Skip to content
worldfires
AU · Australia · –

Tiwi Islands fire, 3 June 2018 Tiwi Islands

Out · last detection 5 Aug 2018, 04:02 UTC

The fire started on 3 June 2018 in Tiwi Islands, Australia, and satellites saw it burning for 64 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 46,288 hectares from heat detections, spread across a single municipality.

This page is probably a fire complex, not a single fire. GWIS merges into one perimeter the fires that touch over weeks, which in large burning seasons can join dozens of separate fires. The total area is reliable; the origin and dates refer to the whole complex.

This entry is probably a savanna fire in Australia’s tropical north, not a bushfire like those in the south of the country. Millions of hectares of northern savanna and grassland burn every year: much of it in burns lit on purpose early in the dry season (traditional fire management, parks and cattle stations), the rest in grass fires that return to the same ground every few years. This is our assumption, based on the location; it is not confirmed. That is why it is left out of the wildfire rankings.

Burnt area
46,288ha
GWIS perimeter (Copernicus)
Duration
64days
3 Jun 2018 – 5 Aug 2018
Municipalities hit
1
local government areas
Started on
3 Jun
2018
Heat detections
2,616
in a single hotspot: 148 MW
Danger at start
33
High · FWI index
Average daily power
312MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 3 Jun5 Aug
5 Aug 2018

How it evolved, day by day

3 Jun 2018 · 14 MW · 5 4 Jun 2018 · 27 MW · 3 5 Jun 2018 · 4 MW · 2 6 Jun 2018 · 1,597 MW · 97 7 Jun 2018 · 498 MW · 86 8 Jun 2018 · 73 MW · 20 9 Jun 2018 · 104 MW · 22 10 Jun 2018 · 155 MW · 35 11 Jun 2018 · 120 MW · 23 12 Jun 2018 · 31 MW · 6 13 Jun 2018 · 162 MW · 25 14 Jun 2018 · 390 MW · 32 15 Jun 2018 · 660 MW · 59 16 Jun 2018 · 383 MW · 48 17 Jun 2018 · 365 MW · 64 18 Jun 2018 · 771 MW · 41 19 Jun 2018 · 224 MW · 75 20 Jun 2018 · 778 MW · 65 21 Jun 2018 · 2,099 MW · 174 22 Jun 2018 · 1,430 MW · 144 23 Jun 2018 · 703 MW · 56 24 Jun 2018 · 149 MW · 43 25 Jun 2018 · 346 MW · 50 26 Jun 2018 · 182 MW · 42 27 Jun 2018 · 775 MW · 87 28 Jun 2018 · 373 MW · 56 29 Jun 2018 · 43 MW · 23 30 Jun 2018 · 202 MW · 38 1 Jul 2018 · 30 MW · 13 2 Jul 2018 · 395 MW · 58 3 Jul 2018 · 236 MW · 37 4 Jul 2018 · 730 MW · 94 5 Jul 2018 · 362 MW · 115 6 Jul 2018 · 975 MW · 122 7 Jul 2018 · 150 MW · 38 8 Jul 2018 · 723 MW · 90 9 Jul 2018 · 139 MW · 20 10 Jul 2018 · 109 MW · 25 11 Jul 2018 · 69 MW · 20 12 Jul 2018 · 142 MW · 30 13 Jul 2018 · 136 MW · 23 14 Jul 2018 · 87 MW · 20 15 Jul 2018 · 28 MW · 24 16 Jul 2018 · 120 MW · 31 17 Jul 2018 · 160 MW · 39 18 Jul 2018 · 585 MW · 61 19 Jul 2018 · 231 MW · 29 20 Jul 2018 · 36 MW · 17 21 Jul 2018 · 116 MW · 28 22 Jul 2018 · 570 MW · 71 23 Jul 2018 · 538 MW · 74 24 Jul 2018 · 298 MW · 42 25 Jul 2018 · 1 MW · 1 26 Jul 2018 · 30 MW · 11 27 Jul 2018 · 46 MW · 9 28 Jul 2018 · 29 MW · 8 29 Jul 2018 · 58 MW · 5 30 Jul 2018 · 28 MW · 9 31 Jul 2018 · 17 MW · 5 1 Aug 2018 · 15 MW · 12 2 Aug 2018 · 35 MW · 8 3 Aug 2018 · 37 MW · 4 4 Aug 2018 · 20 MW · 1 5 Aug 2018 · 10 MW · 1
3 Jun 21 Jun 12 Jul 25 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

