Skip to content
worldfires
TH · Thailand · –

Thong Pha Phum fire, 17 March 2020 ทองผาภูมิ · Sangkhla Buri, Thong Pha Phum

Out · last detection 14 Apr 2020, 18:36 UTC

The fire started on 17 March 2020 in Thong Pha Phum, Thailand, and satellites saw it burning for 29 days. Copernicus’s global GWIS system rebuilt a burnt perimeter of 11,787 hectares from heat detections, spread across 2 municipalities.

It is the 2th largest in Kanchanaburi Province since 2016 (of 198 with a page). Number 7 in Thailand in 2020, of 457.

Burnt area
11,787ha
GWIS perimeter (Copernicus)
Duration
29days
17 Mar 2020 – 14 Apr 2020
Municipalities hit
2
districts
Started on
17 Mar
2020
Heat detections
457
in a single hotspot: 34 MW
Danger at start
14
Moderate · FWI index
Average daily power
64MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 17 Mar14 Apr
14 Apr 2020

How it evolved, day by day

17 Mar 2020 · 5 MW · 5 18 Mar 2020 · 13 MW · 3 21 Mar 2020 · 1 MW · 1 22 Mar 2020 · 19 MW · 6 23 Mar 2020 · 87 MW · 24 24 Mar 2020 · 24 MW · 8 25 Mar 2020 · 61 MW · 11 26 Mar 2020 · 24 MW · 4 27 Mar 2020 · 92 MW · 27 28 Mar 2020 · 79 MW · 42 29 Mar 2020 · 44 MW · 18 30 Mar 2020 · 153 MW · 33 31 Mar 2020 · 70 MW · 21 1 Apr 2020 · 102 MW · 26 2 Apr 2020 · 95 MW · 30 3 Apr 2020 · 28 MW · 8 4 Apr 2020 · 31 MW · 7 5 Apr 2020 · 310 MW · 22 6 Apr 2020 · 53 MW · 8 7 Apr 2020 · 46 MW · 26 8 Apr 2020 · 69 MW · 27 9 Apr 2020 · 21 MW · 11 10 Apr 2020 · 197 MW · 37 11 Apr 2020 · 66 MW · 19 12 Apr 2020 · 10 MW · 7 13 Apr 2020 · 19 MW · 21 14 Apr 2020 · 6 MW · 5
17 Mar 25 Mar 31 Mar 5 Apr 12 Apr

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
42km/h · peak gust
23%lowest humidity

It had gone 0 days without rain (1 mm or more) when it started. Rain came after the fire: 2.6 mm on 15 Apr.

This area had burned before

12% of the perimeter overlaps earlier fires recorded since 2016: 1,597 ha in 2016, 20 ha in 2019. Part of it burned more than once, so the yearly figures add up to more than the 1,409 ha that had burned before.

How big is it?

10 km
It burned the equivalent of 7.4% of the area of London (118 km² against 1,583 km²).

London boundary: geoBoundaries · Office for National Statistics (Open Government Licence v3.0).

This compares size, not location: both shapes are at the same scale, north up, centred on each other.

What happened to each town

  1. Sangkhla Buri สังขละบุรี
    6,953 ha reached on 17 Mar
    2.2 %
  2. Thong Pha Phum ทองผาภูมิ where it started
    5,222 ha reached on 18 Mar
    1.3 %

Burnt area inside each municipality, from crossing the GWIS perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

