Skip to content
worldfires
AU · Australia · –

Unincorporated NT fire, 6 October 2026 Unincorporated NT, West Arnhem

Out · last detection 23 Oct 2026, 05:06 UTC

The fire started on 6 October 2026 in Unincorporated NT, Australia, and satellites saw it burning for 18 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 17,052 hectares from heat detections, spread across 2 municipalities.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
17,052ha
GWIS perimeter (Copernicus)
Duration
18days
6 Oct 2026 – 23 Oct 2026
Municipalities hit
2
local government areas
Started on
6 Oct
2026
Heat detections
333
in a single hotspot: 128 MW
Danger at start
34
High · FWI index
Average daily power
224MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 6 Oct23 Oct
23 Oct 2026

How it evolved, day by day

6 Oct 2026 · 26 MW · 8 7 Oct 2026 · 799 MW · 47 8 Oct 2026 · 223 MW · 23 9 Oct 2026 · 594 MW · 39 10 Oct 2026 · 120 MW · 23 11 Oct 2026 · 204 MW · 26 12 Oct 2026 · 526 MW · 27 13 Oct 2026 · 1 MW · 1 14 Oct 2026 · 17 MW · 5 15 Oct 2026 · 28 MW · 14 16 Oct 2026 · 85 MW · 17 17 Oct 2026 · 492 MW · 44 18 Oct 2026 · 347 MW · 24 19 Oct 2026 · 0 MW · 0 20 Oct 2026 · 3 MW · 2 21 Oct 2026 · 148 MW · 13 22 Oct 2026 · 134 MW · 12 23 Oct 2026 · 65 MW · 8
7 Oct 10 Oct 14 Oct 18 Oct 22 Oct

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (92 passes) and with what wind. Watch the film

The weather it burned in

38°high
40km/h · peak gust
24%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 9.9 mm on 24 Oct.

This area had burned before

69% of the perimeter overlaps earlier fires recorded since 2016: 1,461 ha in 2016, 5,291 ha in 2017, 7,000 ha in 2018, 4,706 ha in 2019, 7,601 ha in 2020, 1,295 ha in 2021, 5,592 ha in 2022, 7,260 ha in 2023, 2,522 ha in 2024, 3,270 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 11,840 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 11% of the area of London (171 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Unincorporated NT where it started
    16,621 ha
    0.9 %
  2. 68 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
6 Oct 36.4 °C 31 % 35 km/h 0.0 mm High 34
7 Oct 36.9 °C 30 % 31 km/h 0.0 mm High 34
8 Oct 36.4 °C 31 % 27 km/h 0.0 mm High 33
9 Oct 36.6 °C 33 % 26 km/h 0.0 mm High 35
10 Oct 37.5 °C 28 % 31 km/h 0.0 mm High 38
11 Oct 38.0 °C 24 % 36 km/h 0.0 mm Very high 43
12 Oct 38.3 °C 30 % 40 km/h 0.0 mm Very high 39
13 Oct 37.5 °C 36 % 35 km/h 0.0 mm High 35
14 Oct 36.7 °C 37 % 29 km/h 0.1 mm High 30
15 Oct 36.7 °C 36 % 33 km/h 0.0 mm High 38
16 Oct 37.9 °C 32 % 32 km/h 0.0 mm High 38
17 Oct 37.6 °C 33 % 35 km/h 0.0 mm High 34
18 Oct 37.1 °C 39 % 23 km/h 0.1 mm High 29
19 Oct 37.2 °C 31 % 28 km/h 0.0 mm High 33
20 Oct 37.9 °C 28 % 37 km/h 0.0 mm Very high 40
21 Oct 37.6 °C 27 % 32 km/h 0.1 mm High 37
22 Oct 36.6 °C 37 % 28 km/h 0.4 mm High 34
23 Oct 35.9 °C 42 % 29 km/h 0.0 mm High 30
24 Oct after 35.0 °C 46 % 28 km/h 9.9 mm Moderate 11

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 29 Sept 2026
After · 30 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 8 October 2026 the air beside the fire reached 41 µg/m³ of PM2.5. That day averaged 22: 1.5 times the WHO daily guideline (15).

PM2.5 peak41 µg/m³
Days over the guideline9 days
PM1044 µg/m³
Optical depth0.55
4 Oct7 Oct10 Oct13 Oct16 Oct
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 333Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Unincorporated NT fire last?
GWIS (Copernicus) dates it between 6 October 2026 and 23 October 2026: 18 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 17,052 hectares (170.5 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Unincorporated NT (16,621 ha, 0.9 %); West Arnhem (68 ha, 0.0 %).
Is the Unincorporated NT fire still active?
No fire detections since 23 Oct 2026, 05:06 UTC. A lack of detections is not an official extinction.
What was the weather like?
During the fire the temperature reached 38.3 °C, humidity dropped to 24 % and gusts hit 40 km/h. The fire danger index (FWI) reached 43, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 333 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.