Skip to content
worldfires
AU · Australia · –

Unincorporated NT fire, 17 September 2026 Unincorporated NT

Out · last detection

The fire started on in Unincorporated NT, Australia, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 14,706 hectares from heat detections, spread across a single municipality.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Burnt area
14,706ha
GWIS perimeter (Copernicus)
Duration
10days
17 Sept 2026 – 26 Sept 2026
Municipalities hit
1
local government areas
Started on
17 Sept
2026
Heat detections
302
in a single hotspot: 333 MW
Danger at start
72
Very extreme · FWI index
Average daily power
585MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 17 Sept26 Sept
26 Sept 2026

How it evolved, day by day

18 Sept 2026 · 826 MW · 55 19 Sept 2026 · 168 MW · 24 20 Sept 2026 · 166 MW · 20 21 Sept 2026 · 228 MW · 33 22 Sept 2026 · 800 MW · 41 23 Sept 2026 · 721 MW · 44 24 Sept 2026 · 767 MW · 63 25 Sept 2026 · 1,383 MW · 13 26 Sept 2026 · 208 MW · 9
18 Sept 20 Sept 22 Sept 25 Sept

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (18 passes) and with what wind. Watch the film

The weather it burned in

36°high
50km/h · peak gust
20%lowest humidity

It had gone more than two months without rain (1 mm or more) when it started. Rain came after the fire: 1.6 mm on 1 Oct.

This area had burned before

93% of the perimeter overlaps earlier fires recorded since 2016: 3,948 ha in 2016, 2,609 ha in 2017, 7,427 ha in 2018, 1,547 ha in 2019, 3,044 ha in 2020, 3,317 ha in 2021, 2,375 ha in 2022, 3,753 ha in 2023, 2,440 ha in 2024, 2,772 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 13,693 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 9.3% of the area of London (147 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Unincorporated NT where it started
    14,388 ha reached on 18 Sept
    0.7 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.0 ha
Residents< 20

Inside the perimeter there were about 1.0 hectares of built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Started with Extreme FWI: 43 % of the area in Australia Strong wind: 39 % of the area in Australia 60 days without rain: 8.2 % of the area in Australia

Day High Min. humidity Peak gust Rain Danger (FWI)
17 Sept 35.5 °C 21 % 50 km/h 0.0 mm Very extreme 72
18 Sept 34.8 °C 20 % 46 km/h 0.0 mm Very extreme 71
19 Sept 34.9 °C 27 % 41 km/h 0.0 mm Extreme 60
20 Sept 34.1 °C 26 % 29 km/h 0.0 mm Very high 48
21 Sept 33.8 °C 31 % 28 km/h 0.0 mm High 34
22 Sept 34.3 °C 28 % 28 km/h 0.0 mm High 36
23 Sept 35.6 °C 26 % 29 km/h 0.0 mm Very high 40
24 Sept 34.8 °C 26 % 29 km/h 0.0 mm Very high 41
25 Sept 34.7 °C 26 % 32 km/h 0.0 mm Very high 43
26 Sept 33.8 °C 32 % 33 km/h 0.0 mm Very high 42
27 Sept after 35.5 °C 28 % 36 km/h 0.0 mm Very high 44
28 Sept after 35.1 °C 27 % 36 km/h 0.0 mm Very high 46
29 Sept after 34.6 °C 29 % 32 km/h 0.0 mm Very high 43
30 Sept after 34.8 °C 32 % 38 km/h 0.0 mm Very high 40
1 Oct after 35.4 °C 34 % 36 km/h 1.6 mm High 25

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 10 Sept 2026
After · 3 Oct 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 17 September 2026 the air beside the fire reached 36 µg/m³ of PM2.5. That day averaged 25: 1.6 times the WHO daily guideline (15).

PM2.5 peak36 µg/m³
Days over the guideline3 days
PM1038 µg/m³
Optical depth0.73
15 Sept18 Sept21 Sept24 Sept27 Sept
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 302Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Unincorporated NT fire last?
GWIS (Copernicus) dates it between 17 September 2026 and 26 September 2026: 10 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 14,706 hectares (147.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Unincorporated NT (14,388 ha, 0.7 %).
What was the weather like?
During the fire the temperature reached 35.6 °C, humidity dropped to 20 % and gusts hit 50 km/h. The fire danger index (FWI) reached 72, class Very extreme.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 302 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.