30°high
56km/h · peak gust
25%lowest humidity

It had gone 43 days without rain (1 mm or more) when it started. Rain came after the fire: 2.6 mm on 12 Aug.

This area had burned before

72% of the perimeter overlaps earlier fires recorded since 2016: 31,603 ha in 2016, 8,883 ha in 2017. Part of it burned more than once, so the yearly figures add up to more than the 33,148 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 29% of the area of London (463 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Tiwi Islands where it started
    47,148 ha
    6.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
3 Jun 27.9 °C 42 % 44 km/h 0.0 mm High 33
4 Jun 27.8 °C 33 % 45 km/h 0.0 mm Very high 41
5 Jun 26.6 °C 34 % 46 km/h 0.0 mm Very high 40
6 Jun 27.1 °C 46 % 36 km/h 0.0 mm High 34
7 Jun 27.3 °C 53 % 40 km/h 0.0 mm High 31
8 Jun 27.8 °C 59 % 40 km/h 0.0 mm High 26
9 Jun 27.7 °C 63 % 41 km/h 0.0 mm High 27
10 Jun 27.8 °C 54 % 40 km/h 0.0 mm High 25
11 Jun 28.6 °C 54 % 37 km/h 0.0 mm High 24
12 Jun 28.8 °C 59 % 38 km/h 0.0 mm High 26
13 Jun 27.7 °C 67 % 33 km/h 0.8 mm Moderate 18
14 Jun 27.7 °C 70 % 37 km/h 0.7 mm Moderate 17
15 Jun 27.4 °C 58 % 45 km/h 0.0 mm High 26
16 Jun 28.4 °C 53 % 56 km/h 0.0 mm High 35
17 Jun 27.7 °C 41 % 54 km/h 0.0 mm Very high 41
18 Jun 27.6 °C 47 % 48 km/h 0.0 mm High 37
19 Jun 27.4 °C 48 % 45 km/h 0.0 mm High 37
20 Jun 28.5 °C 49 % 42 km/h 0.0 mm High 36
21 Jun 28.0 °C 44 % 43 km/h 0.0 mm High 36
22 Jun 27.5 °C 39 % 47 km/h 0.0 mm Very high 40
23 Jun 27.2 °C 47 % 43 km/h 0.0 mm High 36
24 Jun 27.7 °C 51 % 43 km/h 0.0 mm High 35
25 Jun 27.8 °C 56 % 42 km/h 0.0 mm High 32
26 Jun 28.1 °C 60 % 45 km/h 0.0 mm High 32
27 Jun 28.2 °C 52 % 53 km/h 0.0 mm High 35
28 Jun 27.4 °C 47 % 52 km/h 0.0 mm High 38
29 Jun 27.6 °C 56 % 39 km/h 0.0 mm High 31
30 Jun 29.4 °C 56 % 38 km/h 0.0 mm High 31
1 Jul 28.7 °C 55 % 56 km/h 0.0 mm Very high 40
2 Jul 29.5 °C 53 % 52 km/h 0.0 mm Very high 38
3 Jul 28.9 °C 50 % 53 km/h 0.0 mm Very high 39
4 Jul 28.9 °C 43 % 48 km/h 0.0 mm Very high 41
5 Jul 28.1 °C 50 % 42 km/h 0.0 mm High 38
6 Jul 28.1 °C 46 % 38 km/h 0.0 mm High 33
7 Jul 28.3 °C 46 % 40 km/h 0.0 mm High 36
8 Jul 26.5 °C 41 % 53 km/h 0.0 mm Very high 42
9 Jul 26.6 °C 55 % 48 km/h 0.0 mm High 36
10 Jul 27.1 °C 55 % 48 km/h 0.0 mm High 37
11 Jul 27.3 °C 46 % 42 km/h 0.0 mm High 34
12 Jul 27.0 °C 49 % 39 km/h 0.0 mm High 32
13 Jul 26.9 °C 47 % 40 km/h 0.0 mm High 32
14 Jul 27.1 °C 53 % 35 km/h 0.0 mm High 29
15 Jul 28.4 °C 54 % 28 km/h 0.0 mm High 24
16 Jul 28.3 °C 54 % 34 km/h 0.0 mm High 28
17 Jul 28.6 °C 39 % 35 km/h 0.0 mm High 28
18 Jul 29.2 °C 47 % 37 km/h 0.0 mm High 33
