Skip to content
worldfires
RU · Russia · –

Turukhansky District fire, 14 June 2026 Turukhansky District

Out · last detection

The fire started on in Turukhansky District, Russia, and satellites saw it burning for 20 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 7,566 hectares from heat detections, spread across a single municipality.

Number 160 in Russia in 2026, of 420.

GWIS near-real-time perimeter, from the layer that changed in October 2025: this fire is not compared with fires from earlier years, because since then the GWIS layer gives more and larger perimeters.

Compare with…

Suggestions: Turukhansky District · 2026

Burnt area
7,566ha
GWIS perimeter (Copernicus)
Duration
20days
14 Jun 2026 – 3 Jul 2026
Municipalities hit
1
districts
Started on
14 Jun
2026
Heat detections
477
in a single hotspot: 330 MW
Danger at start
27
High · FWI index
Average daily power
446MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Jun3 Jul
3 Jul 2026

How it evolved, day by day

14 Jun 2026 · 378 MW · 8 15 Jun 2026 · 824 MW · 21 16 Jun 2026 · 978 MW · 35 17 Jun 2026 · 336 MW · 46 18 Jun 2026 · 280 MW · 24 19 Jun 2026 · 1,206 MW · 65 20 Jun 2026 · 1,274 MW · 78 21 Jun 2026 · 169 MW · 17 22 Jun 2026 · 261 MW · 22 23 Jun 2026 · 1,085 MW · 44 24 Jun 2026 · 121 MW · 10 25 Jun 2026 · 177 MW · 8 26 Jun 2026 · 26 MW · 4 27 Jun 2026 · 297 MW · 32 28 Jun 2026 · 33 MW · 7 29 Jun 2026 · 127 MW · 21 30 Jun 2026 · 424 MW · 27 3 Jul 2026 · 35 MW · 8
14 Jun 20 Jun 26 Jun 30 Jun

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

Fire front film How it spread from one satellite pass to the next (51 passes) and with what wind. Watch the film

The weather it burned in

33°high
48km/h · peak gust
17%lowest humidity

It had gone 2 days without rain (1 mm or more) when it started. Rain came after the fire: 4.0 mm on 5 Jul.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 4.8% of the area of London (76 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Turukhansky District where it started
    6,978 ha reached on 14 Jun
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Jun 24.0 °C 24 % 41 km/h 0.5 mm High 27
15 Jun 27.2 °C 23 % 31 km/h 0.0 mm High 27
16 Jun 22.1 °C 17 % 48 km/h 0.0 mm Very high 43
17 Jun 21.2 °C 22 % 33 km/h 0.0 mm High 36
18 Jun 25.2 °C 21 % 24 km/h 0.0 mm High 31
19 Jun 27.0 °C 23 % 31 km/h 0.0 mm High 36
20 Jun 28.4 °C 26 % 31 km/h 0.0 mm High 35
21 Jun 27.1 °C 39 % 31 km/h 0.7 mm High 32
22 Jun 27.7 °C 35 % 20 km/h 0.0 mm Moderate 20
23 Jun 30.2 °C 29 % 22 km/h 0.0 mm High 27
24 Jun 31.1 °C 32 % 22 km/h 0.0 mm High 30
25 Jun 32.2 °C 26 % 26 km/h 0.1 mm High 36
26 Jun 33.0 °C 27 % 29 km/h 0.0 mm High 37
27 Jun 29.2 °C 25 % 36 km/h 0.0 mm Very high 40
28 Jun 26.4 °C 38 % 32 km/h 0.0 mm High 34
29 Jun 27.5 °C 41 % 25 km/h 0.0 mm High 27
30 Jun 30.5 °C 34 % 23 km/h 0.6 mm High 27
1 Jul 29.0 °C 39 % 32 km/h 2.0 mm High 25
2 Jul 22.2 °C 30 % 38 km/h 0.1 mm Moderate 14
3 Jul 25.5 °C 33 % 24 km/h 0.0 mm High 22
4 Jul after 27.4 °C 36 % 20 km/h 0.3 mm High 23
5 Jul after 27.1 °C 48 % 41 km/h 4.0 mm Moderate 17

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Jun 2026
After · 10 Jul 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 21 June 2026 the air beside the fire reached 223 µg/m³ of PM2.5. That day averaged 145: 9.7 times the WHO daily guideline (15).

PM2.5 peak223 µg/m³
Days over the guideline23 days
PM10225 µg/m³
Optical depth1.80
12 Jun17 Jun22 Jun27 Jun2 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 477Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Turukhansky District fire last?
GWIS (Copernicus) dates it between 14 June 2026 and 3 July 2026: 20 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 7,566 hectares (75.7 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Turukhansky District (6,978 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 33.0 °C, humidity dropped to 17 % and gusts hit 48 km/h. The fire danger index (FWI) reached 43, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 477 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.