Skip to content
worldfires
MM · Myanmar · →

Tilin fire, February 2024 Matupi, Tilin, Gangaw

Out · last detection 10 Mar 2024, 19:38 UTC

The fire started on 23 February 2024 in Tilin, Myanmar, and satellites saw it burning for 16 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 13,183 hectares from heat detections, spread across 3 municipalities.

It is the 9th largest in Magway since 2016 (of 190 with a page). Number 9 in Myanmar in 2024, of 174.

The power measured by the satellite is low (25.6 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Compare with…
Burnt area
13,183ha
GWIS perimeter (Copernicus)
Duration
16days
23 Feb 2024 – 9 Mar 2024
Municipalities hit
3
municipalities
Started on
23 Feb
2024
Heat detections
521
in a single hotspot: 26 MW
Danger at start
19
Moderate · FWI index
Average daily power
92MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 23 Feb9 Mar
10 Mar 2024

How it evolved, day by day

23 Feb 2024 · 97 MW · 24 24 Feb 2024 · 20 MW · 6 25 Feb 2024 · 11 MW · 7 26 Feb 2024 · 16 MW · 5 27 Feb 2024 · 24 MW · 10 28 Feb 2024 · 14 MW · 13 29 Feb 2024 · 80 MW · 29 1 Mar 2024 · 103 MW · 21 2 Mar 2024 · 66 MW · 29 3 Mar 2024 · 104 MW · 35 4 Mar 2024 · 149 MW · 49 5 Mar 2024 · 234 MW · 90 6 Mar 2024 · 360 MW · 103 7 Mar 2024 · 183 MW · 35 8 Mar 2024 · 57 MW · 16 9 Mar 2024 · 24 MW · 5 10 Mar 2024 · 14 MW · 10
23 Feb 26 Feb 29 Feb 3 Mar 6 Mar 9 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
30km/h · peak gust
25%lowest humidity

It had gone 27 days without rain (1 mm or more) when it started.

This area had burned before

86% of the perimeter overlaps earlier fires recorded since 2016: 4,959 ha in 2016, 2,998 ha in 2017, 32 ha in 2018, 6,917 ha in 2019, 3,565 ha in 2020, 3,153 ha in 2021, 3,533 ha in 2022, 5,378 ha in 2023. Part of it burned more than once, so the yearly figures add up to more than the 11,370 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 8.3% of the area of London (132 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. 7,533 ha
    1.3 %
  2. Tilin where it started
    3,885 ha
    2.9 %
  3. 1,839 ha
    0.7 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
23 Feb 32.5 °C 35 % 26 km/h 0.0 mm Moderate 19
24 Feb 29.3 °C 50 % 24 km/h 0.1 mm Moderate 16
25 Feb 29.1 °C 54 % 27 km/h 0.4 mm Moderate 15
26 Feb 30.3 °C 52 % 25 km/h 0.0 mm Moderate 15
27 Feb 32.4 °C 43 % 22 km/h 0.0 mm Moderate 16
28 Feb 33.0 °C 32 % 23 km/h 0.0 mm Moderate 21
29 Feb 32.5 °C 31 % 23 km/h 0.0 mm High 22
1 Mar 31.2 °C 44 % 28 km/h 0.0 mm Moderate 20
2 Mar 31.4 °C 41 % 30 km/h 0.0 mm Moderate 21
3 Mar 32.8 °C 32 % 25 km/h 0.0 mm High 23
4 Mar 32.5 °C 39 % 24 km/h 0.0 mm High 23
5 Mar 34.4 °C 25 % 25 km/h 0.0 mm High 27
6 Mar 32.9 °C 28 % 26 km/h 0.0 mm High 28
7 Mar 33.6 °C 27 % 28 km/h 0.0 mm High 28
8 Mar 34.2 °C 28 % 24 km/h 0.0 mm High 28
9 Mar 33.1 °C 31 % 23 km/h 0.0 mm High 29
10 Mar after 32.7 °C 32 % 33 km/h 0.0 mm High 30
11 Mar after 33.5 °C 31 % 33 km/h 0.0 mm High 30
12 Mar after 34.7 °C 31 % 24 km/h 0.0 mm High 31
13 Mar after 34.8 °C 30 % 26 km/h 0.0 mm High 32
14 Mar after 34.3 °C 30 % 23 km/h 0.0 mm High 29
15 Mar after 33.6 °C 36 % 27 km/h 0.0 mm High 29
16 Mar after 33.0 °C 39 % 31 km/h 0.0 mm High 27
17 Mar after 33.4 °C 33 % 30 km/h 0.0 mm High 27
18 Mar after 33.5 °C 38 % 29 km/h 0.0 mm High 28
19 Mar after 32.2 °C 42 % 27 km/h 0.0 mm High 25

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 16 Feb 2024
After · 16 Mar 2024

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 21 February 2024 the air beside the fire reached 62 µg/m³ of PM2.5. That day averaged 37: 2.5 times the WHO daily guideline (15).

PM2.5 peak62 µg/m³
Days over the guideline17 days
PM1095 µg/m³
Optical depth0.82
212223242526272829123456789101112
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 521Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Myanmar ›

Frequently asked questions

How long did the Tilin fire last?
GWIS (Copernicus) dates it between 23 February 2024 and 9 March 2024: 16 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 13,183 hectares (131.8 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 3 municipalities: Matupi (7,533 ha, 1.3 %); Tilin (3,885 ha, 2.9 %); Gangaw (1,839 ha, 0.7 %).
What was the weather like?
During the fire the temperature reached 34.4 °C, humidity dropped to 25 % and gusts hit 30 km/h. The fire danger index (FWI) reached 29, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Myanmar (geoBoundaries). It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

No changes since 24 October 2026.

RSS Changes to this page

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 2 polygons grouped in this page.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 521 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.

How we build fire pages: methodology ›

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 4.0 (CC BY 4.0)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.