Skip to content
worldfires
RU · Russia · –

Tungiro-Olyokminsky District fire, August 2019 Tungiro-Olyokminsky District

Out · last detection 31 Aug 2019, 17:40 UTC

The fire started on 23 August 2019 in Tungiro-Olyokminsky District, Russia, and satellites saw it burning for 10 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,392 hectares from heat detections, spread across a single municipality.

It is the 407th largest in Zabaykalsky Krai since 2016 (of 465 with a page). Number 535 in Russia in 2019, of 610.

Burnt area
3,392ha
GWIS perimeter (Copernicus)
Duration
10days
23 Aug 2019 – 1 Sept 2019
Municipalities hit
1
districts
Started on
23 Aug
2019
Heat detections
396
in a single hotspot: 35 MW
Danger at start
6
Low · FWI index
Average daily power
273MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 23 Aug1 Sept
31 Aug 2019

How it evolved, day by day

23 Aug 2019 · 3 MW · 1 24 Aug 2019 · 183 MW · 12 25 Aug 2019 · 81 MW · 25 26 Aug 2019 · 381 MW · 103 27 Aug 2019 · 636 MW · 115 28 Aug 2019 · 731 MW · 67 29 Aug 2019 · 179 MW · 43 30 Aug 2019 · 262 MW · 29 31 Aug 2019 · 2 MW · 1
23 Aug 25 Aug 28 Aug 31 Aug

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

26°high
43km/h · peak gust
27%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 1.6 mm on 2 Sept.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

How big is it?

10 km
It burned the equivalent of 2.1% of the area of London (34 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Tungiro-Olyokminsky District where it started
    3,449 ha reached on 23 Aug
    0.1 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
23 Aug 22.3 °C 47 % 16 km/h 0.2 mm Low 6
24 Aug 24.5 °C 35 % 26 km/h 0.0 mm Moderate 12
25 Aug 26.3 °C 35 % 30 km/h 0.0 mm Moderate 15
26 Aug 23.3 °C 46 % 43 km/h 0.2 mm Moderate 17
27 Aug 22.7 °C 30 % 37 km/h 0.0 mm High 23
28 Aug 24.0 °C 27 % 28 km/h 0.0 mm High 22
29 Aug 21.5 °C 45 % 24 km/h 0.0 mm Moderate 18
30 Aug 20.6 °C 30 % 26 km/h 0.0 mm Moderate 19
31 Aug 18.0 °C 49 % 22 km/h 3.5 mm Very low 3
1 Sept 19.2 °C 37 % 16 km/h 0.0 mm Very low 3
2 Sept after 14.4 °C 69 % 18 km/h 1.6 mm Very low 4

Its twins: fires that started in the same weather

It started with an FWI of 6.3, a minimum humidity of 47% and rain the day before. Fires in the area that started in weather like this since 2016: 21.

FWI at the start 6.3
Minimum humidity 47 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Neryungrinsky Municipal District fire, July 2024
3,228 ha 8 days FWI 0.8 Min. humidity 47 % 199 km away, in 2024

First rain (1 mm or more) after it ended: 3.5 mm on 13 Jul.

What happened to them

12 days
median duration
6,147 ha
median area
24 %
went past 10,000 ha
4.7 mm
rain at the end (median; 21 of 21 had it)

It stayed below its twins: 3,392 ha against a median of 6,147 ha. It lasted 10 days, against 12 days.

All of them had rain in the ten days after the end: the first rainy day brought a median of 4.7 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.6 mmfirst rain
2 Septthe day after it ended
43km/h · max. gust

It was considered over on 1 Sept, and on 2 Sept 1.6 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 21 of 21, with a median of 4.7 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 16 Aug 2019
After · 8 Sept 2019

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 396Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Russia

Frequently asked questions

How long did the Tungiro-Olyokminsky District fire last?
GWIS (Copernicus) dates it between 23 August 2019 and 1 September 2019: 10 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,392 hectares (33.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Tungiro-Olyokminsky District (3,449 ha, 0.1 %).
What was the weather like?
During the fire the temperature reached 26.3 °C, humidity dropped to 27 % and gusts hit 43 km/h. The fire danger index (FWI) reached 23, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Russia (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 21. Their median duration was 12 days and their median area 6,147 ha; 24 % went past 10,000 ha. All of them had rain in the ten days after the end: the first rainy day brought a median of 4.7 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 112 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 112.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 396 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Open Data Commons Open Database License 1.0). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.