Skip to content
worldfires
SY · Syria · –

Tell Salhib fire, July 2023 Tell Salhib, As-Suqaylabiyah

Out · last detection

The fire started on in Tell Salhib, Syria, and satellites saw it burning for 4 days. Copernicus mapped a burnt perimeter of 424 hectares from satellite imagery, spread across 2 municipalities.

It is number 20 by size of the 37 fires with a page that started in Hama since 2016. Number 3 in Syria in 2023, of 7.

Burnt area
424ha
Copernicus perimeter
Duration
4days
14 Jul 2023 – 17 Jul 2023
Municipalities hit
2
subdistricts
Started on
14 Jul
2023
Heat detections
31
in a single hotspot: 64 MW
Danger at start
50
Very high · FWI index
Average daily power
167MW
detected power per day, on average

Where it burned

HOTSPOTS BY DAY 14 Jul17 Jul
16 Jul 2023

How it evolved, day by day

14 Jul 2023 · 206 MW · 15 15 Jul 2023 · 229 MW · 10 16 Jul 2023 · 65 MW · 6
14 Jul 15 Jul 16 Jul

Fire radiative power detected each day, in megawatts, and number of hotspots. The magenta bar marks the peak day.

The weather it burned in

34°high
46km/h · peak gust
27%lowest humidity

It had gone 4 days without rain (1 mm or more) when it started.

This area had burned before

No earlier perimeters overlap this fire since 2016, when the satellite record begins.

What happened to each town

  1. Tell Salhib where it started
    253 ha reached on 14 Jul
    1.2 %
  2. 171 ha reached on 14 Jul
    0.8 %

Burnt area inside each municipality, from crossing the official perimeter with administrative boundaries. The distance runs from the point marking the centre of each area to the nearest fire: staying a kilometre away does not mean it reached the houses.

What burned

  • Coniferous forest84 %
  • Mixed forest10 %
  • Agricultural areas2.3 %
  • Other natural land2.3 %
  • Broadleaved forest0.9 %

Land cover inside the perimeter as reported by Copernicus EFFIS (outside the Corine Land Cover area).

People and buildings inside the perimeter

GHSL 2025
Built-up area< 0.1 ha
Residents< 20

Inside the perimeter there was no noticeable built-up land and almost nobody lived there (GHSL 2025, satellite-based estimate).

This is an estimate on 100 m cells, made from satellite imagery and census data: it does not mean that homes burned or that anyone was harmed. The perimeter also contains land that never burned. The GHSL 2025 epoch is a projection made from 2020 and earlier data.

Source: Global Human Settlement Layer (GHS-BUILT-S and GHS-POP R2023A), European Commission Joint Research Centre (JRC), © European Union, CC BY 4.0. Sum inside the perimeter computed by WorldFires. human-settlement.emergency.copernicus.eu

The weather day by day

ECMWF ERA5 reanalysis at the fire location, the standard reference for past weather, and the Canadian Fire Weather Index (the same system Copernicus uses), computed by WorldFires from that data. Days after the fire run until the first rain.

Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

Day High Min. humidity Peak gust Rain Danger (FWI)
14 Jul 33.2 °C 28 % 35 km/h 0.0 mm Very high 50
15 Jul 32.9 °C 31 % 31 km/h 0.0 mm Very high 46
16 Jul 33.7 °C 28 % 46 km/h 0.0 mm Very high 48
17 Jul 33.2 °C 27 % 42 km/h 0.0 mm Very high 48
18 Jul after 33.2 °C 25 % 38 km/h 0.0 mm Very high 48
19 Jul after 32.0 °C 37 % 34 km/h 0.0 mm Very high 43
20 Jul after 31.2 °C 39 % 36 km/h 0.0 mm Very high 40
21 Jul after 31.4 °C 39 % 35 km/h 0.0 mm Very high 39
22 Jul after 31.7 °C 41 % 34 km/h 0.0 mm High 38
23 Jul after 32.5 °C 39 % 35 km/h 0.0 mm Very high 39
24 Jul after 32.3 °C 44 % 37 km/h 0.0 mm Very high 40
25 Jul after 32.1 °C 38 % 49 km/h 0.0 mm Very high 40
26 Jul after 32.9 °C 30 % 37 km/h 0.0 mm Very high 43
27 Jul after 32.7 °C 33 % 36 km/h 0.0 mm Very high 42

Its twins: fires that started in the same weather

It started with an FWI of 49.9, a minimum humidity of 28% and 4 days without rain. Fires in the area that started in weather like this since 2016: 22.

FWI at the start 49.9
Minimum humidity 28 %
Days without rain 4
this fire chosen twins rest of the area
Almost identicalSimilar

Outlines of the closest twins

Ghabagheb fire, May 2017
2,511 ha 13 days FWI 48.8 Min. humidity 28 % 237 km away, in 2017

First rain (1 mm or more) after it ended: none in the following ten days.

What happened to them

1 day
median duration
227 ha
median area
23 %
went past 1,000 ha
1.2 mm
rain at the end (median; 6 of 22 had it)

It was 1.9 times larger than the median of its twins and lasted 4 days, against 1 day.

Only 8 of its 22 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 16 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.2 mm.

