Skip to content
worldfires
US · United States · –

Tiger Tank Fire, February 2026 Perry, Forrest

Out · last detection 19 Feb 2026, 18:37 UTC

The fire started on 17 February 2026 in Perry, United States, and satellites saw it burning for 3 days. United States agencies (MTBS / NIFC) mapped an official burnt perimeter of 721 hectares, spread across 2 counties.

It is the 14th largest in Mississippi since 2016 (of 23 with a page). Number 308 in United States in 2026, of 419.

The power measured by the satellite is low (5.0 MW in the strongest hotspot), more typical of grass or stubble burning, or a slow surface fire, than of a large crown fire.

Burnt area
721ha
official perimeter (MTBS / NIFC)
Duration
≈ 3days
17 Feb 2026 – 19 Feb 2026
Counties hit
2
counties
Started on
17 Feb
2026
Heat detections
1
in a single hotspot: 5 MW
Danger at start
2
Very low · FWI index
Average daily power
5MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 17 Feb19 Feb

How it evolved, day by day

19 Feb 2026 · 5 MW · 1

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

27°high
56km/h · peak gust
53%lowest humidity

It had gone one day without rain (1 mm or more) when it started. Rain came after the fire: 1.4 mm on 20 Feb.

This area had burned before

57% of the perimeter overlaps earlier fires recorded since 2016: 404 ha in 2020, 370 ha in 2025. Part of it burned more than once, so the yearly figures add up to more than the 414 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 0.5% of the area of London (7.2 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each county

  1. Perry where it started
    716 ha reached on 19 Feb
    0.4 %
  2. 5 ha
    0.0 %

Burnt area inside each county, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
17 Feb 20.0 °C 63 % 35 km/h 0.0 mm Very low 2
18 Feb 24.0 °C 59 % 41 km/h 0.0 mm Low 6
19 Feb 26.9 °C 53 % 56 km/h 0.9 mm Low 9
20 Feb after 28.8 °C 55 % 35 km/h 1.4 mm Very low 4

Its twins: fires that started in the same weather

It started with an FWI of 2.5, a minimum humidity of 63% and 1 day without rain. Fires in the area that started in weather like this since 2016: 7.

FWI at the start 2.5
Minimum humidity 63 %
Days without rain 1
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Fixed Wing Fire, January 2025
517 ha 1 day FWI 4.3 Min. humidity 58 % 15 km away, in 2025

First rain (1 mm or more) after it ended: 3.6 mm on 31 Jan.

What happened to them

Fires in the area that started in similar weather: 7. With fewer than 15 we give no figures: they would be more noise than signal.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

1.4 mmfirst rain
20 Febthe day after it ended
56km/h · max. gust

It was considered over on 19 Feb, and on 20 Feb 1.4 mm fell. We do not know whether the rain or the firefighters put it out.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 10 Feb 2026
After · 26 Feb 2026

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 17 February 2026 the air beside the fire reached 34 µg/m³ of PM2.5. That day averaged 17: 1.2 times the WHO daily guideline (15).

PM2.5 peak34 µg/m³
Days over the guideline1 day
PM1034 µg/m³
Optical depth0.75
17 Feb19 Feb21 Feb
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 1Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in United States

Frequently asked questions

How long did the Tiger Tank Fire last?
The official perimeter only gives the start date (19 February 2026). The end comes from the heat detections inside the perimeter: it burned until 19 February 2026 (3 days from 17 February 2026), the last day with detections before more than 10 days in a row without any, so it is approximate.
How much area did it burn?
The official perimeter published by United States agencies (MTBS / NIFC) is 721 hectares (7.2 km²). Other tallies, such as daily incident reports, may give slightly different figures.
Which counties burned?
The fire entered 2 counties: Perry (716 ha, 0.4 %); Forrest (5 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 26.9 °C, humidity dropped to 53 % and gusts hit 56 km/h. The fire danger index (FWI) reached 9, class Low.
Where does this data come from?
From the official burnt perimeter of United States agencies (MTBS / NIFC, public domain), NASA FIRMS VIIRS hotspots and the administrative boundaries of United States. It is not an official report.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 911 · Emergency number and official warnings

Satellite cross-check

History of this page · 1 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Start date: 19 February 2026 → 17 February 2026.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 911.

How we know this
  • Perimeter: NIFC WFIGS (United States), official.
  • The official perimeter has no end date: the end is the last day with VIIRS detections inside the perimeter before a gap of more than 10 days (150 days at most), so it is approximate. One Suomi-NPP VIIRS detection on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter is official and in the public domain. For past years it comes from MTBS (Monitoring Trends in Burn Severity), run by the U.S. Geological Survey and the USDA Forest Service, which map it on Landsat and Sentinel-2 imagery. For the current and last year it comes from WFIGS at the National Interagency Fire Center (NIFC): incident perimeters mapped by fire crews, aircraft and imagery. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. County boundaries come from geoBoundaries ADM2 (Public Domain). The area per county is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from official figures.