencies (MTBS / NIFC) and the heat detections seen by satellite.
- How much area did it burn?
- The official perimeter published by United States agencies (MTBS / NIFC) is 790 hectares (7.9 km²). Other tallies, such as daily incident reports, may give slightly different figures.
- Which counties burned?
- The fire only entered Douglas (786 ha, 0.1 %).
- What was the weather like?
- During the fire the temperature reached 29.0 °C, humidity dropped to 19 % and gusts hit 50 km/h. The fire danger index (FWI) reached 39, class Very high.
- Where does this data come from?
- From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.
Where to verify it
A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.
Emergency number: 911
- NIFC · National Interagency Fire Center ↗
- InciWeb · Incident Information System ↗
- MTBS · Monitoring Trends in Burn Severity ↗
Satellite cross-check
Does something look wrong on this page?
This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.
Report an error
Where this data comes from
The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.