Skip to content
worldfires
TH · Thailand · –

Thong Saen Khan fire, 23 March 2023 ทองแสนขัน · Thong Saen Khan, Mueang Uttaradit, Tha Pla

Out · last detection

The fire started on in Thong Saen Khan, Thailand, and satellites saw it burning for 9 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 3,707 hectares from heat detections, spread across 4 municipalities.

It is number 3 by size of the 78 fires with a page that started in Uttaradit Province since 2016. Number 35 in Thailand in 2023, of 369.

Burnt area
3,707ha
GWIS perimeter (Copernicus)
Duration
9days
23 Mar 2023 – 31 Mar 2023
Municipalities hit
4
districts
Started on
23 Mar
2023
Heat detections
139
in a single hotspot: 102 MW
Danger at start
38
High · FWI index
Average daily power
88MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 23 Mar31 Mar
31 Mar 2023

How it evolved, day by day

23 Mar 2023 · 1 MW · 1 24 Mar 2023 · 166 MW · 10 25 Mar 2023 · 93 MW · 25 26 Mar 2023 · 319 MW · 49 27 Mar 2023 · 76 MW · 23 28 Mar 2023 · 39 MW · 10 29 Mar 2023 · 31 MW · 10 30 Mar 2023 · 60 MW · 9 31 Mar 2023 · 12 MW · 2
23 Mar 26 Mar 29 Mar 31 Mar

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

38°high
38km/h · peak gust
29%lowest humidity

It had gone 10 days without rain (1 mm or more) when it started.

This area had burned before

57% of the perimeter overlaps earlier fires recorded since 2016: 102 ha in 2016, 501 ha in 2017, 439 ha in 2019, 1,138 ha in 2020, 623 ha in 2021. Part of it burned more than once, so the yearly figures add up to more than the 2,097 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 2.3% of the area of London (37 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Thong Saen Khan ทองแสนขัน where it started
    2,517 ha reached on 23 Mar
    3.4 %
  2. Mueang Uttaradit เมืองอุตรดิตถ์
    1,202 ha reached on 24 Mar
    1.5 %
  3. Tha Pla ท่าปลา
    9 ha
    0.0 %
  4. Nam Pat น้ำปาด
    0 ha
    0.0 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2025
Built-up area1.8 ha
Residents≈ 90

Inside the perimeter there were about 1.8 hectares of built-up land and about 90 residents (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
23 Mar 38.0 °C 32 % 38 km/h 0.0 mm High 38
24 Mar 38.2 °C 30 % 32 km/h 0.0 mm High 36
25 Mar 38.0 °C 29 % 34 km/h 0.0 mm Very high 40
26 Mar 37.3 °C 32 % 33 km/h 0.0 mm Very high 39
27 Mar 38.0 °C 34 % 34 km/h 0.1 mm Very high 39
28 Mar 36.8 °C 41 % 34 km/h 0.0 mm Very high 40
29 Mar 36.4 °C 41 % 33 km/h 0.0 mm Very high 38
30 Mar 36.8 °C 36 % 30 km/h 0.0 mm High 38
31 Mar 36.3 °C 41 % 28 km/h 0.0 mm High 35
1 Apr after 35.9 °C 45 % 30 km/h 0.0 mm High 35
2 Apr after 37.0 °C 37 % 34 km/h 0.0 mm High 36
3 Apr after 37.5 °C 30 % 36 km/h 0.0 mm Very high 39
4 Apr after 37.3 °C 35 % 31 km/h 0.0 mm High 37
5 Apr after 37.1 °C 33 % 28 km/h 0.0 mm High 36
6 Apr after 37.6 °C 37 % 26 km/h 0.0 mm High 34
7 Apr after 37.6 °C 38 % 27 km/h 0.0 mm High 36
8 Apr after 37.1 °C 45 % 25 km/h 0.0 mm High 36
9 Apr after 36.1 °C 51 % 31 km/h 0.1 mm High 36
10 Apr after 38.1 °C 38 % 31 km/h 0.0 mm High 36

Its twins: fires that started in the same weather

It started with an FWI of 37.6, a minimum humidity of 32% and 10 days without rain. Fires in the area that started in weather like this since 2016: 34.

FWI at the start 37.6
Minimum humidity 32 %
Days without rain 10
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Tha Pla fire, April 2024
1,652 ha 5 days FWI 35.9 Min. humidity 33 % 57 km away, in 2024

First rain (1 mm or more) after it ended: 1.7 mm on 3 May.

What happened to them

8 days
median duration
1,432 ha
median area
100 %
went past 1,000 ha
2.2 mm
rain at the end (median; 26 of 34 had it)

It was 2.6 times larger than the median of its twins and lasted 9 days, against 8 days.

Only 4 of its 34 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 8 of 34, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
38km/h · max. gust

It was considered over on 31 Mar, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 26 of 34, with a median of 2.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 16 Mar 2023
After · 7 Apr 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 1 April 2023 the air beside the fire reached 62 µg/m³ of PM2.5. That day averaged 40: 2.7 times the WHO daily guideline (15).

PM2.5 peak62 µg/m³
Days over the guideline12 days
PM1090 µg/m³
Optical depth1.06
21 Mar24 Mar27 Mar30 Mar2 Apr
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 139Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Thailand

Frequently asked questions

How long did the Thong Saen Khan fire last?
GWIS (Copernicus) dates it between 23 March 2023 and 31 March 2023: 9 days between the first and last heat detection of the perimeter.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 3,707 hectares (37.1 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 4 municipalities: Thong Saen Khan (2,517 ha, 3.4 %); Mueang Uttaradit (1,202 ha, 1.5 %); Tha Pla (9 ha, 0.0 %); Nam Pat (0 ha, 0.0 %).
What was the weather like?
During the fire the temperature reached 38.2 °C, humidity dropped to 29 % and gusts hit 38 km/h. The fire danger index (FWI) reached 40, class Very high.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Thailand (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 34. Their median duration was 8 days and their median area 1,432 ha; 100 % went past 1,000 ha. Only 4 of its 34 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 8 of 34, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 199 · 191 · Emergency number and official warnings

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 199 · 191.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 139 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.