People and buildings inside the perimeter

GHSL 2020
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2020, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
17 Mar 30.9 °C 40 % 21 km/h 0.0 mm Moderate 14
18 Mar 30.7 °C 35 % 41 km/h 0.0 mm High 25
19 Mar 30.4 °C 37 % 31 km/h 0.0 mm High 23
20 Mar 29.5 °C 37 % 28 km/h 0.0 mm High 23
21 Mar 30.5 °C 34 % 38 km/h 0.0 mm High 25
22 Mar 30.4 °C 30 % 35 km/h 0.0 mm High 27
23 Mar 31.8 °C 29 % 30 km/h 0.0 mm High 28
24 Mar 31.7 °C 30 % 25 km/h 0.0 mm High 28
25 Mar 29.6 °C 39 % 32 km/h 0.0 mm High 26
26 Mar 30.5 °C 37 % 31 km/h 0.0 mm High 28
27 Mar 31.5 °C 31 % 32 km/h 0.0 mm High 28
28 Mar 31.5 °C 26 % 34 km/h 0.0 mm High 31
29 Mar 31.8 °C 29 % 35 km/h 0.0 mm High 32
30 Mar 31.3 °C 30 % 34 km/h 0.0 mm High 33
31 Mar 32.4 °C 31 % 30 km/h 0.0 mm High 31
1 Apr 32.5 °C 35 % 37 km/h 0.0 mm High 32
2 Apr 33.0 °C 30 % 42 km/h 0.0 mm High 34
3 Apr 33.4 °C 32 % 37 km/h 0.0 mm High 33
4 Apr 33.7 °C 28 % 22 km/h 0.0 mm High 29
5 Apr 32.2 °C 35 % 27 km/h 0.0 mm High 31
6 Apr 31.3 °C 35 % 37 km/h 0.0 mm High 33
7 Apr 32.2 °C 30 % 37 km/h 0.0 mm High 34
8 Apr 31.5 °C 30 % 41 km/h 0.0 mm High 35
9 Apr 33.6 °C 24 % 34 km/h 0.0 mm High 35
10 Apr 33.2 °C 26 % 36 km/h 0.0 mm High 36
11 Apr 33.7 °C 23 % 30 km/h 0.0 mm High 34
12 Apr 34.1 °C 26 % 35 km/h 0.0 mm High 37
13 Apr 33.1 °C 28 % 25 km/h 0.6 mm High 31
14 Apr 29.2 °C 50 % 29 km/h 1.2 mm Moderate 14
15 Apr after 30.4 °C 43 % 28 km/h 2.6 mm Low 6

Its twins: fires that started in the same weather

It started with an FWI of 13.7, a minimum humidity of 40% and rain the day before. Fires in the area that started in weather like this since 2016: 31.

FWI at the start 13.7
Minimum humidity 40 %
Days without rain 0
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Thong Pha Phum fire, March 2024
3,914 ha 14 days FWI 13.2 Min. humidity 40 % 32 km away, in 2024

First rain (1 mm or more) after it ended: 1.1 mm on 10 Apr.

What happened to them

12 days
median duration
1,898 ha
median area
100 %
went past 1,000 ha
2.3 mm
rain at the end (median; 22 of 31 had it)

It was 6.2 times larger than the median of its twins and lasted 29 days, against 12 days.

None of its 31 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 9 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.3 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

2.6 mmfirst rain
15 Aprthe day after it ended
42km/h · max. gust

It was considered over on 14 Apr, and on 15 Apr 2.6 mm fell. We do not know whether the rain or the firefighters put it out. Twins with rain when they ended: 22 of 31, with a median of 2.3 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 10 Mar 2020
After · 21 Apr 2020

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

Detections table · 457Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Thailand

Frequently asked questions

How long did the Thong Pha Phum fire last?
According to the heat detections seen by satellite inside the perimeter, it burned from 17 March 2020 to 14 April 2020 (29 days). The perimeter dates it from 22 March 2020 to 14 April 2020.
How much area did it burn?
The perimeter GWIS (Copernicus) rebuilt from heat detections is 11,787 hectares (117.9 km²). It is an estimate: official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Sangkhla Buri (6,953 ha, 2.2 %); Thong Pha Phum (5,222 ha, 1.3 %).
What was the weather like?
During the fire the temperature reached 34.1 °C, humidity dropped to 23 % and gusts hit 42 km/h. The fire danger index (FWI) reached 37, class High.
Where does this data come from?
From the GWIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Thailand (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 31. Their median duration was 12 days and their median area 1,898 ha; 100 % went past 1,000 ha. None of its 31 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 9 of 31, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 2.3 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Emergency number: 199 · 191 · Emergency number and official warnings

Satellite cross-check

History of this page · 2 Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.
  1. Area: 12,103 → 11,787 ha.
  2. Start date: 22 March 2020 → 17 March 2020.

RSS Changes to this page With cross-checks and a citable version

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy. This is not an emergency service: if there is a fire now, call 199 · 191.

How we know this
  • Perimeter: GWIS (Copernicus), rebuilt from heat detections rather than mapped on imagery; 3 polygons grouped in this page.
  • Dates adjusted with the VIIRS detections inside the perimeter, which said 22 March 2020 to 14 April 2020. 457 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2020, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter comes from the Copernicus Global Wildfire Information System (GWIS), which rebuilds it from MODIS and VIIRS heat detections and publishes it under CC BY 4.0. It is not measured on imagery as in Europe, so it is an estimate. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM2 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ from each country’s official figure.