This is a bank of analogues: it shows what usually happens, not what will happen. With fewer than 15 twins we give no figures. How we calculate it

How it ended

—first rain
—no rain in ten days
46km/h · max. gust

It was considered over on 17 Jul, and not even 1 mm fell in the following ten days: it went out without rain. Twins with rain when they ended: 6 of 22, with a median of 1.2 mm.

Weather on this page: Open-Meteo.com (CC BY 4.0) · Copernicus Climate Change Service (ERA5)

How a twin is chosen

  • Same area: fires that have already ended, less than 250 km from this one, since 2016.
  • Same start: we compare the FWI on the first day, the minimum humidity that day and the run of days without rain before it. The slider sets how much they may differ.
  • Only pages with final weather data (ERA5 reanalysis) calculated in the same way as this fire’s; agricultural and grass burns and pages with data under review are left out.
  • Fires burning at the same time as this one (a week before or after) are left out: they share the same spell of weather and do not count as a precedent.
  • They are sorted by similarity, and the outlines of the first five are drawn.

How we calculate it

Before and after, from space

Drag the line to compare the same ground before the fire and after it.

Before · 7 Jul 2023
After · 24 Jul 2023

If the day is cloudy, change the date: each satellite passes once a day. In false colour the burnt ground looks brown or red.

The smoke

CAMS · Copernicus

On 15 July 2023 the air beside the fire reached 20 µg/m³ of PM2.5, but no daily average passed the WHO guideline (15).

PM2.5 peak20 µg/m³
Days over the guideline0 days
PM1035 µg/m³
Optical depth0.21
12 Jul14 Jul16 Jul18 Jul20 Jul
Good Fair Moderate Poor Very poor Extremely poor

Particles from the Copernicus CAMS model at the centre of the perimeter; these are not measurements in each town. The pale bar is the worst hour, the solid one the daily average.

Open-Meteo.com (CC BY 4.0) · Copernicus Atmosphere Monitoring Service (CAMS)

Detections table · 31Every satellite heat detection, one by one, with time, satellite, power and coordinates.
⬇ Download CSV Times in UTC. Each detection is a 375 m pixel: a large fire yields hundreds per pass.
Date and timeSatelliteFRP (MW)LatLon

Other fires nearby

All fires in Syria

Frequently asked questions

How long did the Tell Salhib fire last?
Copernicus dates it between 14 July 2023 and 17 July 2023: 4 days between the first and last image with fire.
How much area did it burn?
The perimeter Copernicus measured from satellite imagery is 424 hectares (4.2 km²). Official national figures may differ.
Which municipalities burned?
The fire entered 2 municipalities: Tell Salhib (253 ha, 1.2 %); As-Suqaylabiyah (171 ha, 0.8 %).
What was the weather like?
During the fire the temperature reached 33.7 °C, humidity dropped to 27 % and gusts hit 46 km/h. The fire danger index (FWI) reached 50, class Very high.
Where does this data come from?
From the EFFIS (Copernicus) burnt perimeter, NASA FIRMS VIIRS hotspots and the administrative boundaries of Syria (geoBoundaries). It is not an official report.
How did the fires that started in similar weather in this area end?
Fires less than 250 km away that started since 2016 with a similar FWI, humidity and dry spell: 22. Their median duration was 1 day and their median area 227 ha; 23 % went past 1,000 ha. Only 8 of its 22 twins burned more. The weather on the first day does not explain everything: the wind in the following days, the fuel and the firefighting also count. In 16 of 22, not even 1 mm fell in the ten days after the end: they went out without rain. In the rest, the first rainy day brought a median of 1.2 mm.

Where to verify it

A satellite detection is not an official report. Final figures and the fire’s status are published by each country’s emergency service.

Satellite cross-check

History of this page Changes in area, dates, name, official record or merged pages, compared every night since 24 October 2026.

Does something look wrong on this page?

This page is built from satellite data and official records, and it sometimes gets things wrong: the wrong dates, the wrong town, two fires merged into one, or something that was not a wildfire at all. If you know this fire first-hand (you live nearby, saw it, fought it or reported on it), tell us what really happened and we will check it.

Report an error
What do you think is wrong?

We will only use your email to reply about this report. Privacy.

How we know this
  • Perimeter: EFFIS (Copernicus), mapped on satellite imagery.
  • Dates from the perimeter: the VIIRS detections inside it did not change them. 31 Suomi-NPP VIIRS detections on those dates.
  • We have not matched this page with any official record.
  • Weather: Copernicus ERA5 reanalysis at the fire location, in cells of about 25 km.
  • Built-up area and population come from the JRC Global Human Settlement Layer (epoch 2025, 100 m cells), summed inside the perimeter: an estimate of what was there, not a damage count.

How we build fire pages: methodology

Where this data comes from

The perimeter and land cover come from the Copernicus European Forest Fire Information System (EFFIS), measured on MODIS and Sentinel-2 imagery and published under CC BY 4.0. Heat detections come from the VIIRS sensors aboard Suomi-NPP and NOAA-20, distributed by NASA FIRMS at 375 m resolution. Municipal boundaries come from geoBoundaries ADM3 (Creative Commons Attribution 3.0 Intergovernmental Organisations (CC BY 3.0 IGO)). The area per municipality is computed by WorldFires by crossing the perimeter with those boundaries, so it may differ slightly from each country’s official figure.