19 Jul 28.7 °C 57 % 36 km/h 0.1 mm High 32
20 Jul 29.3 °C 56 % 43 km/h 0.7 mm High 29
21 Jul 28.9 °C 42 % 48 km/h 0.0 mm High 37
22 Jul 28.4 °C 28 % 44 km/h 0.0 mm Very high 47
23 Jul 28.3 °C 25 % 38 km/h 0.0 mm Very high 40
24 Jul 28.6 °C 48 % 33 km/h 0.0 mm High 32
25 Jul 28.2 °C 61 % 35 km/h 0.1 mm High 29
26 Jul 28.0 °C 60 % 35 km/h 0.0 mm High 25
27 Jul 28.6 °C 57 % 26 km/h 0.0 mm High 24
28 Jul 29.3 °C 54 % 26 km/h 0.0 mm High 24
29 Jul 29.9 °C 47 % 32 km/h 0.0 mm High 26
30 Jul 28.8 °C 62 % 41 km/h 0.0 mm High 27
31 Jul 28.7 °C 49 % 36 km/h 0.0 mm High 34
1 Aug 28.5 °C 40 % 40 km/h 0.0 mm High 30
2 Aug 28.6 °C 53 % 24 km/h 0.5 mm High 24
3 Aug 28.5 °C 56 % 30 km/h 0.0 mm High 25
4 Aug 30.0 °C 42 % 26 km/h 0.0 mm High 26
5 Aug 29.3 °C 55 % 28 km/h 0.0 mm High 29
6 Aug after 30.1 °C 46 % 27 km/h 0.0 mm High 29
7 Aug after 29.3 °C 53 % 41 km/h 0.0 mm High 34
8 Aug after 29.0 °C 34 % 46 km/h 0.0 mm Very high 43
9 Aug after 28.9 °C 28 % 42 km/h 0.0 mm Very high 49
10 Aug after 28.3 °C 53 % 36 km/h 0.1 mm High 31
11 Aug after 29.1 °C 54 % 26 km/h 0.0 mm High 27
12 Aug after 28.7 °C 60 % 40 km/h 2.6 mm Moderate 21

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 27 May 2018
After · 12 Aug 2018

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 2,616Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Australia

Frequently asked questions

How long did the Tiwi Islands fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 3 June 2018 to 5 August 2018 (64 days). The perimeter dates it from 6 June 2018 to 4 August 2018.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 46,288 hectares (462.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire only entered Tiwi Islands (47,148 ha, 6.3 %).
What was the weather like?
During the fire the temperature reached 30.0 °C, humidity dropped to 25 % and gusts hit 56 km/h. The fire danger index (FWI) reached 47, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Australia (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 000 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Last day with fire: 4 August 2018 → 5 August 2018.
  2. Start date: 6 June 2018 → 3 June 2018.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 000.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 4 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 6 June 2018 to 4 August 2018. 2,616 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.
  • Probably a vegetation burn: not counted in the totals.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 4.0 International (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.